Wireless Operating Enjoyment
The MS WLAN feature an interactive display and a newly designed control knob

This complete 4-pack set consist off:
- 60667 Mobile Station WLAN
- 60116 Digital Connector Box
- 60117 WLAN Receiver Box
- 66367 Switched Mode Power Pack, 120 Volts

Operate your layout wirelessly with one hand by using the Mobile Station WLAN!

NOTE: All components can be bought separately.

Wireless Operating Enjoyment
The MS WLAN feature an interactive display and a newly designed control knob

Note: The Mobile Station WLAN require CS2 or CS3/CS3+ with a WLAN connection or the 60117 WLAN Receiver Box is required as a receiver.

Operate your layout wirelessly with one hand by using the Mobile Station WLAN!

The Connect-6021 is for bidirectional connections between the former Märklin Digital System and the 60213-60215 and 60216/60226 Central Station. This allows you to control 80 locomotives (Motorola format as well as mfx) with the 6021 Control Unit, control locomotive auxiliary functions (function, F1 – F4), control solenoid accessories with synchronized display of their settings.

This connection also allows you to use the 6043 memory as well as the memory functionality of the 60213-60215 and 60216/60226 Central Station. Connections on the back side: M-Bus cable (for connections to the 60213-60215 and 60216/60226). Side connections: Multi-pin strip connector for connections to the "6021 world". Dimensions 135 x 120 x 80 mm / 5-5/16" x 4-3/4" x 3-1/8".

This WLAN receiver box is for wireless control using the MS WLAN (60667 WLAN Mobile Station) or the Infrared Controller supplied in some Starter Sets. It serves as an adapter for operation with the Digital Connector Box (60114, 60116) or a Central Station (60216, 60226, as well as 60213-60215). This unit allows you to couple the MS WLAN (60667) or the Start-Up infrared controllers with these devices to control your locomotives and other devices.

Gauge 1 - Article No. 60195

100 VA, 120 Volt Switched Mode Power Pack

This switched mode power pack is for connecting to and for powering the 60216, 60226, as well as 60214/60215 Central Stations, and the 60174 and 60175 Boosters. The input is 120 volts / 60 Hertz, and the output is 19 volts / 100 watts DC voltage. 

Article No. 6646
120 Volt Transformer. 32 VA. UL tested

The track voltage can be adjusted between 5 and 17 volts (AC). The accessory voltage is 17 volts (AC).

Plastic housing. Dimensions 140 x 120 x 80 cm / 5-1/2" x 4-3/4" x 3-1/8". UL tested.

Only for indoor use.

This is a digital hand control unit (mfx and DCC). 11 locomotives can be controlled with direct access by selecting locomotive profiles stored in a quick access list. These profiles can be built manually (DCC or mfx digital address, locomotive icons and various function icons), by accessing built-in Märklin Digital locomotive database, or automatically for locomotives with digital decoders in the mfx format. 

Note: The Mobile Station need to be connected to a Connector Box (sold separately): 60116 or 60113 for HO or N-scale or the 60112 for 1 Gauge. The Connector Box will need a power supply like the 66367 (sold separately). The connector box is then supplying both power and digital signals to your track and accessories by two wires.

The k 83/m 83/m 84 Universal Power Supply Unit is for supplying power to k 83, m 83, and m 84 decoders from the 66361/66360/66365/66367 switched mode power packs. One Universal Power Supply Unit is required per group of accessory decoders (note the maximum power limit!).

This is a receiver for switching turnouts, signals, and uncoupler tracks. The m83 supports the digital formats Motorola, DCC, and mfx. The digital address can be set by means of coding switches or by means of the programming track in 4 steps. 

This switched mode power pack is for connecting to and supplying power to the Märklin 60114 or 60116 Track Box but suitable for many other applications requiring power compatible with this unit.

The input is 120 volts / 60 Hertz

The output 18 volts / 36 watts DC voltage. 

Dimensions 85 x 55 x 74 mm / 3-3/8" x 2-1/8" x 2-7/8".

Connections: Hollow socket 5.5/2.5 mm, positive conductor inside.

The switched mode power pack is authorized for use as a toy and comes in a plastic housing. The 66367 switched mode power pack is designed for use only indoors.

This is for connecting a 66360/66510/66367 switched mode power pack and up to 2 Mobile Stations (60657 for Märklin and 66955 for TRIX).

Dimensions 96 x 85 x 40 mm / 3-3/4” x 3-3/8” x 1-9/16”

This is for converting Märklin locomotives with built-in AC/DC / field coil motors. The AC/DC märklin locomotive decoder supports the digital formats mfx, MM1, MM2, and DCC. It has particularly powerful function outputs for old Telex couplers, light bulbs, and smoke generators. The classic unregulated running behavior under different loads remains preserved on "Old and Youngtimers" upgraded with this decoder.

This is a circuit board with 2 buffer capacitors with each 1 Farad for connection to the mLD3 und mSD3, item numbers 60972, 60975, 60976, and 60977. The buffer capacitor prevents light flickering and sound dropout from dirty track sections.

This is a set for installation in a locomotive and comes with a controlled digital decoder and a powerful motor (conversion kit). It will fit into most Märklin H0 locomotives with drum-style commutator motors. The decoder has 80 programmable addresses, automatic switching between the modes of operation, a load compensation feature, and a digitally controlled connection for headlights / marker lights that change over with the direction of travel. The acceleration and braking delay can be controlled with a 6021 Control Unit or with Märklin Digital. The motor has a 5-pole armature, a powerful permanent magnet field, and a pre-installed bearing plate. Installation hardware is included.

Decoder dimensions 25 x 17 x 6 mm / 1" x 11/16" x 1/4".

This decoder is for converting Märklin/Trix H0 locomotives with built-in high-efficiency motors or other DC motors. The märklin LokDecoder3 has a 21-pin interface connector and an accompanying interface connector circuit board for upgrading analog and digital locomotives. The märklin LokDecoder3 supports the digital formats mfx, MM1, MM2, and DCC

This decoder is for converting Märklin/Trix H0 locomotives with built-in high-efficiency motors or other DC motors. The märklin LokDecoder mLD3 has a wiring harness soldered to it. The märklin LokDecoder mLD3 supports the digital formats mfx, MM1, MM2, and DCC. A plug for NEM 652 interface connectors is included for do-it-yourself soldering.

This set is for upgrading many Märklin H0 locomotives with smaller design flat-style commutator motors to the five-pole, high-efficiency motor. The set consists of a high-efficiency motor and installation hardware.

This set is for upgrading most Märklin H0 locomotives with drum-style commutator motors to the five-pole, high-efficiency motor. The set consists of a high-efficiency motor and installation hardware.

This set is for upgrading many Märklin H0 locomotives with larger design flat-style commutator motors to the five-pole, high-efficiency motor. The set consists of a high-efficiency motor in different designs and installation hardware.

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

Install from below on a locomotive.

Märklin wall clock in a train station design.

High quality, simple, and unmistakable with a particularly large clock face. Diameter 34 cm.

This kit consists of a smoke generator insert, replacement smoke tube, cleaning wire, and tweezers. Install from above a locomotive.

Märklin | HO scale (1:87) | lighting

Double Streetlight
Height 100 mm / 3-15/16"

This is a large refill bottle with 250 ml / 8.45 oz. for all smoke units and for 1 Gauge models with cylinder steam. You can find information on hazard warnings and the safety data sheet under Instructions / Operating Manual.

Lighted (none working) Platform Clock

Height 56 mm / 2-7/32""

Suitable for maintenance work on H0 and Z models.

Contents: 1 each PH 00, PH 0 and PH 1 Philips screwdrivers. 1 each 2.0 mm and 3.0 mm flat blade screwdrivers. 1 each 2.5 mm, 3.0 mm and 3.5 mm nut drivers. 1 regular tweezers and 1 compression tweezers.

Woodland Scenics | HO scale (1:87) | lighting

Lamp Post Street Lights (3 pack)

Use to light street corners, residential walkways, parks and more. 20mA set

Dimensions - 0.185" w x 2.071" h (4.7 mm w x 52.6 mm h)

Woodland Scenics | HO scale (1:87) | lighting

Wooden Pole Street Lights (3 pack)

Use to light depots, rail yards, alley ways, sidings, parking lots and more. Includes extension poles to make the light poles taller for a broader reach. Wooden Pole Street Lights are compatible with the Just Plug® Lighting System. Use one Light Hub PORT per set. 20mA set

Dimensions - 1.071" w x 3.449" h (27.2 mm w x 87.6 mm h)
Dimensions with extension piece - 1.071" w x 5.516" h (27.2 mm w x 140.1 mm h)

This control box is for operating 4 turnouts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 74492 turnout mechanism. 4-conductor wire with plugs included for connecting several controllers.

We recommend item number 71054 for extending the cable connection between the turnout controller and the turnout mechanism.

This control box is for operating 4 double solenoid accessories with end shutoff contacts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 7549 turnout mechanism (K) or the 74490 turnout mechanism (C). The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This is a kit for converting C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from a 72752 turnout control box with a feedback function or from a turnout installation Decoder1. This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts.

Märklin System | Lighting Set for Coaches

Cold White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

Märklin System | Lighting Set for Coaches

Warm White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

This is an improved version of the 7549 turnout mechanism. This mechanism can be used with the 2265 and 2266 turnouts (new versions), the 22715 and 22716 turnouts, the 2275 double slip switch, and the KOMBI extension set program. The mechanism has an automatic end shutoff feature. Automatic feedback is possible with the 72710 control box. Below-baseboard mounting can be done with the 7548 installation kit.

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

In over 160 pages, you get extensive tips for building a layout including essential information about track geometry, layout control, and accessories. An ideal handbook for designing and building a modern track layout. In addition, there are numerous suggestions for updating existing layouts and taking them into the digital world. There are also 25 track plans for C and K Track included in this handbook.

This is a 10-pin to 7-pin adapter cable for connecting a the 60653 Mobile Station, the 60652 Mobile Station, and the 66950 Trix Mobile Station to the 60125 Terminal and a 3rd Mobile Station to the 60213-60215 Central Stations.

This cable can also be used to connect a second 60652 Mobile Station to the 24088 feeder track or to the 60115 Connector Box (H0) or 60111 Connector Box (Märklin 1).

This control box is for turning 4 different track or accessory circuits on and off. For example, power can be controlled in 4 storage sidings in 4 different track circuits. Unit comes with 8 sockets on the back. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This control box is for dividing a track or accessory circuit into 4 different circuits, each with two connections. For example, 4 storage sidings in the same track circuit or 4 users in the same accessory circuit can be turned on and off. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included.

Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

Ausführliche Beschreibung des Märklin-Digital-Systems. In diesem Buch erhält der Leser alle wesentlichen Infos zur Central Station 3 mit der Softwareversion 2.0: u.a. Steuern mit der Central Station 3, Umrüstung auf digitales Fahren, Tipps für automatisierte Abläufe. Umfang über 190 Seiten im Format Din A4. Ausführung in deutscher Sprache.

This control box is for operating 4 double solenoid accessories such as turnouts and signals or up to 8 uncoupler tracks. The position of the buttons shows the settings for accessories connected to the sockets for those buttons. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This book is an extensive description of the Märklin Digital system. It contains all of the essential information about the Central Station 3 with Software Version 2.0. Focal points are control with the Central Station 3, conversion to digital locomotive operation, tips for automated processes. 190 pages in the DIN A4 format. English language version.

Motor brushes for older style motors requiring one carbon and one copper brush. E600300 includes 10 pairs.

Märklin | HO scale (1:87) | lighting

Height 100 mm / 3-15/16".

Double Light commonly used on Station Platforms

Height 70 mm / 2-3/4"

This connector adapter is for connections from users such as lights to a switched mode power pack with a 4-pin mini DIN high current plug.

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.

This is a universal circuit board with two red LEDs for use with the new generation UIC-x and TEE cars in the Märklin H0 program (car length 28.2 cm / 11-1/8").

2 permanently attached connecting wires.

A 73400 lighting kit or, depending on the type of car, a 73404, 73405, or 73406 pickup shoe / ground spring power feed set is required to hook up the 73407 marker light kit

Märklin System | Lighting Set for Coaches

Soft Light - Lighting Kit: Universal circuit board with several LEDs, which will fit in most of the passenger cars in the Märklin H0 program. One 73400 is required for a short car (example: Langenschwalbach cars); for long cars (example: UIC-x at 28.2 cm / 11-1/8" length) two 73400 are required. The circuit boards can be plugged together in a series or they can be shortened.

Mounting hardware is included. The separate 73404, 73405 or 73406 pickup shoe / ground spring power feed set, or the 72020 current-conducting coupler with the 72050 ground spring is required, depending on the car type.

Märklin System | Lighting Set for Coaches

White Light Lighting Kit: Universal circuit board with several LEDs to fit in most of the passenger cars in the Märklin H0 program. One 73401 board is required for a short car (example: Langenschwalbach cars); two boards are required for long cars (example: UIC-x cars with a length of 28.2 cm / 11-1/8" length). Several of these circuit boards can be plugged together or a board can be shortened.

Mounting hardware is included. Depending on the car type, the separate pickup shoe / ground spring set, item nos. 73404, 73405 or 73406 or the 72020 current conducting couplers with the 72050 ground spring is required for electrical connections.

Close Coupler Heads for Standard Coupler Pockets, 10 Pieces

This new close coupler head is specially planned for newly designed locomotives with prototypically lower buffer beams and thereby lower buffer heights above the top edge of the rail (according to NEM 303). This is to ensure the required freedom of movement for the coupler system below the buffer plates. This new close coupler head is compatible with all available Märklin couplers.

10 Relex coupler heads. These couplers can be used on locomotives and cars with standard coupler pockets (NEM 362).

Relex Coupler - 10PK

This is a 50 milliliter or 1.67 oz. bottle for refilling all smoke generators. You can find information on hazard warnings and the safety data sheet under Instructions / Operating Manual.

Märklin System | Pickup Set for Coaches

This is a pickup set for the 73300 lighting kit for "Donnerbüchsen" / "Thunder Box" passenger cars based on 4313 / 4314 (coaches). A pickup shoe and a ground spring are included. Mounting hardware is included.

This product is a cooperative project with the firm Viessmann Model Technology, Inc

Märklin System | Pickup Set for Baggage Car

This is a pickup set for the 73300 lighting kit for "Donnerbüchsen" / "Thunder Box" passenger cars based on 4315 (baggage car). A pickup shoe and a ground spring are included. Mounting hardware is included.

This product is a cooperative project with the firm Viessmann Model Technology, Inc

2024 Märklin Main Catalogue - all scales - English Edition

he full line catalog as english edition comprises 388 pages in a format of approx. 29 x 21 cm. Full-colour, with very detailed pictures and a complete product description with all highlights and features, the extensive catalogue covers the entire Märklin programme.

Gauge H0 - Article No. 74990
Track Screws for Märklin and TRIX C-track

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.