DCC and Accessories

HobbyTech has an extensive stock of digital controllers, decoders and accessories including power supplies, wires, adapter boards, conversion kits. Our primary brands are ESU, Marklin, PIKO but also stock other lines. 

Active filters

$657.77
$899.99 -26.91%
In Stock

The ECoS 50210 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.

The ECoS has - like most of the recent central stations - a large coloured display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the coloured screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured.

$797.77
$880.00 -9.34%
special order / email ishop@hobbytech.ca for availability

As a multi-protocol controller, the Central Station 3 plus with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories. The Central Station Plus has a built-in s88 connection

NOTE: The power supply is not included. You may need to get the 60045 switched mode power pack.

$659.25
$710.00 -7.15%
Special Order (email us at ishop@hobbytech.ca)

As a multi-protocol controller, the Central Station 3 with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories.

NOTE: The power supply is not included. You may need to get the 60045 switched mode power pack.

$419.99
$532.99 -21.2%
In Stock

Wireless Operating Enjoyment
The MS WLAN feature an interactive display and a newly designed control knob

This complete 4-pack set consist off:
- 60667 Mobile Station WLAN
- 60116 Digital Connector Box
- 60117 WLAN Receiver Box
- 66367 Switched Mode Power Pack, 120 Volts

Operate your layout wirelessly with one hand by using the Mobile Station WLAN!

NOTE: All components can be bought separately.

$399.99
$499.99 -20%
In Stock

The new ESU CabControl is a complete DCC system which allow you wireless control of your locomotives, accessories and routes. This system use a handheld with Android operating technology interfaced to your lay-out through wireless LAN. Power supply and a smart technology connector box is all included so you can operate your trains as soon as you hook it up to your layout (assuming that you already have DCC or DCC/sound equipped locomotives).

$279.99
$340.00 -17.65%
out of stock / available to order (subject to availability)

This is for servicing and presenting locomotives with up to 8 driving axles and coupled axles. This roller test stand is suitable for the "Big Boy". Eight adjustable pairs of roller brackets with precision ball bearings are included. The aluminum parts of the roller brackets are black anodized. The construction and technical features are the same as the 78150 roller test stand.

The test stand has train power connections for a conventional transformer or a Digital system. The roller test stand has a removable center conductor in the roller area. The running rails can be connected separately to a power pack, thus making this test stand suitable for two-rail locomotives.

Dimensions 520 x 42 x 30 mm / 20-1/2" x 1-5/8" x 1-3/16"

$288.80
$339.99 -15.06%
There are not enough products in stock

Mobile Control II Remote Control single Handset for ECoS, german / english. With lanyard and USB-cable

The Mobile Control II applies the WLAN standard for communicating with the ECoS. The Mobile Control II can control all locomotives registered in the ECoS. All important locomotive properties such as name, symbol, function mapping as well as symbols for function buttons will be taken from the ECoS and will be displayed correctly. All accessories and routes displayed on the control panel of the ECoS can be switched. Of course the differentiation between double, treble and quadruple aspects will remain fully intact and displayed with the correct symbol on the display.

 

$219.99
$259.99 -15.39%
There are not enough products in stock

PIKO | Digital Command Control system | HO, TT, N scale

PIKO SmartControl WLAN (wireless DCC controller)
The ideal, low-priced entry into the digital world of model railways! Run several locomotives at the same time. The PIKO SmartControl WLAN has a max. output current of 2 A. If the layout grows, it is possible to add suitable boosters. PIKO SmartControlWLAN has full DCC compatibility.

The all-new PIKO SmartControlWLAN Digital Command Control system, an innovative, user-friendly, and above all sustainable DCC system developed completely in-house for the needs of the average DC model railroader 

$188.88
$210.00 -10.06%
In Stock

This set is the ideal way to start out in Digital Control (DCC and mfx). It includes a Trix Mobile Station control system which is easy to use in both DCC and mfx. If you are using locomotives with mfx protocol the controller will automatically recognize and load the profile of the locomotive (Name, Class, Icon, Address, Function buttons and more). All you need to do is place the locomotive on the track. In DCC mode you have full control of the CVs and can build and store your own locomotive profile. Up to 40 profiles can be stored for direct access.

This set can be expanded with the Trix C Track extension sets and with the entire Trix C Track program

Code 83: The rail profile is 2.1 mm / 0.083" high

$155.55
$209.99 -25.93%
In Stock

Top features of PIKO SmartControl Light…

  • SmartControl Light is an affordable and easy-to-use digital system
  • Fully NMRA-DCC compatible.  Works with all brands of DCC decoders.
  • Maximum output of 2 Amps.
  • Operation is and easy and intuitive.
  • Control and store up to 9,999 locomotives with up to 24 functions per loco
  • One built-in reversing loop output.
  • Control up to 20 locos at a time!

$154.00
$179.99 -14.44%
Special Order / In Transit (email ishop@hobbytech.ca for availability)


What the LokProgrammer can do:

  • - Change the sound saved on the decoder.
  • - Setting of all digital parameters of the Loksound decoder such as address of the loco, operation speed, maximum speed, braking deceleration, brightness of bulbs etc; you can set all options with your computer very easily - no cumbersome entering of CVs (configuration variables) with your command station.
  • - Rearrange your sounds and transfer it to the LokSound decoder.
  • - You can use all sounds that can be downloaded to your computer hard disk.
  • - Sound can be allocated to different events.
  • - Additional sounds can be activated via function buttons.

 

$120.60
$139.99 -13.85%
in stock

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$128.00
$160.00 -20%
In Stock

This WLAN receiver box is for wireless control using the MS WLAN (60667 WLAN Mobile Station) or the Infrared Controller supplied in some Starter Sets. It serves as an adapter for operation with the Digital Connector Box (60114, 60116) or a Central Station (60216, 60226, as well as 60213-60215). This unit allows you to couple the MS WLAN (60667) or the Start-Up infrared controllers with these devices to control your locomotives and other devices.

$133.30
$154.99 -13.99%
In Stock

The NEW LokSound 5 DCC Direct, with integrated PowerPack, can easily replace boards that provide poor motor control, low volume, or generally inferior sound. Not only will the decoder work fine with most factory installed speakers, but it will sound even better with our new 11x15mm “sugar cube” speaker and sound enclosure kits (seold seperately). Worried about dead spots or pesky yard ladder switches? With the unique design and engineering there’s no need as we’ve built in the ESU PowerPack direct into the decoder!

$120.60
$139.99 -13.85%
In Stock

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$120.60
$139.99 -13.85%
In Stock

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder we've ever built. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15mm "sugar cube" speaker and sound capsule kit is always included.

$116.40
$134.99 -13.77%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$88.88
$132.99 -33.17%
In Stock

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. LokSound V4.0 decoders can be used on DC as well as on AC layouts. Constant current of 1.1A continuous current are more than enough power for even for long trains. You can also expect excellent motor control with technology that makes it possible to drive your loco very slow on the tracks.

ESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0 ESU is extending the sound library all the time and provides all sounds on our homepage for free download.

$132.95
There are not enough products in stock

The TSU-1100 is one of our smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!

$102.00
$130.00 -21.54%
In Stock

This is a Multi Protocol digital hand control unit for both DCC and mfx locomotives and accessories. 40 locomotives can be controlled with direct access*. Up to 32 locomotive functions and 320 solenoid items can be controlled

NOTE: The 66955 is the controller (only). You will also need the track connector box (60116) and a power adapter (66367)

$116.40
$134.99 -13.77%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$116.40
$134.99 -13.77%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$116.40
$134.99 -13.77%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$117.77
$137.99 -14.65%
Special Order (email us at ishop@hobbytech.ca)

The 55016 PIKO SmartController Light includes the SmartController Light remote and cable.  The central station is NOT included in the purchase of this SmartController Light.  The digital central station for HO-, N-, and TT-Scales is offered in the 55017 SmartControl Light Basic Set.

The 55016 SmartController is an add-on remote, exactly the same as the SmartController Light in the 55017 Basic Set, so additional users can all enjoy SmartControl Light together.  

$116.40
$134.99 -13.77%
In Stock

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

$108.80
$124.99 -12.95%
In Stock

ESU has succeeded in developing an even smaller LokSound decoder. The LokSound 5 Nano DCC with only 19.6 mm x 8.5 mm x 3.2 mm is the smallest LokSound decoder ever built. Thus, it could be used in vehicles with minimal space available like N and TT.

The LokSound 5 Nano DCC decoder is a pure DCC decoder with open cable ends for free wiring or an E24-interface. The LokSound 5 Nano DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

Please note the LokSound 5 Nano DCC decoder does not come with a speaker

$108.80
$124.99 -12.95%
In Stock

The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.

The LokSound 5 micro DCC Direct with its dimensions of 66.0mm x 8.2mm is a pure DCC decoder and comes without a loudspeaker.

$108.80
$124.99 -12.95%
In Stock

The LokSound 5 micro DCC Direct Kato Japan has been specially developed for installation in Kato-branded track N vehicles: in many European and Japanese locomotives of this manufacturer, the ser decoder can be installed directly below the engine instead of the analog board installed as standard. Finally, these models can also be easily retrofitted with a LokSound decoder.

The LokSound 5 micro DCC Direct Kato Japan with its dimensions of 27.6mm x 14.1mm x 3mm is a pure DCC decoder and comes without a loudspeaker.

$108.80
$124.99 -12.95%
In Stock

The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.

The LokSound 5 micro is actually a "small miracle": With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. These LokSound 5 micro decoders are equipped with a Next18 interface.

Adapter plugs are available (sold separately) to suit all popular digital interface types. See below for decoders with adapter plus included.

$102.00
$130.00 -21.54%
In Stock

This is a digital hand control unit (mfx and DCC). 11 locomotives can be controlled with direct access by selecting locomotive profiles stored in a quick access list. These profiles can be built manually (DCC or mfx digital address, locomotive icons and various function icons), by accessing built-in Märklin Digital locomotive database, or automatically for locomotives with digital decoders in the mfx format. 

Note: The Mobile Station need to be connected to a Connector Box (sold separately): 60116 or 60113 for HO or N-scale or the 60112 for 1 Gauge. The Connector Box will need a power supply like the 66367 (sold separately). The connector box is then supplying both power and digital signals to your track and accessories by two wires.

$112.58
$129.99 -13.39%
In Stock

The LokSound 5 micro DCC Direct Kato USA Widebody has been specially developed for installation in wide body N gauge locomotives of the Kato USA brand: Most diesel locomotives of this manufacturer come with only a common DC lighting board. Finally, these models can also be easily retrofitted with a LokSound decoder.

The LokSound 5 micro DCC Direct Kato USA Widebody with its dimensions of 47.5mm x 14mm x 4.5mm is a pure DCC decoder and comes without a loudspeaker.

$103.20
$129.00 -20%
There are not enough products in stock

This is a switched mode power pack for connections to and supplying power to the 60216, 60226 Central Station as well as the 60213-60215 Central Station and the 60175 and 60174 Boosters. Output 19 volts / 60 watts AC voltage or 15 volts / 50 watts DC voltage (can be switched with a slider switch). This is a tabletop switched mode power pack. It comes in a plastic housing. The unit has mounting tabs. Dimensions 116 x 72 x 65 mm / 4-9/16" x 2-13/16" x 2-9/16". Connections: 4-pin mini DIN high current plug. The 60045 switched mode power pack is designed only for use in dry areas.

$108.80
$124.99 -12.95%
In Stock

The LokSound 5 micro DCC Direct has been specially developed for installation in N gauge locomotives of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.

The LokSound 5 micro DCC Atlas Legacy is also a “direct style decoder developed for early (before 2016) Atlas, Intermountain (and others). The decoder was made for locos produced before sound was added during production.

This replaces the popular ESU 73100 Select Direct Micro. Both the LokSound 5 micro DCC Direct/Atlas Legacy with their dimensions of 66.0mm x 8.2mm are pure DCC decoders and come without a loudspeaker.

$108.88
$124.99 -12.89%
In Stock

The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in track N vehicles of the Kato USA brand: Most diesel locomotives of this manufacturer are installed in the American model of these decoders instead of the analog board installed as standard. Finally, these models can also be easily retrofitted with a LokSound decoder.

The LokSound 5 micro DCC Direct Kato USA with its dimensions of 60.0mm x 10.1mm is a pure DCC decoder and comes without a loudspeaker.

$108.80
$124.99 -12.95%
In Stock

The LokSound 5 micro DCC decoder is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles.

All LokSound 5 micro DCC decoders are equipped with a Next18 interface. This decoder also includes the adapter board with wire harness.

The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

Please note that these LokSound 5 micro DCC decoders does NOT come with a speaker.

$108.80
$124.99 -12.95%
In Stock

The LokSound 5 micro DCC decoder is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles.

All LokSound 5 micro DCC decoders are equipped with a Next18 interface. This decoder also includes the adapter board with wire harness and a 8-pin NEM plug.

The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

Please note that these LokSound 5 micro DCC decoders does NOT come with a speaker.

$87.80
$99.90 -12.11%
In Stock

The ECoS (ESU Command Station) is so powerful and capable that many model railroaders would like to replace their present digital station with an ECoS. It is now possible to connect your controllers like Digitrax® and Uhlenbrock® handheld throttles directly to the ECoS, thanks to the ESU L.Net Converter. Additionally, you can continue to use your feedback devices which support the well-known Loconet® communication protocol

$89.99
$99.99 -10%
There are not enough products in stock

35020 Transformer 120V / 20V / 6A (G-Scale)

Features 120V transformer provides 20V DC / 6A of continuous power. Ideal power supply for the 35010 Digital Central Station, 35015 Digital Booster, 35002 Analog Throttle and other devices. Modern "switching power supply" technology provides high power and excellent voltage stability in a small, lightweight unit. Safety agency approved

Not for use with PIKO SmartControl System components

$73.30
$82.99 -11.68%
There are not enough products in stock

LokSound 5 Fx DCC/MM/SX/M4 »Blank decoder«, 21MTC NEM660, with loudspeaker

The LokSound 5 Fx is a special edition of the LokSound family. It has no motor output and is specially designed for use in cab control cars and other cars that require sound but do not have a propulsion (motor) themselves. The decoder offers all the sound features of the other LokSound 5 members on a size of only 11mm x 15mm.

The LokSound 5 Fx decoders are offered with an 8-pole interface (NEM652) or a 21MTC socket (NEM660). An 11 x 15 mm "sugar cube" loudspeaker and sound chamber is included.

$73.30
$82.99 -11.68%
In Stock

ESU 58210 LokSound 5 Fx DCC/MM/SX/M4 »Blank decoder«, 8-pin NEM652, with loudspeaker

The LokSound 5 Fx is a special edition of the LokSound family. It has no motor output and is specially designed for use in cab control cars and other cars that require sound but do not have a propulsion (motor) themselves. The decoder offers all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.

The LokSound 5 Fx decoders are offered with an 8-pole interface (NEM652) or a 21MTC socket (NEM660). An 11 x 15 mm "sugar cube" loudspeaker and sound chamber is included.

$55.99
$69.99 -20%
In Stock

This switched mode power pack is for connecting to and supplying power to the Märklin 60114 or 60116 Track Box but suitable for many other applications requiring power compatible with this unit.

The input is 120 volts / 60 Hertz

The output 18 volts / 36 watts DC voltage. 

Dimensions 85 x 55 x 74 mm / 3-3/8" x 2-1/8" x 2-7/8".

Connections: Hollow socket 5.5/2.5 mm, positive conductor inside.

The switched mode power pack is authorized for use as a toy and comes in a plastic housing. The 66367 switched mode power pack is designed for use only indoors.

$47.80
$53.49 -10.64%
In Stock

SwitchPilot V3.0, accessory decoder for 4 twin coils magnetic, 2 x Servo, DCC/MM, 1A

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons..