TRIX | N-scale (1:160) | Track - accessories | structure

Turntable with 8 Spoke Track, Code 80 track

This is a standard design turntable with a 21 meter / 68 foot 3 inch deck length.

Download the MANUAL

Kit - 8-9/16" 21.7cm Diameter x 1/2" Deep/Thick 1.2cm, 6-5/16" 16cm Bri
Walthers Part # 381-20283, p. 518 Walthers 2020 HO Scale Reference
N scale

Walthers Part # 800-6012
A scale, Retail: $250.00

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

V13 Unitrack Double Track Elevated Loop Set | Kato

Article No. 20-872 Track Set - N scale

Walthers Part # 381-206521
N scale, Retail: $220.00

 
The Kato North American Style Automatic Crossing Gate brings a common signal to your Unitrack layout. Its supplied track is a standard length of 4-7/8" 124mm and the set includes two sloped street ramp pieces with painted double yellow lines, two 2-7/16" 62mm sensor tracks with sensor cables, a complete crossing gate assembly with lights, gates, speakers and track. A sticker sheet, 5V 1.2A power supply plug, power supply cable and English language instruction manual are also supplied in the crossing gate set. The North American-Style Automatic Crossing Gate can be expanded to handle crossings up to four tracks wide with the addition of the Double Track Attachment Set for Automatic Crossing Gate 381-20653 (sold separately).

KATO | N-scale (1:160) | Unitram Track System

V7 V60 UNITRAM North American Style Oval Track Set

UNITRAM Track Plates - 2 x Straight (124mm) and 8 x Curved (R180mm) UNITRAM Road Plates - 2 x Center Plate with intersection, 4 x Curved Road Plates for curves

UNITRAM Accessory kit - includes tram stop kit, catenary pole set, sidewalk details, streetlights and traffic signals, track feeders, tram rerailer, tram joiners and Dio-town plate joiners

Sticker sheet for road signs

English language instruction manual

V16 Unitrack Double Track Outer Loop Set | Kato

Article No. 20-876 Track Set - N scale

V12 Unitrack Double Track Viaduct Set | Kato

Article No. 20-871 Track Set - N scale

79-1/2 x 29-9/16" 201.9 x 75.1cm Oval, 12-3/8 Radius Curves
Walthers Part # 381-20853
N scale, KATO Unitrack
 
The Kato N Scale Unitrack M2 Basic Oval and Passing Track Set with Power Pack is a great way to start with the Unitrack system of roadbed-style track, The set includes a 79-1/2 x 29-9/16" 201.9 x 75.1cm oval complete with one each right and left hand remote-control turnouts and track for a passing siding. 12-3/8" 31.5cm radius curves allow you to use almost all available N Scale freight and passenger equipment without modifications because of curvature. 

Double-Track Set
Walthers Part # 381-20870
N scale
 
Create realistic banked curves and enjoy multiple train action. Requires two power packs (sold separately). Set makes a concrete-tie double-track layout with superelevated curves and 16-3/8 and 15" radius curves. Includes track, straight feeder track with wires and rerailer.

V14 Unitrack Double Track Inner Loop Set | Kato

Article No. 20-873 Track Set - N scale

H1 Track Expansion Set | Trix

Article No. 14311 - N scale

The track diagram of the current starter sets can be expanded with the H1 Track Extension Set. These track diagrams can be expanded continuously with the entire Minitrix track program. All of the turnouts can be retrofitted with the 14934/14935 electric mechanisms.

Walthers Part # 800-6006
All scale
 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

KATO | precision railroad models | N-scale

20-862| V3 Rail Yard Switching Track Set

The Unitrack advantage
Kato’s line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Available both as individual pieces and as track sets, let Kato UNITRACK be the first track you put down, and you may never use another track again!

H2 Track Expansion Set | Trix

Article No. 14312 - N scale

The track diagram of the current starter sets along with the H1 Track Extension Set can be expanded with the H2 Track Extension Set. These track diagrams can be expanded continuously with the entire Minitrix track program. All of the turnouts can be retrofitted with the 14934/14935 electric mechanisms.

Walthers Part # 381-23127
N scale, Retail: $112.00

 
Includes one left end section, one right end section and two center sections. 248mm each.

KATO N-scale Unitrack Starter Set 
M1 Basic Oval w/ Kato Power Pack
Walthers Part # 381-20852
(previously KATO 20-851-1 / 381-208511)

Includes:
Complete oval of track (12 3/8" radius)
Grade crossing/rerailing track
Storage Drawer for locomotives/accessories
Kato Power Pack SX

Download a PDF copy of the English Language instruction guide for M1 and M2 Track Sets (1MB): DOWNLOAD

Single-Track Viaduct Track Set
Walthers Part # 381-20861
N scale

V4 Unitrack Switching Side Set | Kato

Article No. 20-863 Track Set - N scale

Semi-circle of track with 6" curves and Two 6"-45 degree Compact turnouts. Also includes two Kato turnout control switches.

V1 Unitrack Mainline Passing Siding Set | Kato

Article No. 20-860 Track Set - N scale

Horizontal-Mount Switch Machine - 5 pack
Walthers Part # 942-502
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Vertical-Mount Switch Machine - 5 pack
Walthers Part # 942-501
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

V17 Concrete Slab Double Track Oval Set | Kato

Article No. 20-877 Track Set - N scale

V7 Double Crossover Track Set | Kato

Article No. 20-866-1 Track Set - N scale

Walthers Part # 381-20653
N scale, Retail: $78.00

For HO and N Scale Trains
Walthers Part # 381-220181

Includes:

- Controller

- Kato Standard SX Power Pack - 12V DC (for 120V) : output DC 13.5V 2.2A

310mm (12 3/16") Double Crossover Turnout

NOTE: You may want to consider the V7 set (20-866-1) as it has the additional accessories which you may need anyway.

V15 Unitrack Double Track Set for Station | Kato

Article No. 20-874 Track Set - N scale

• #4 Crossover

• 248mm (9 ¾”) total length

• Concrete ties with Synthetic Resin tie appearance in the crossing section

• #4 Crossover

• 248mm (9 ¾”) total length

• Concrete ties with Synthetic Resin tie appearance in the crossing section

N-scale Kit - 7-7/8" 20cm Deep, 10 Degree Stalls
Walthers Part # 381-23240

KATO N Gauge Unitrack
Flexible Track - 808mm (31 13/16") 10 pack
Walthers Part # 381-21000

While the UNITRACK system is versatile and adaptable to most layout needs, Kato understands that sometimes you need just a little more "wiggle" room in your layout plan designs. Whether it's for long winding straights or for curves that need to be just a little tighter or wider to fit your available space, Kato's new line of flexible track will make it easy to add these changes to your existing UNITRACK layouts!

V5 Unitrack Inner Oval Track Set for Starter Set or M1 Set | Kato

Article No. 20-864 Track Set - N scale

V6 Unitrack Outer Oval Track Set for Starter Set or M1 Set | Kato

Article No. 20-865 Track Set - N scale

Automatically change polarity of your reverse loop or reversing section.

KATO 23-048 Double Track Viaduct Incline Basic Pier Set

Complete Set of Up-And-Down Variable Height Piers. Includes 10 total (2 each of each height increment) double wide pier sections, 10 adapter pieces for mounting double track catenaries, as well as 2x sloped double track plates and a set of 10 S-Joiners.

Automatic 3 Color Signal, Straight Track 124mm | Kato

Article No. 20-605 DC Addon - N scale

Left Curved Turnout, R3/R4 | Trix

Article No. 14947 Track Accessory - N scale
MSRP 37,99 € (incl. Tax) / $41.99 USD

Minitrix Code 80 Curved Turnout Track

Right Turnout, R3/R4 with Polarized Frog | Trix

Article No. 14948 Track Accessory - N scale

Minitrix Code 80 Right Turnout

Semi-circle of track with 7" curves, 248mm (9 3/4") straight pieces, a grade crossing and a 90 degree crossing. Also includes a rerailer and feeder track.

N Unitrack Compact 150mm (6") Electric Turnout, Right

N Unitrack Compact 150mm (6") Electric Turnout, Lef

Complete oval with 6" curves and 124mm (4 7/8") straight pieces. Includes a rerailer and feeder track.

Left Turnout, 15° with Polarized Frog | Trix

Article No. 14938 Track Accessory - N scale
MSRP 34,99 € (incl. Tax) / $38.99 USD

Minitrix 15° Turnout with a Polarized Frog.

#4 Right Turnout with 481mm (19") Radius Curve

Kato's line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Available both as individual pieces and as track sets, let Kato UNITRACK be the first track you put down, and you may never use another track again!

KATO N-scale Unitrack
#4 Electric (Remote) Turnout - Unitrack -- Left Hand

Code 80 Super-Flex(R) Track | ATLAS

Article No. 150-2500 - N-Scale - 5PK

KATO 20-222 #2 Electric Wye Turnout with 481mm (19") Radius Curves

Walthers Part # 381-20222

Left Curved Turnout, R1/R2 | Trix

Article No. 14956 Track Accessory - N scale
MSRP 24,99 € (incl. Tax) / $27.99 USD

Minitrix Code 80 Curved Turnout Track

Right Curved Turnout, R1/R2 | Trix

Article No. 14957 Track Accessory - N scale

Minitrix Code 80 Curved Turnout Track

KATO 23-049 Double Track Viaduct Incline Auxilliary Pier Set

Supplementary piers, the heights of which are designed to go in-between the piers from set 23-048. Contains 10 total pieces (2 of each type) and 10 S-Joiners.

Uncoupler Track - 76.3 mm / 3" | Trix N-scale, MiniTRIX

This track allows you to uncouple locomotives and cars by remote control. The electric solenoid mechanism is activated with the Mârklin 72710 or 72720 control box.

N-scale track | Trix

Article No. 14954 
Left Turnout R4 15° 

Right Turnout, 30°/24° | Trix

Article No. 14953 Track Accessory - N scale
MSRP 22,99 € (incl. Tax) / $25.99 USD

Minitrix 30°/24° Turnout

KATO N-scale UNITRACK

#6 Right Turnout with 718mm (28 1/4") Radius Curve

#6 Electric Remote Turnout - Unitrack -- Left Hand -- 718mm (28 1/4") Radius Curve
Walthers Part # 381-20202
N scale

 

 

For Use with Smart Controller and Sound Box
Walthers Part # 381-22082
N scale, Retail: $25.00
 
This Kato Power Supply is a great for use on standard DC layouts. It has an output of 13.5V DC 2.2A making it ideal for N Scale layouts. It can also be used with the 381-22019 Smart Device Controller (in place of the supplied power supply for added power) or 381-220181 Standard SX Power Pack. 

Walthers Part # 800-6000,
A scale

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Double-Track Plate Girder Bridge -- 7-13/32" 186mm | Kato

Article No. 20-458 Track - N Scale