Walthers Part # 800-6000,
A scale

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Walthers Part # 800-6006
All scale
 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Walthers Part # 800-6012
A scale, Retail: $250.00

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Non-Insulated pkg(8)
Walthers Part # 800-9602
A scale, Retail: $2.95

 
Female .110" solderless connectors for all Circuitron printed circuit boards.

Automatically change polarity of your reverse loop or reversing section.

WalthersContols® | HO-scale | Track Accessories

Manual Uncoupler: Perfect for yards, sidings or main lines. Magnet rotates to avoid accidental uncoupling. Complete instructions, drilling jig, trackside marker and control knob all included. Easily installed in new or existing Code 83 or 100 track. Works with most magnetic knuckle couplers

Tools Needed (sold separately): 5/32" 3.9mm Drill Bit 1/16" 1.5mm Drill Bit

2-Amp, 12-Volt Filtered DC Power Supply
Walthers Part # 942-110
A scale

WALTHERS Cornerstone® | HO scale | accessories
Walthers Part # 933-1050

Animate your models in minutes with the Walthers Cornerstone Motorizing Kit. This fully assembled drive unit is a drop-in mount for Walthers Double Track Swing Bridge (933-3088), 90' Turntable Kit (933-3171) and the Walking Beam Oil Pumps in HO (933-3170) or N Scale (933-3248), all sold separately. The Motorizing Kit can easily be adapted to other models. It's complete with a rugged DC motor and has 360:1 gearing to insure smooth, slow speeds.

PLEASE NOTE: This unit is for use with DC power only; maximum 12V, .25 amps

Vertical-Mount Switch Machine
Walthers Part # 942-101
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Horizontal-Mount Switch Machine
Walthers Part # 942-102
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Walthers Layout Control System

Distribution Block
Walthers Part # 942-111

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Download the Instruction Sheet (94 K bytes, PDF format)

Connecting Cable pkg(5) Socket - Socket

WALTHERS Part # 942-112

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System

Extension Cable, Plug - Socket, Length: 48" 122cm pkg(5)
Walthers Part # 942-113

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.

Walthers Layout Control System | all scales

Dual LED Fascia Turnout Controller (yellow-green)

Walthers Part # 942-121

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Dual-Color LED Fascia Crossover Controller - Yellow - Green

Walthers Part # 942-122
A scale

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Walthers Layout Control System | all scales

Dual Color LED Accessory Fascia Controller (yellow-green)

Walthers Part # 942-123

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System

Turnout Drill Set
Walthers Part # 942-140

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Download the Instruction Sheet (94 K bytes, PDF format)

Edge Connector for Tortoise(R) Switch Machine pkg(2)
Walthers Part # 942-142
A scale

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 
 

Walthers Layout Control System | all scales

Edge Connector for Tortoise® Switch Machine w/Green PC Board pkg(2)

Walthers Part # 942-123

PLEASE NOTE - this Edge Connector is designed for use with Tortoise™ switch machines manufactured after May/June 2020 that feature a green 1-3/8" (35mm) wide PC board.

Two-Color LED Fascia Indicator (Yellow-Green)

Walthers Part # 942-151
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Red - Green
Walthers Part # 942-152
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - Green

Walthers Part # 942-154

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - Yellow

Walthers Part # 942-155

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - Red

Walthers Part # 942-156

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - White

Walthers Part # 942-157

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Stall Motor Driver
Walthers Part # 942-161
A scale, Retail: $19.98
Download the Instruction Sheet (100 K bytes, PDF format)

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machines). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Vertical-Mount Switch Machine - 5 pack
Walthers Part # 942-501
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Horizontal-Mount Switch Machine - 5 pack
Walthers Part # 942-502
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Walthers SceneMaster | HO scale (1:87) 

Post-1960s Cantilever Grade Crossing Signal

SceneMaster featuring:

• Long-lasting LEDs
• Adds animation and realism to model street scenes
• Modern American cantilever-style signals as used in many communities
• Correct scale dimensions
• Install in minutes in new or existing scenery
• Fully assembled, ready to use
• Color-coded hook up wires
• Operate with Crossing Signal Controller (949-4359, sold separately)

Walthers SceneMaster | HO scale (1:87) 

Grade Crossing Signal Controller

Protect motorists along your HO Scale railroad with the SceneMaster Grade Crossing Signal Controller. Designed to provide a realistic flashing rate with all SceneMaster Crossing Signals (each sold separately) the unit comes fully assembled and ready to use on DC-powered layouts*.

Additonal features include:

• Controls up to 4 signals
• Includes 4 optical sensors
• Fully assembled control unit ready to use on DC layouts
• Simple plug-in wiring connections
• Operates on 18 volt AC from power pack accessory terminals
• Complete installation and hook up instructions included

Walthers SceneMaster | HO scale (1:87) 

Traffic Light Controller

• Realistic red-yellow-green sequence
• Operates up to four standard or two, Four-Way Hanging signals (#949-4363, each sold separately)
• Operates all SceneMaster working traffic lights
• Fully assembled, ready to use
• Simple plug-in wiring connections
• Operates on 18 volt AC from power pack accessory terminals
• Complete installation & hook up instructions