3-Rail C Track -- Straight | Märklin

Article No. 24188 C Track - HO Scale

• Length 188.3 mm / 7-13/32"

Straight Track | Märklin (HO) C-track

Article No. 24360 C Track - HO Scale

• Length 360 mm / 14-3/16"
• Same length as 24172 and 24188 combined

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

3-Rail C Track -- R4 Curved | Märklin

Article No. 24430 C Track - HO Scale

• R4 = 579.3 mm / 22-13/16" / 30°

3-Rail C Track -- R3 Curved | Märklin

Article No. 24330 C Track - HO Scale

• R3 = 515 mm / 20-1/4" / 30°

3-Rail C Track -- Straight | Märklin

Article No. 24064 C Track - HO Scale

This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings.

• Length 64.3 mm / 2-9/16"

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

3-Rail C Track -- R2 Curved | Märklin

Article No. 24230 C Track - HO Scale

• R2 = 437.5 mm / 17-1/4" / 30°

3-Rail C Track -- Straight | Märklin

Article No. 24077 C Track - HO Scale

• Length 77.5 mm / 3-1/16"

3-Rail C Track -- R2 Curved | Märklin

Article No. 24224 C Track - HO Scale

• R2 = 437.5 mm / 17-1/4" / 24.3° (turnout branch)

3-Rail C Track | Märklin

Article No. 24206 curved C Track - HO Scale - R2 5.7°

NOTE: 5.7° extends 24611 and 24612 turnouts to 30°

R2 = radius 437.5 mm / 17-1/4" / 

3-Rail C Track -- Straight | Märklin

Article No. 24236 C Track - HO Scale

This track is the same length as the length of the wide radius turnouts and wide angle crossings.

• Length 229.3 mm / 9"

3-Rail C Track -- Straight | Märklin

Article No. 24172 C Track - HO Scale

• Length: 6-3/4" 172 mm

3-Rail C Track -- Straight | Märklin

Article No. 24071 C Track - HO Scale

This track is used on both branches of the wide radius turnouts and wide angle crossings.

• - Length 70.8 mm / 2-13/16"
• - Removable roadbed slope

3-Rail C Track | Märklin

Article No. 24229 straight C Track - HO Scale

Length 229.3 mm / 9"

NOTE: Offsetting straight track to the length of the offsetting curve on the wide radius turnouts and wide angle crossings (24711, 24712 and 24630). 

3-Rail C Track -- Straight | Märklin

Article No. 24094 C Track - HO Scale

• Length 94.2 mm / 3-11/16"

3-Rail C Track -- R5 Curved | Märklin

Article No. 24530 C Track - HO Scale

• R5 = 643.6 mm / 25-5/16" / 30°

3-Rail C Track | Märklin

Article No. 24207 curved C Track - HO Scale - R2 7.5°

R2 = radius 437.5 mm / 17-1/4"

3-Rail C Track -- R1 Curved | Märklin

Article No. 24115 C Track - HO Scale

• R1 = 360 mm / 14-3/16" / 15°

Märklin HO C-track | Track End with a Bumper

77.5 mm + 5 mm / 3-1/16" + 3/16".

3-Rail C Track -- R2 Curved | Märklin

Article No. 24215 C Track - HO Scale

• R2 = 437.5 mm / 17-1/4" / 15°

3-Rail C Track -- Curve | Märklin

Article No. 24130 C Track - HO Scale

• R1 = 360 mm / 14-3/16" / 30°

3-Rail C Track -- R3 Curved | Märklin

Article No. 24315 C Track - HO Scale

This track section is required on both branches of the 24771 and 24772 wide radius curved turnouts.

• R3 = 515 mm / 20-1/4" / 15°
• Removable roadbed slopes

3-Rail C Track | Märklin

Article No. 24107 curved C Track - HO Scale - R1 7.5°

R1 = radius 360 mm / 14-3/16"

C-Track -- End Piece/Roadbed | Märklin

Article No. 24001 C Track - HO Scale

Snap-in end piece for the C Track roadbed. For the end of a train line, sidings, display bases, and display cases.

• Length 16.5 mm / 5/8"

Märklin H0 - Article No. 24802

Digital C Track D2 Extension

Contents: 3 no. 24188 straight track, 5 no. 24172 straight track, 2 no. 24224 curved track, 1 no. 24611 left turnout and 1 no. 24612 right turnout, each with a built-in decoder and mechanism. Instructions for setup and wiring are included.

The ideal way to get started in the digital world of Märklin H0 with easy-to-set-up C Track layout. Radius R2 oval of track.

3-Rail C Track -- Right Turnout | Märklin

Article No. 24612 C Track - HO Scale

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

3-Rail C Track -- Left Turnout | Märklin

Article No. 24611 C Track - HO Scale

Gauge H0 - Article No. 74030
Center Rail Insulators for Märklin and TRIX C-track

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

3-Rail C Track - HO scale | Märklin
Article No. 24912

Radius 1,114.6 mm / 43-7/8". Curve 12.1°. Complementary curve for the wide radius turnouts and wide angle crossings. Also suitable for use in constructing sweeping main lines.

This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.

This is a kit for converting C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from a 72752 turnout control box with a feedback function or from a turnout installation Decoder1. This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts.

Märklin HO 3-rail C-track | Three-Way Turnout

Length 188.3 mm / 7-13/32" / 2 x 24.3°.

Connection dimensions on both sides are the same as 24611/24612 turnouts. Asymmetrical frog area with offset switch rails. Two hand levers included. Can be retrofitted with two 74491 electric mechanisms and two 74470 turnout lanterns. Digital operation is possible with a 60831 or 74465 decoder.

3-Rail C Track -- Double Slip Switch | Märklin

Article No. 24624 C Track - HO Scale

Märklin H0 - Article No. 24905

C Track C5 Track Extension Set

Contents: 7 no. 24188 straight track, 7 no. 24172 straight track, 2 no. 24094 straight track, 1 no. 24224 curved track, 1 no. 24611 turnout, 1 no. 24612 turnout, 1 no. 24620 double slip switch, 4 no. 24977 track ends with track bumpers and instructions.

Märklin H0 - Article No. 24903

C Track C3 Track Extension Set

Contents: 7 no. 24188 straight track, 7 no. 24172 straight track, 2 no. 24130 curved track, 1 no. 24671 curved turnout, 1 no. 24672 curved turnout and instructions.

This single-track railroad grade crossing has half gates and is fully assembled. This grade crossing can be connected directly to C Track. The grade crossing has 2 solenoid activated gates with 2 red warning lights, which come on when the gates come down. This grade crossing is ready to be connected to the layout and features easy installation.

Contact track set: 3 straight tracks each 94.2 mm / 3-3/4".

Dimensions for each base half 137 x 95 mm / 5-3/8" x 3-3/4".

3-Rail C Track -- Left Curved Turnout | Märklin

Article No. 24671 C Track - HO Scale

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39".

The 74040 feeder wire is not suitable if interference suppressor is required. If so yo may use the 74046 Feeder wire set with interference suppressor.

Gauge H0 - Article No. 74990
Track Screws for Märklin and TRIX C-track

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

Märklin H0 - Article No. 24904

C Track C4 Track Extension Set

Contents: 4 no. 24188 straight track, 4 no. 24172 straight track, 2 no. 24077 straight track, 2 no. 24130 curved track, 6 no. 24230 curved track, 1 no. 24671 curved turnout, 1 no. 24672 curved turnout and instructions.

This control box is for operating 4 double solenoid accessories such as turnouts and signals or up to 8 uncoupler tracks. The position of the buttons shows the settings for accessories connected to the sockets for those buttons. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This control box is for operating 4 double solenoid accessories with end shutoff contacts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 7549 turnout mechanism (K) or the 74490 turnout mechanism (C). The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

In over 160 pages, you get extensive tips for building a layout including essential information about track geometry, layout control, and accessories. An ideal handbook for designing and building a modern track layout. In addition, there are numerous suggestions for updating existing layouts and taking them into the digital world. There are also 25 track plans for C and K Track included in this handbook.

Märklin System C-Track | HO scale

Uncoupling Track

94.2 mm / 3-11/16", electric.

Märklin HO C-track | Left Wide Radius Curved Turnout

Wide Radius Left Curved Turnout. A long-standing wish of Märklin fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Märklin is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions.

Märklin H0 - Article No. 24900

C1 C Track Extension Set

Contents: 2 no. 24172 straight track, 1 no. 24224 curved track, 1 no. 24611 left turnout, 1 no. 24977 track bumper, and instructions.

Märklin H0 - Article No. 24902

C Track C2 Extension Set

Contents: 3 no. 24188 straight track, 5 no. 24172 straight track, 2 no. 24224 curved track, 1 no. 24611 turnout, 1 no. 24612 turnout and instructions.

Motor brushes for older style motors requiring one carbon and one copper brush. E600300 includes 10 pairs.

3-Rail C-Track - HO scale | Märklin

Article No. 24995 | Contact Track (2PK)

Two straight track sections, each 94.2 mm / 3-11/16". Continuous contact through wheel sets. With insulated section of rail for track occupation feedback when traversed by a train. Can be extended with regular straight or curved track sections.

3-Rail C Track - HO scale| Märklin

Article No. 24922

• 180 mm / 7-3/32".
• Enables transition from K-track track to-C Track.
• 2PK

3-Rail C Track - HO scale | Märklin
Article No. 24740

Wide Angle Crossing

Length 236.1 mm / 9-5/16". Crossing angle 12.1°.

Crossing legs electrically isolated from each other. 4 sections of 24071 track are required at the ends of the crossing (not included with 24740). 2 suitable roadbed fill-in pieces included

3-Rail C Track - HO scale | Märklin
Article No. 24712

Right Hand Wide Radius Turnout

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog.

2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece included. Manual hand lever included. Can be retrofitted with 74491 electric turnout motor, 74470 turnout lantern, and 74461 turnout decoder

3-Rail C Track - HO scale | Märklin
Article No. 24711

Left Hand Wide Radius Turnout

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog.

2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece included. Manual hand lever included. Can be retrofitted with 74491 electric turnout motor, 74470 turnout lantern, and 74461 turnout decoder

3-Rail C Track - HO scale | Märklin
Article No. 24640

Crossing - 188.3 mm / 7-13/32" / 24.3°.

This set has 3 track spoke connections for C Track. They can be inserted at the location of your choice on the rim of the turntable pit. The track spoke connections have built-in locomotive current contacts. Length 57.5 cm / 2-1/4".

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

This is a standard design 23 meter / 74 foot 9 inch turntable. It is designed for conventional and digital locomotive operation. The remote controlled deck has a built-in motor. It can only be controlled digitally with the Mobile Station 2 and Central-Station 2 and 3 (not included). Control with the Central-Station 2 and 3 is especially easy by means of track indexing (after carrying out an update), or with different digital central controllers that use the DCC digital format.

This turntable can be used with the 72886 roundhouse locomotive shed. Various sound functions can be controlled. LEDs are used to light the turntable operator's hut and the outside lighting and they can be controlled.

This link will take you to the 74861 Manual (turntable manual)