Märklin HO

Märklin HO

The Märklin system is the technique of using a third rail concealed in the roadbed with only small studs protruding through the ties of the track. The two outer rails are connected electrically. This provides the simplified wiring enjoyed by larger gauges—such as for reverse loops—without seriously detracting from the realism of the track because only two of the rails are visible.

Active filters

$36.65
In Stock

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

$24.00
In Stock

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

$30.00
$34.99 -14.26%
In Stock

This extension set contains additional track sections and blocks to expand the track layout from the "Airport Express - Elevated Railroad" starter set. This is an expansion for the track layout for the Märklin my world Elevated Railroad in Levels 0 and 1. The track sections have a colored identifier for easy setup of the track layout.

$17.40
There are not enough products in stock

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

$28.00
$34.99 -19.98%
in stock

Prototype:Different versions of the German Federal Railroad (DB) type Kmmks 51 sliding roof gondola. Short version without a brakeman's platform and without a brakeman's cab. As well as a long version with a brakeman's platform or with a brakeman's cab. The cars look as they did around 1960.

Model:Selection of the short version without a brakeman's platform, the version with a brakeman's platform, and the version with a sheet metal brakeman's cab are subject to availability. All of the cars have different car numbers. The roofs can be opened on all of the cars. Each car comes individually packaged in a marked box.
Length over the buffers for each car 11.5 cm / 4-1/2" or 12.2 cm / 4-13/16".
DC wheel set for each car 2 x 700580.

NOTE: This item is sold as PER CAR not as a SET

$17.00
$19.99 -14.96%
In Stock

A Really Big Railroad Bridge!

This bridge is quickly set up with its 4 sturdy pillars and allows your elevated railroad to hurtle across broad valleys. Build your play world with roads, rivers, or lakes. With your new big bridge, the Airport Express will zoom across them and provide endless play.

  • The ideal add-on for the Märklin my world Elevated Railroad from the "Airport Express – Elevated Railroad" starter set.
  • Great play fun from playing in Levels 0 and 1.
  • Building and expanding the Märklin my world Elevated Railroad is a lot of fun.
  • 39-piece building block set for expanding the Märklin my world Elevated Railroad.


 



$24.00
There are not enough products in stock

This is a kit for converting C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from a 72752 turnout control box with a feedback function or from a turnout installation Decoder1. This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts.

$46.20
In Stock

Märklin HO 3-rail C-track | Three-Way Turnout

Length 188.3 mm / 7-13/32" / 2 x 24.3°.

Connection dimensions on both sides are the same as 24611/24612 turnouts. Asymmetrical frog area with offset switch rails. Two hand levers included. Can be retrofitted with two 74491 electric mechanisms and two 74470 turnout lanterns. Digital operation is possible with a 60831 or 74465 decoder.