Märklin C-track

Active filters

$46.20
There are not enough products in stock

Märklin HO 3-rail C-track | Three-Way Turnout

Length 188.3 mm / 7-13/32" / 2 x 24.3°.

Connection dimensions on both sides are the same as 24611/24612 turnouts. Asymmetrical frog area with offset switch rails. Two hand levers included. Can be retrofitted with two 74491 electric mechanisms and two 74470 turnout lanterns. Digital operation is possible with a 60831 or 74465 decoder.

$35.10
In Stock

3-Rail C Track - HO scale | Märklin
Article No. 24711

Left Hand Wide Radius Turnout

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog.

2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece included. Manual hand lever included. Can be retrofitted with 74491 electric turnout motor, 74470 turnout lantern, and 74461 turnout decoder

$35.10
In Stock

3-Rail C Track - HO scale | Märklin
Article No. 24712

Right Hand Wide Radius Turnout

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog.

2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece included. Manual hand lever included. Can be retrofitted with 74491 electric turnout motor, 74470 turnout lantern, and 74461 turnout decoder

$43.60
There are not enough products in stock

Märklin HO C-track | Right Wide Radius Curved Turnout

A long-standing wish of Märklin fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Märklin is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions.

$26.80
In Stock

This control box is for operating 4 double solenoid accessories with end shutoff contacts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 7549 turnout mechanism (K) or the 74490 turnout mechanism (C). The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

$21.35
In Stock

This control box is for operating 4 double solenoid accessories such as turnouts and signals or up to 8 uncoupler tracks. The position of the buttons shows the settings for accessories connected to the sockets for those buttons. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

$21.35
In Stock

This control box is for turning 4 different track or accessory circuits on and off. For example, power can be controlled in 4 storage sidings in 4 different track circuits. Unit comes with 8 sockets on the back. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

$21.35
In Stock

This control box is for dividing a track or accessory circuit into 4 different circuits, each with two connections. For example, 4 storage sidings in the same track circuit or 4 users in the same accessory circuit can be turned on and off. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included.

Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

$36.65
In Stock

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.