TRIX C-track HO

TRIX C-track (Code 83) is easy to set up, mechanically sturdy, and able to take rough treatment. On the other side, it is realistically detailed for advanced model railroaders, reliable and foolproof. The track geometry and extensive selection of turn-outs, curves and lengths allow you to build the most complexed lay-outs modelling the real world. Nevertheless, the real asset of this track is the play value. You can click-it together and take it apart as many times as you like. This is perfect for children or the experienced modeler that desire to improve and expand the lay-out. The C-track use a very strong connector mechanism under the roadbed which also includes the power connection. This system is far more reliable and provides better power conductivity than rail-joiners (which also are not used in the real world). The C-track is with its features smoother and more realistic, but you can transition to or from other track including flex track with the Adapter Track found in the TRIX C-track assortment.

Active filters

$17.40
There are not enough products in stock

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

$24.00
In Stock

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

$188.88
$210.00 -10.06%
In Stock

This set is the ideal way to start out in Digital Control (DCC and mfx). It includes a Trix Mobile Station control system which is easy to use in both DCC and mfx. If you are using locomotives with mfx protocol the controller will automatically recognize and load the profile of the locomotive (Name, Class, Icon, Address, Function buttons and more). All you need to do is place the locomotive on the track. In DCC mode you have full control of the CVs and can build and store your own locomotive profile. Up to 40 profiles can be stored for direct access.

This set can be expanded with the Trix C Track extension sets and with the entire Trix C Track program

Code 83: The rail profile is 2.1 mm / 0.083" high

$73.59
$89.99 -18.22%
In Stock

Length 188.3 mm / 7-3/8", crossing angle = 24.3° curve, radius 437.5 mm / 17-1/4" (R2).
Code 83: The rail profile is 2.1 mm / 0.083" high

The double slip switch comes with a manual hand lever, an electric mechanism and a lighted turnout lantern. A turnout decoder can be retrofitted. The double slip switch can be used for left or right installation. The setting for the branch or straight is well-defined. Built-in electric turnout motor and lantern.

$35.40
$42.99 -17.66%
In Stock

Length 236.1 mm / 9-5/16".
Branch track radius 1,114.6 mm / 43-7/8".
Turnout curve 12.1°.
10° metal frog, can be polarized.

Two (2) no. 62071 track sections are required at the end of the turnout. A roadbed piece to fit is included. A hand lever is included.

The 62912 curved track (radius 1,114.6 mm, 12.1°) is required to offset and parallel the branch track.

The 62229 straight track (229.3 mm) is required to offset the length of 62912 on the main track.

$35.40
$42.99 -17.66%
In Stock

Length 236.1 mm / 9-5/16".
Branch track radius 1,114.6 mm / 43-7/8".
Turnout curve 12.1°.
10° metal frog, can be polarized.

Two (2) no. 62071 track sections are required at the end of the turnout. A roadbed piece to fit is included. A hand lever is included.

The 62912 curved track (radius 1,114.6 mm, 12.1°) is required to offset and parallel the branch track.

The 62229 straight track (229.3 mm) is required to offset the length of 62912 on the main track.

$43.76
$59.99 -27.05%
In Stock

Trix H0 Code 83 - Article No. 62771
Left Wide Radius Curved Turnout

A long-standing wish of Trix fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Trix is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions

Inner curve: R3 = 515 mm / 20-1/4" / 30°.
Outer curve: 30° with a parallel curve spacing of 64 mm / 2-1/16".

Hand lever included.
Two (2) each 62315 track are required on the inner and outer curve of the turnout. A roadbed piece to fit here is included with the 62315.
The frog is metal and can be polarized.
The 74491 electric turnout mechanism, the 74462 digital decoder, and the 74470 turnout lanterns can be installed on this turnout.

$43.76
$59.99 -27.05%
In Stock

Trix H0 Code 83 - Article No. 62772
Right Wide Radius Curved Turnout

A long-standing wish of Trix fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Trix is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions

Inner curve: R3 = 515 mm / 20-1/4" / 30°.
Outer curve: 30° with a parallel curve spacing of 64 mm / 2-1/16".

Hand lever included.
Two (2) each 62315 track are required on the inner and outer curve of the turnout. A roadbed piece to fit here is included with the 62315.
The frog is metal and can be polarized.
The 74491 electric turnout mechanism, the 74462 digital decoder, and the 74470 turnout lanterns can be installed on this turnout.

$95.99
$119.00 -19.33%
There are not enough products in stock

TRIX H0 Code 83 - Article No. 62900

C Track - Large Track Extension Set

This track extension set can be used to expand the track layout for all starter sets. It can be used for parallel track connections, passing sidings, a storage siding, and new routes. This track extension set is suitable for TRIX starter sets as well as for existing layouts. It can be expanded with the entire C Track program.

$67.99
$79.99 -15%
There are not enough products in stock

TRIX H0 Code 83 - Article No. 62903

C Track - C3 Extension Set - passing siding with curved turnouts

For expanding the basic oval C Track starter set or any lay-out in need to include a passing siding utilizing curved turnouts to optimize available real-estate.

You may further expand your lay-out utilizing suitable pieces from the TRIX C-track assortment

$6.08
$7.49 -18.83%
In Stock

Trix H0 C-track - Article No. 62912
Curved Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 1114.6 mm / 43-7/8". Curve 12.1°

Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.

This curve is used to offset the curve on the 62711 and 62712 Wide Radius Turnouts so that the branch will parallel with the main line. The 62071 is also required as a wedge piece between the turnout and the 62912.

$14.00
$16.98 -17.55%
In Stock

Trix H0 C-track - Article No. 62922
Straight Track - Adapter Track from Fleishmann Profi Track (Code 100)
Code 83: The rail profile is 2.1 mm / 0.083" high (TRIX C-Track)

Length 180 mm / 7-7/8"

This track enables the transition from the FLEISCHMANN* Profi Track System to the Trix C Track: Code 100 to TRIX C-track Code 83

*FLEISCHMANN is a brand of Modelleisenbahn München, Inc.

$29.52
$39.99 -26.18%
In Stock

Trix H0 C-track - Article No. 62997
Straight Track - Uncoupler Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 94.2 mm / 3-3/4"

The uncoupler track comes with a manual hand lever and a built-in electric mechanism. It is compatible with most common European coupler systems. It can be used with all NEM couplers and with current close coupler systems. A light mast can be plugged into the uncoupler track as an uncoupler signal (Märklin 74997). The uncoupler track can be connected to a control box or to a digital decoder

$463.99
$579.00 -19.86%
In Stock

TRIX H0 Code 83 - Article No. 66861

C Track - Turntable

This is a DB standard design 23 meter / 74 foot 9 inch turntable. It is designed for conventional and digital locomotive operation. The remote controlled deck has a built-in motor. It can only be controlled digitally with the Mobile Station 2 and Central-Station 2 and 3 (not included). Control with the Central-Station 2 and 3 is especially easy by means of track indexing (after carrying out an update), or with different digital central controllers that use the DCC digital format.