G-scale track

PIKO G-Scale Track Features

  • Only pure 100% Virgin Brass Rail - our brass is mined, refined and drawn into rail - never using scrap metal.
    • Our Virgin Brass rail is a better electrical conductor, is easer to clean, and stays clean longer than rail made from recycled metal.   Our pure brass develops a realistic-looking patina outdoors.  (Some other brands stay an ugly yellow color and even develop surface rust from the scrap iron, scrap aluminum and many other impurities.)
    • Code 332 (0.332” high) solid rail.  The heavy-duty profile is strong and carries current with minimal voltage loss.  (Some other brands hollow out the bottom of the rail or are even made of sheet metal, not solid brass.)

PIKO rail clamps - 2 styles

  • Ties made of ultraviolet-stabilized HDPE (high-density polyethylene) to withstand decades of use outdoors.
  • Unique track geometry makes complex track plans simple to build with only a few different track sections.
  • Compatible with most other brands of G-Scale track for unlimited expansion possibilities.
  • Sturdy push-together rail joiners are factory-formed to fit tightly to the rail profile.
  • Made in our own factory in Germany, for the quality you deserve.
  • Don't ever let anyone tell you that track is all the same.  There IS a difference!

For best results outdoors, use PIKO RailClamps:  (Pictured)

  • PIKO RailClamps in two styles, to go either directly on the rail (On-Rail) or over the existing rail joiners (Over-Joiner), for a long-lasting mechanical and electrical connection on garden railway layouts.

Active filters

$53.32
$59.99 -11.12%
In Stock

35220 R1 Manual Switch Left 30° Track (G-Scale)

  • R1 Curve: Radius = 600mm / 23.6"
    • Diameter = 1200mm / 47.2"
  • Each 35220 switch is 30°
  • Each 35220 fits in the place of one G320 (320mm) Straight Track
  • Built-In light spring mechanism holds rails where they are set, but allows trains to pass through against the points rails without derailing.  No separate machine or manual switch throw needed.  
  • Hidden jumper wires to ensure reliable long term electrical contact.
  • Easily convert any PIKO switch to remote operation by adding a PIKO 35271 switch machine and a switch controller
  • 100% Virgin Brass Rail
  • Code 332 (0.332” high) solid rail.
$83.69
$95.99 -12.81%
In Stock

35223 R5 Manual Switch Right 22.5° Track (G-Scale)

  • R5 Curve: Radius = 1240mm / 48.8"
    • Diameter = 2480mm / 97.6"
  • Each 35223 switch is 22.5° plus a PIKO #35216 (7.5° R5 Curve)
  • Each 35223 fits in the space of one G320 + G160 (320mm + 160mm) Straight Track
  • Built-In light spring mechanism holds rails where they are set, but allows trains to pass through against the points rails without derailing.  No separate machine or manual switch throw needed.  
  • Hidden jumper wires to ensure reliable long term electrical contact.
  • Easily convert any PIKO switch to remote operation by adding a PIKO 35271 switch machine and a switch controller
  • 100% Virgin Brass Rail
  • Code 332 (0.332” high) solid rail.
$4.00
$4.19 -4.53%
In Stock

Tie Strips are used in the construction of flexible track.  Using a rail bender and PIKO P3000 or P1500 rails and SB320 or SB280 Tie Strips your layout will have unlimited possibilities.

  • Fits to a 320mm length or track = 320mm / 12.6"
  • Can be combined with SB280 Tie Strip to create one 600mm, or use in any combination
  • Ties are made of ultraviolet-stabilized HDPE
  • Compatible with most other brands of G-Scale track for unlimited expansion possibilities.
  • Made in our own factory in Germany.

$3.60
$3.79 -5.01%
In Stock

Tie Strips are used in the construction of flexible track.  Using a rail bender and PIKO P3000 or P1500 rails and SB320 or SB280 Tie Strips your layout will have unlimited possibilities.

  • Fits to a 280mm length or track = 280mm / 11"
  • Can be combined with SB320 Tie Strip to create one 600mm, or use in any combination
  • Ties are made of ultraviolet-stabilized HDPE
  • Compatible with most other brands of G-Scale track for unlimited expansion possibilities.
  • Made in our own factory in Germany.

$117.59
$129.99 -9.54%
In Stock

Our new powered rerailer makes it easy to put any locomotive on the track. With large multi-wheeled locos, it can be a real challenge to get all the wheels correctly on the rails. And while a garden railway can be great fun, bending down in the rocks and dirt to put trains on the tracks is not fun. That struggle is now a thing of the past! Set the rerailer down on a powered track and the built-in contacts automatically pick up power from the rails. Just place a loco down on the rerailer - no need to fuss with accurately aligning wheels - and it rolls down onto the track under its own power. The new PIKO powered rerailer features a short version for smaller locos, plus a snap-on extension for those really long locos. And it works just as well for freight and passenger cars of any size.