C-Track -- End Piece/Roadbed | Märklin

Article No. 24001 C Track - HO Scale

Snap-in end piece for the C Track roadbed. For the end of a train line, sidings, display bases, and display cases.

• Length 16.5 mm / 5/8"

Gauge H0 - Article No. 74030
Center Rail Insulators for Märklin and TRIX C-track

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

3-Rail C Track -- Straight | Märklin

Article No. 24188 C Track - HO Scale

• Length 188.3 mm / 7-13/32"

3-Rail C Track -- Straight | Märklin

Article No. 24172 C Track - HO Scale

• Length: 6-3/4" 172 mm

3-Rail C Track -- R2 Curved | Märklin

Article No. 24215 C Track - HO Scale

• R2 = 437.5 mm / 17-1/4" / 15°

3-Rail C Track | Märklin

Article No. 24207 curved C Track - HO Scale - R2 7.5°

R2 = radius 437.5 mm / 17-1/4"

3-Rail C Track | Märklin

Article No. 24206 curved C Track - HO Scale - R2 5.7°

NOTE: 5.7° extends 24611 and 24612 turnouts to 30°

R2 = radius 437.5 mm / 17-1/4" / 

3-Rail C Track -- Straight | Märklin

Article No. 24094 C Track - HO Scale

• Length 94.2 mm / 3-11/16"

3-Rail C Track -- Straight | Märklin

Article No. 24077 C Track - HO Scale

• Length 77.5 mm / 3-1/16"

3-Rail C Track -- Curve | Märklin

Article No. 24130 C Track - HO Scale

• R1 = 360 mm / 14-3/16" / 30°

3-Rail C Track | Märklin

Article No. 24107 curved C Track - HO Scale - R1 7.5°

R1 = radius 360 mm / 14-3/16"

3-Rail C Track -- R1 Curved | Märklin

Article No. 24115 C Track - HO Scale

• R1 = 360 mm / 14-3/16" / 15°

3-Rail C Track -- Straight | Märklin

Article No. 24071 C Track - HO Scale

This track is used on both branches of the wide radius turnouts and wide angle crossings.

• - Length 70.8 mm / 2-13/16"
• - Removable roadbed slope

3-Rail C Track -- Straight | Märklin

Article No. 24064 C Track - HO Scale

This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings.

• Length 64.3 mm / 2-9/16"

3-Rail C Track -- R2 Curved | Märklin

Article No. 24230 C Track - HO Scale

• R2 = 437.5 mm / 17-1/4" / 30°

3-Rail C Track -- R2 Curved | Märklin

Article No. 24224 C Track - HO Scale

• R2 = 437.5 mm / 17-1/4" / 24.3° (turnout branch)

3-Rail C Track -- R3 Curved | Märklin

Article No. 24315 C Track - HO Scale

This track section is required on both branches of the 24771 and 24772 wide radius curved turnouts.

• R3 = 515 mm / 20-1/4" / 15°
• Removable roadbed slopes

3-Rail C Track -- Straight | Märklin

Article No. 24236 C Track - HO Scale

This track is the same length as the length of the wide radius turnouts and wide angle crossings.

• Length 229.3 mm / 9"

3-Rail C Track | Märklin

Article No. 24229 straight C Track - HO Scale

Length 229.3 mm / 9"

NOTE: Offsetting straight track to the length of the offsetting curve on the wide radius turnouts and wide angle crossings (24711, 24712 and 24630). 

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39".

The 74040 feeder wire is not suitable if interference suppressor is required. If so yo may use the 74046 Feeder wire set with interference suppressor.

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

3-Rail C Track -- R3 Curved | Märklin

Article No. 24330 C Track - HO Scale

• R3 = 515 mm / 20-1/4" / 30°

3-Rail C Track - HO scale | Märklin
Article No. 24912

Radius 1,114.6 mm / 43-7/8". Curve 12.1°. Complementary curve for the wide radius turnouts and wide angle crossings. Also suitable for use in constructing sweeping main lines.

Straight Track | Märklin (HO) C-track

Article No. 24360 C Track - HO Scale

• Length 360 mm / 14-3/16"
• Same length as 24172 and 24188 combined

3-Rail C Track -- R4 Curved | Märklin

Article No. 24430 C Track - HO Scale

• R4 = 579.3 mm / 22-13/16" / 30°

3-Rail C Track -- R5 Curved | Märklin

Article No. 24530 C Track - HO Scale

• R5 = 643.6 mm / 25-5/16" / 30°

Märklin HO C-track | Track End with a Bumper

77.5 mm + 5 mm / 3-1/16" + 3/16".

Gauge H0 - Article No. 74990
Track Screws for Märklin and TRIX C-track

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

3-Rail C Track - HO scale| Märklin

Article No. 24951

• 180 mm / 7-3/32".
• Enables transition from M-track track to-C Track.
• 2 pack

3-Rail C Track - HO scale| Märklin

Article No. 24922

• 180 mm / 7-3/32".
• Enables transition from K-track track to-C Track.
• 2PK

Märklin System C-Track | Light Mast for the Uncoupler Track

The light mast can be plugged into the Märklin 24997 C Track or TRX 62997 C-track (DC). The mast signal lights up when the uncoupler track is activated. Metal mast. Height 85 mm / 3-38". This light mast is technically the same as the earlier 5113 mast.

3-Rail C Track -- Track Feeder | Märklin

Article No. 24088 C Track - HO Scale
MSRP $25.00 USD

For connecting a transformer and up to 2 Mobile Stations 60652

• 188.3 mm /7-13/32"

3-Rail C Track -- Straight Circuit Track | Märklin

Article No. 24994 C Track - HO Scale

• - Length 94.2 mm / 3-11/16"

Momentary contact by means of the locomotive/car pickup shoe.

Märklin HO C-track | 3-rail

Track End with a Bumper and Lantern

77.5 mm + 5 mm / 3-1/16" + 3/16".

Motor brushes for older style motors requiring one carbon and one copper brush. E600300 includes 10 pairs.

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.

3-Rail C Track -- R2 Curved Circuit | Märklin

Article No. 24294 C Track - HO Scale

Momentary contact by means of locomotive/car pickup shoe.

• R2 = 437.5 mm / 17-1/4" / 15°

3-Rail C Track -- R1 Curved Circuit | Märklin

Article No. 24194 C Track - HO Scale

Momentary contact by means of locomotive/car pickup shoe.

• R1 = 360 mm / 14-3/16" / 15°

3-Rail C-Track - HO scale | Märklin

Article No. 24995 | Contact Track (2PK)

Two straight track sections, each 94.2 mm / 3-11/16". Continuous contact through wheel sets. With insulated section of rail for track occupation feedback when traversed by a train. Can be extended with regular straight or curved track sections.

In over 160 pages, you get extensive tips for building a layout including essential information about track geometry, layout control, and accessories. An ideal handbook for designing and building a modern track layout. In addition, there are numerous suggestions for updating existing layouts and taking them into the digital world. There are also 25 track plans for C and K Track included in this handbook.

This control box is for operating 4 double solenoid accessories such as turnouts and signals or up to 8 uncoupler tracks. The position of the buttons shows the settings for accessories connected to the sockets for those buttons. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This control box is for turning 4 different track or accessory circuits on and off. For example, power can be controlled in 4 storage sidings in 4 different track circuits. Unit comes with 8 sockets on the back. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This control box is for dividing a track or accessory circuit into 4 different circuits, each with two connections. For example, 4 storage sidings in the same track circuit or 4 users in the same accessory circuit can be turned on and off. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included.

Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

3-Rail C Track -- Right Turnout | Märklin

Article No. 24612 C Track - HO Scale

3-Rail C Track -- Left Turnout | Märklin

Article No. 24611 C Track - HO Scale

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

3-Rail C Track -- Right Curved Turnout | Märklin

Article No. 24672 C Track - HO Scale

3-Rail C Track -- Left Curved Turnout | Märklin

Article No. 24671 C Track - HO Scale

This is a kit for converting C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from a 72752 turnout control box with a feedback function or from a turnout installation Decoder1. This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts.

3-Rail C Track - HO scale | Märklin
Article No. 24649

Crossing - 103.3 mm / 4-1/16". 48.6°. For double crossovers or intersecting parallel routes.

3-Rail C Track - HO scale | Märklin
Article No. 24640

Crossing - 188.3 mm / 7-13/32" / 24.3°.

This control box is for operating 4 double solenoid accessories with end shutoff contacts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 7549 turnout mechanism (K) or the 74490 turnout mechanism (C). The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This control box is for operating 4 turnouts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 74492 turnout mechanism. 4-conductor wire with plugs included for connecting several controllers.

We recommend item number 71054 for extending the cable connection between the turnout controller and the turnout mechanism.

Märklin System C-Track | HO scale

Uncoupling Track

94.2 mm / 3-11/16", electric.

3-Rail C Track - HO scale | Märklin
Article No. 24740

Wide Angle Crossing

Length 236.1 mm / 9-5/16". Crossing angle 12.1°.

Crossing legs electrically isolated from each other. 4 sections of 24071 track are required at the ends of the crossing (not included with 24740). 2 suitable roadbed fill-in pieces included

Märklin H0 - Article No. 24900

C1 C Track Extension Set

Contents: 2 no. 24172 straight track, 1 no. 24224 curved track, 1 no. 24611 left turnout, 1 no. 24977 track bumper, and instructions.

3-Rail C Track - HO scale | Märklin
Article No. 24711

Left Hand Wide Radius Turnout

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog.

2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece included. Manual hand lever included. Can be retrofitted with 74491 electric turnout motor, 74470 turnout lantern, and 74461 turnout decoder

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

3-Rail C Track - HO scale | Märklin
Article No. 24712

Right Hand Wide Radius Turnout

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog.

2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece included. Manual hand lever included. Can be retrofitted with 74491 electric turnout motor, 74470 turnout lantern, and 74461 turnout decoder