Accessories - DCC

Active filters

$44.80
$49.99 -10.38%
In Stock

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders.

With its energy storage (1 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound module. Subject to the energy consumption of your model it may continue to move for up to three seconds. 

$154.00
$179.99 -14.44%
Special Order / In Transit (email ishop@hobbytech.ca for availability)


What the LokProgrammer can do:

  • - Change the sound saved on the decoder.
  • - Setting of all digital parameters of the Loksound decoder such as address of the loco, operation speed, maximum speed, braking deceleration, brightness of bulbs etc; you can set all options with your computer very easily - no cumbersome entering of CVs (configuration variables) with your command station.
  • - Rearrange your sounds and transfer it to the LokSound decoder.
  • - You can use all sounds that can be downloaded to your computer hard disk.
  • - Sound can be allocated to different events.
  • - Additional sounds can be activated via function buttons.

 

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$5.26
$5.49 -4.19%
In Stock

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

$128.00
$160.00 -20%
In Stock

This WLAN receiver box is for wireless control using the MS WLAN (60667 WLAN Mobile Station) or the Infrared Controller supplied in some Starter Sets. It serves as an adapter for operation with the Digital Connector Box (60114, 60116) or a Central Station (60216, 60226, as well as 60213-60215). This unit allows you to couple the MS WLAN (60667) or the Start-Up infrared controllers with these devices to control your locomotives and other devices.

$19.99
$21.99 -9.1%
Special Order (email us for availability)

This is a 10-pin to 7-pin adapter cable for connecting a the 60653 Mobile Station, the 60652 Mobile Station, and the 66950 Trix Mobile Station to the 60125 Terminal and a 3rd Mobile Station to the 60213-60215 Central Stations.

This cable can also be used to connect a second 60652 Mobile Station to the 24088 feeder track or to the 60115 Connector Box (H0) or 60111 Connector Box (Märklin 1).

$279.99
$340.00 -17.65%
out of stock / available to order (subject to availability)

This is for servicing and presenting locomotives with up to 8 driving axles and coupled axles. This roller test stand is suitable for the "Big Boy". Eight adjustable pairs of roller brackets with precision ball bearings are included. The aluminum parts of the roller brackets are black anodized. The construction and technical features are the same as the 78150 roller test stand.

The test stand has train power connections for a conventional transformer or a Digital system. The roller test stand has a removable center conductor in the roller area. The running rails can be connected separately to a power pack, thus making this test stand suitable for two-rail locomotives.

Dimensions 520 x 42 x 30 mm / 20-1/2" x 1-5/8" x 1-3/16"

$13.40
$14.49 -7.52%
In Stock

The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to hard-wire the decoder. The board is extremely small with dimensions of only 13.0 mm x 9.0 mm. The mounting tabs can also be broken away for tighter fit applications. Functions AUX3 and AUX4, logic outputs, are both amplified (each about 180mA). In total, up to 6 outputs can be used.

Soldered connection cables with a length of approx. 20 cm.

Dimensions: Length 13.0 mm x 9.0 mm (With mounting tongue: 18.0 mm x 9.0 mm).

$15.60
$16.99 -8.18%
In Stock

The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if you do not intend to wire the decoder freely or if you wish to use more than four function outputs on your LokPilot or LokSound decoder. This adapter board simulates the typcial size and shape of Märklin® 6090x-decoders and can be installed in every suitable position.