Walthers Part # 800-6000,
A scale

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Walthers Part # 800-6006
All scale
 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Walthers Part # 800-6012
A scale, Retail: $250.00

 
Easy-to-install and wire, slow-motion switch machine takes three seconds to complete the throw using a precision gear drive. Includes linkage and features auxiliary contacts for two SPDT switches.

Non-Insulated pkg(8)
Walthers Part # 800-9602
A scale, Retail: $2.95

 
Female .110" solderless connectors for all Circuitron printed circuit boards.

2 Amps, Up to 24 Volt-Amphere, 16-Volt Accessory Output
Walthers Part # 942-4000

Built tough for dependable service with the power to handle HO, S and O Scale equipment, the Walthers Controls DC Train Control makes a great addition to your layout with features that include:

This adapter is suitable for N-scale and accessories.

INPUT: 100-240V (comes with cord for NA 120V) 1A 50/60 Hz

OUTPUT: 12V DC 2.5A

This adapter is suitable for N-scale DC, DCC controllers and accessories.

INPUT: 120VAC 60 Hz 20.5A

OUTPUT: 12V DC 1.5A

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars.

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars.

Small modules that can easily be installed either in cabs or in coaches, makes fitting prototypical lighting of your vehicles a simple task.

Small modules that can easily be installed either in cabs or as end-of-train lights make fitting prototypical lighting of your vehicles a simple task.

ESU is very proud to present to you the new interior LED lighting system for passenger cabins. This system allows you to retrofit your cars with a prototypical and steady interior lighting.

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars.

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars.

ESU is very proud to present to you the new interior LED lighting system for passenger cabins. This system allows you to retrofit your cars with a prototypical and steady interior lighting.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

Turntable Extension Track Power Feeder Kit | Kato

Article No. 20-284 Turntable Extension - N Scale

Electric Turntable Cable 150cm (59 1/6") | Kato

Article No. 20-287 - N-Gauge
MSRP $23.50 USD

For HO and N Scale Trains

Includes:

- Controller

- Kato Standard SX Power Pack - 12V DC (for 120V) : output DC 13.5V 2.2A

The Kato Standard SX Power Pack is designed to keep your HO and N Scale standard DC trains running smoothly. Revised in 2024, this power pack is 100% compatible with all Unitrack electrical accessories and is an in-kind replacement for previous Kato power packs. It is also upgradeable with alternative AC adapters that will allow greater output for larger layouts (sold separately). The Standard SX includes the controller with speed knob and reverser lever and also matches the pack supplied with M1 and M2 Master Series Oval Sets (sold separately). The Standard SX Power Pack is part of the extensive line of Kato HO and N Scale Unitrack track and accessories.

For Use with Smart Controller and Sound Box
Walthers Part # 381-22082
N scale, Retail: $25.00
 
This Kato Power Supply is a great for use on standard DC layouts. It has an output of 13.5V DC 2.2A making it ideal for N Scale layouts. It can also be used with the 381-22019 Smart Device Controller (in place of the supplied power supply for added power) or 381-220181 Standard SX Power Pack. 

16VDC for Use with Smart Controller and Sound Box
Walthers Part # 381-22083
 
This Kato Power Supply is a great for use on standard DC layouts. It has an output of 16V DC 2.1A making it ideal for HO Scale layouts. It can also be used with the 381-22019 Smart Device Controller (in place of the supplied power supply for added power) or 381-220181 Standard SX Power Pack.

S-Joiner (Viaduct Connector) [20 pcs] | Kato

Article No. 24-817 - HO,N-Gauge
MSRP $5.50 USD

UniJoiner, Brown [20 pcs] | Kato

Article No. 24-819 - HO,N-Gauge
MSRP $6.50 USD

1/2 (One-Sided) UniJoiner , Brown [20 pcs] | Kato

Article No. 24-820 - HO,N-Gauge
MSRP $6.50 USD

DC Extension Cord [1 pc] 35" (90cm) long
Walthers Part # 381-24825
A scale

AC Extension Cord 90cm (35") | Kato

Article No. 24-826 - HO,N-Gauge

Double Track Power Cord 90cm (35") [2pcs.] | Kato

Article No. 24-828 - N-Gauge
MSRP $10.00 USD

3-Way Extension Cord 90cm (35") | Kato

Article No. 24-833 - HO,N-Gauge

Turnout Extension Cord 90cm (35") | Kato

Article No. 24-841 - HO,N-Gauge

DC Converter 90cm (35") | Kato

Article No. 24-842 - HO,N-Gauge

Terminal Adapter Cord 90cm (35") | Kato

Article No. 24-843 - HO,N-Gauge
MSRP $3.50 USD

Automatic Three-Color Signal Power Supply [1 pc] | Kato

Article No. 24-844 - N-Gauge

Automatic Three-Color Signal Extension Cord [1 pc]

• Used to connect #20-605-1 to #24-844, also has #4 turnout compatible plug on one side and can be used to modify #24-841 Turnout extension cord if you lose the cable included with the turnout.

Power Feed Control Switch | Kato

Article No. 24-850 - N-Gauge

KATO Unitrack | HO and N scale | track accessories

5-Way Extension Cord - Unitrack -- 35" 88.9cm

Tram Feeder Power Cable | Kato

Article No. 44-847 - N-Gauge
MSRP $8.00 USD

This adapter is suitable for N-scale DC, DCC controllers and accessories.

INPUT: 120VAC 60 Hz 23W

OUTPUT: 12V DC 1A

MODEL: AM-1201000D41

This connector adapter is for connections from users such as lights to a switched mode power pack with a 4-pin mini DIN high current plug.

This is a 10-pin to 7-pin adapter cable for connecting a the 60653 Mobile Station, the 60652 Mobile Station, and the 66950 Trix Mobile Station to the 60125 Terminal and a 3rd Mobile Station to the 60213-60215 Central Stations.

This cable can also be used to connect a second 60652 Mobile Station to the 24088 feeder track or to the 60115 Connector Box (H0) or 60111 Connector Box (Märklin 1).

Märklin 7100 (HO) Single conductor wire - Gray. 10 m / 33".

Single conductor wire - Blue 10 m / 33".

Single conductor wire - Brown 10 m / 33".

Single conductor wire - Yellow 10 m / 33".

Single conductor wire - Red 10 m / 33".

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

BLUE wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

BROWN wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

RED wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

YELLOW wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

A package comes with 10 pieces.

These plugs and sockets cannot be used with the earlier versions (package, item no. 7130). The sockets will fit as plugs with some limitations into the sockets on the older versions of control boxes. The control components and decoders in the current Märklin program have been changed to the new standard for plugs and sockets

A package comes with 10 pieces.

These plugs and sockets cannot be used with the earlier versions (package, item no. 7130). The sockets will fit as plugs with some limitations into the sockets on the older versions of control boxes. The control components and decoders in the current Märklin program have been changed to the new standard for plugs and sockets

A package comes with 10 pieces.

These plugs and sockets cannot be used with the earlier versions (package, item no. 7130). The sockets will fit as plugs with some limitations into the sockets on the older versions of control boxes. The control components and decoders in the current Märklin program have been changed to the new standard for plugs and sockets