Walthers Part # 800-6000,
A scale

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Walthers Part # 800-6006
All scale
 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Walthers Part # 800-6012
A scale, Retail: $250.00

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Non-Insulated pkg(8)
Walthers Part # 800-9602
A scale, Retail: $2.95

 
Female .110" solderless connectors for all Circuitron printed circuit boards.

For Use with Smart Controller and Sound Box
Walthers Part # 381-22082
N scale
 
This Kato Power Supply is a great for use on standard DC layouts. It has an output of 13.5V DC 2.2A making it ideal for N Scale layouts. It can also be used with the 381-22019 Smart Device Controller (in place of the supplied power supply for added power) or 381-220181 Standard SX Power Pack. 

Automatically change polarity of your reverse loop or reversing section.

TRIX | N-scale (1:160) | Track - accessories

Track Screws

Precision steel screws 1.2 mm / 3/64“ with turned threads for wood (7 mm / 9/32“ long).

150 pieces/package.

TRIX | N-scale (1:160) | Track - accessories | structure

Turntable with 8 Spoke Track, Code 80 track

This is a standard design turntable with a 21 meter / 68 foot 3 inch deck length.

Download the MANUAL

TRIX | N-scale (1:160) | Track - accessories | structure

Turntable extension set, Code 80 track

This set consists of 8 track connection edge segments for attaching to the edge of the turntable. The turntable can be expanded to 24 track connections with 2 expansion sets. The color scheme goes with the 66570 turntable.

Walthers Cornerstone (N scale 1:160)

Motorized 130' Turntable -- Assembled - 10-3/8" 26.3cm Overall Diameter

Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility.

Vertical-Mount Switch Machine
Walthers Part # 942-101
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Horizontal-Mount Switch Machine
Walthers Part # 942-102
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Walthers Layout Control System

Distribution Block
Walthers Part # 942-111

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Download the Instruction Sheet (94 K bytes, PDF format)

Connecting Cable pkg(5) Socket - Socket

WALTHERS Part # 942-112

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System

Extension Cable, Plug - Socket, Length: 48" 122cm pkg(5)
Walthers Part # 942-113

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.

Walthers Layout Control System | all scales

Dual LED Fascia Turnout Controller (yellow-green)

Walthers Part # 942-121

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Dual-Color LED Fascia Crossover Controller - Yellow - Green

Walthers Part # 942-122
A scale

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Walthers Layout Control System | all scales

Dual Color LED Accessory Fascia Controller (yellow-green)

Walthers Part # 942-123

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System

Turnout Drill Set
Walthers Part # 942-140

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Download the Instruction Sheet (94 K bytes, PDF format)

Edge Connector for Tortoise(R) Switch Machine pkg(2)
Walthers Part # 942-142
A scale

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 
 

Walthers Layout Control System | all scales

Edge Connector for Tortoise® Switch Machine w/Green PC Board pkg(2)

Walthers Part # 942-123

PLEASE NOTE - this Edge Connector is designed for use with Tortoise™ switch machines manufactured after May/June 2020 that feature a green 1-3/8" (35mm) wide PC board.

Two-Color LED Fascia Indicator (Yellow-Green)

Walthers Part # 942-151
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Red - Green
Walthers Part # 942-152
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - Green

Walthers Part # 942-154

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - Yellow

Walthers Part # 942-155

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - Red

Walthers Part # 942-156

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - White

Walthers Part # 942-157

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Stall Motor Driver
Walthers Part # 942-161
A scale, Retail: $19.98
Download the Instruction Sheet (100 K bytes, PDF format)

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machines). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Vertical-Mount Switch Machine - 5 pack
Walthers Part # 942-501
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Horizontal-Mount Switch Machine - 5 pack
Walthers Part # 942-502
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Track-Bed™ Roll - N Scale

Track-Bed Roll offers a smooth application. It deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle.

Aligns well with cork or Homasote®* applications. Also works great for H0n3 and Hon30 gauge.

Track-Bed™ Track-Bed™ Roadbed Material - N Scale - 12 x 24 x 1/8" 5.1 x 9.4 x .3cm