Decoders - locomotive and cars

Active filters

$31.25
$34.90 -10.46%
In Stock

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

$21.35
$23.99 -11%
In Stock

While our LokPilot V4.0 decoder without doubt meets the most extravagant requirements even of the most sophisticated experts, many modelers are looking for a robust, high quality DCC decoder for their standard requirements, which should also be easily affordable. You may stop searching right now: our new LokPilot Standard has been developed from scratch with the objective to provide an up-to-date decoder that meets most of the required functionality on the one hand while going easy on your wallet.

$21.35
$23.99 -11%
In Stock

While our LokPilot V4.0 decoder without doubt meets the most extravagant requirements even of the most sophisticated experts, many modelers are looking for a robust, high quality DCC decoder for their standard requirements, which should also be easily affordable. You may stop searching right now: our new LokPilot Standard has been developed from scratch with the objective to provide an up-to-date decoder that meets most of the required functionality on the one hand while going easy on your wallet.

$29.99
$32.99 -9.09%
In Stock

Affordable, robust, high quality DCC decoder for standard requirements.

The LokPilot Standard decoder generates 0.9A continuous current and easily handles all commonly available DC motors as well as coreless motors. The LokPilot Standard can also be used on analogue DC layouts. The LokPilot Standard decoder has four function outputs

$152.00
$179.99 -15.55%
In Stock

The LokSound L V4.0 and LokSound L Select decoders are made to fill a huge void in the O scale DCC market. For years now many have been using a large scale non sound decoder for the motor and wasting an HO Scale DCC and Sound decoder to operate the sound as no High Amperage, High Quality sound decoder has been available that will fit comfortably into an O scale locomotive. The wait is finally over! The LokSound L V4.0 and LokSound L Select decoders will easily use the many respective ESU V4.0 and Select sound files already on the market as they are of course programmable with the famous ESU LokProgrammer hardware.

$112.50
$129.99 -13.45%
in stock

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. LokSound V4.0 decoders can be used on DC as well as on AC layouts. Constant current of 1.1A continuous current are more than enough power for even for long trains. You can also expect excellent motor control with technology that makes it possible to drive your loco very slow on the tracks.

ESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0 ESU is extending the sound library all the time and provides all sounds on our homepage for free download.

$25.50
$32.99 -22.7%
In Stock

"Better is the enemy of good" it is said in colloquial language for generations. We fully agree with this proverb and are proud to present to you the brand-new LokPilot V4.0 DCC Decoder. This decoder supersedes from now on the "well and good" LokPilot V3.0 DCC Decoder, which has achieved an excellent reputation among model railroaders all around the world. The new LokPilot V4.0 DCC is much "better" in many respects based on the LokPilot family’s high standard performance.

$25.50
$32.99 -22.7%
In Stock

The LokPilot V4.0 DCC supports the world-wide standarised DCC protocol and can be used in combination with all DCC systems on the market. It can also be used for DC operation and recognises operational modes automatically „on-the-fly". As a matter of course there are up to 9999 addresses in DCC operation. The LokPilot V4.0 DCC decoder has 4 function outputs which achieve 250 mA load each and the 21MTC connector version has two logical outputs which can be made alive via the adapter board 51968.

$25.50
$32.99 -22.7%
temporarily out of stock / email us for availability

"Better is the enemy of good" it is said in colloquial language for generations. We fully agree with this proverb and are proud to present to you the brand-new LokPilot V4.0 DCC Decoder. This decoder supersedes from now on the "well and good" LokPilot V3.0 DCC Decoder, which has achieved an excellent reputation among model railroaders all around the world. The new LokPilot V4.0 DCC is much "better" in many respects based on the LokPilot family’s high standard performance.

$30.50
$39.90 -23.56%
temporarily out of stock / email us for availability

The LokPilot micro V4.0 DCC is a genuine power house. It drives the loco motor with a continuous load capability of 0.75A and has significantly shrunk compared to its forerunner: the smallest member of the LokPilot V4.0 family has now a size of only 10.5mm x 8.1mm x 2.8mm and should thus fit in the smallest N-/TT-gauge locos.

$99.99
$132.99 -24.81%
In Stock

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. LokSound V4.0 decoders can be used on DC as well as on AC layouts. Constant current of 1.1A continuous current are more than enough power for even for long trains. You can also expect excellent motor control with technology that makes it possible to drive your loco very slow on the tracks.

ESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0 ESU is extending the sound library all the time and provides all sounds on our homepage for free download.

$104.99
$139.99 -25%
In Stock

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. LokSound V4.0 decoders can be used on DC as well as on AC layouts. Constant current of 1.1A continuous current are more than enough power for even for long trains. You can also expect excellent motor control with technology that makes it possible to drive your loco very slow on the tracks.

ESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0 ESU is extending the sound library all the time and provides all sounds on our homepage for free download.

$104.99
$139.99 -25%
In Stock

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. LokSound V4.0 decoders can be used on DC as well as on AC layouts. Constant current of 1.1A continuous current are more than enough power for even for long trains. You can also expect excellent motor control with technology that makes it possible to drive your loco very slow on the tracks.

ESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0 ESU is extending the sound library all the time and provides all sounds on our homepage for free download.

$99.99
$132.99 -24.81%
In Stock

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. LokSound V4.0 decoders can be used on DC as well as on AC layouts. Constant current of 1.1A continuous current are more than enough power for even for long trains. You can also expect excellent motor control with technology that makes it possible to drive your loco very slow on the tracks.

ESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0 ESU is extending the sound library all the time and provides all sounds on our homepage for free download.

$168.75
$199.99 -15.62%
temporarily out of stock / email us for availability

LokSound 5 L is intended for use in all applications where the required power exceeds the limits of LokSound 5. Ideally these are 0 gauge vehicles and also smaller 1 gauge locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm it is equipped with a dual speaker output and integral PowerPack.

The LokSound 5L is equipped with a multi-pin connector and is supplied ex works with an adapter board featuring solder pads.

$152.00
$179.99 -15.55%
temporarily out of stock / email us for availability

The LokSound 5 L DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

It is intended for use in all applications where the required power exceeds the limits of LokSound 5. Ideally these are 0 gauge vehicles and also smaller 1 gauge locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm it is equipped with a dual speaker output and integral PowerPack.

The LokSound 5L DCC is equipped with a multi-pin connector and is supplied ex works with an adapter board featuring solder pads.

$112.50
$129.99 -13.45%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$112.50
$129.99 -13.45%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$112.50
$129.99 -13.45%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$112.50
$129.99 -13.45%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$112.50
$129.99 -13.45%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$116.09
$134.99 -14%
In Stock

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$128.50
$149.99 -14.33%
in stock

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$128.50
$149.99 -14.33%
There are not enough products in stock

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$128.50
$149.99 -14.33%
temporarily out of stock / email us for availability

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$128.50
$149.99 -14.33%
temporarily out of stock / email us for availability

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$99.99
$114.99 -13.04%
In Stock

The LokSound 5 micro is actually a „small miracle“: With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types.

$99.99
$114.99 -13.04%
In Stock

The LokSound 5 micro is actually a "small miracle": With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.

$99.99
$114.99 -13.04%
temporarily out of stock / email us for availability

The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.

The LokSound 5 micro is actually a "small miracle": With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types.