Märklin accessories

Active filters

$24.00
In Stock

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

$36.65
In Stock

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

$24.00
There are not enough products in stock

This is a kit for converting C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from a 72752 turnout control box with a feedback function or from a turnout installation Decoder1. This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts.

$21.35
In Stock

This control box is for operating 4 double solenoid accessories such as turnouts and signals or up to 8 uncoupler tracks. The position of the buttons shows the settings for accessories connected to the sockets for those buttons. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

$26.80
In Stock

This control box is for operating 4 double solenoid accessories with end shutoff contacts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 7549 turnout mechanism (K) or the 74490 turnout mechanism (C). The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

$22.00
$26.99 -18.49%
In Stock

Woodland Scenics | HO scale (1:87) | lighting

Wooden Pole Street Lights (3 pack)

Use to light depots, rail yards, alley ways, sidings, parking lots and more. Includes extension poles to make the light poles taller for a broader reach. Wooden Pole Street Lights are compatible with the Just Plug® Lighting System. Use one Light Hub PORT per set. 20mA set

Dimensions - 1.071" w x 3.449" h (27.2 mm w x 87.6 mm h)
Dimensions with extension piece - 1.071" w x 5.516" h (27.2 mm w x 140.1 mm h)

$55.99
$69.99 -20%
In Stock

This switched mode power pack is for connecting to and supplying power to the Märklin 60114 or 60116 Track Box but suitable for many other applications requiring power compatible with this unit.

The input is 120 volts / 60 Hertz

The output 18 volts / 36 watts DC voltage. 

Dimensions 85 x 55 x 74 mm / 3-3/8" x 2-1/8" x 2-7/8".

Connections: Hollow socket 5.5/2.5 mm, positive conductor inside.

The switched mode power pack is authorized for use as a toy and comes in a plastic housing. The 66367 switched mode power pack is designed for use only indoors.

$21.00
$23.99 -12.46%
In Stock

In over 160 pages, you get extensive tips for building a layout including essential information about track geometry, layout control, and accessories. An ideal handbook for designing and building a modern track layout. In addition, there are numerous suggestions for updating existing layouts and taking them into the digital world. There are also 25 track plans for C and K Track included in this handbook.

$14.00
$14.49 -3.38%
Temporarily not in stock (email ishop@hobbytech for availability)

Close Coupler Heads for Standard Coupler Pockets, 10 Pieces

This new close coupler head is specially planned for newly designed locomotives with prototypically lower buffer beams and thereby lower buffer heights above the top edge of the rail (according to NEM 303). This is to ensure the required freedom of movement for the coupler system below the buffer plates. This new close coupler head is compatible with all available Märklin couplers.

$18.50
$20.99 -11.86%
There are not enough products in stock

This book is an extensive description of the Märklin Digital system. It contains all of the essential information about the Central Station 3 with Software Version 2.0. Focal points are control with the Central Station 3, conversion to digital locomotive operation, tips for automated processes. 190 pages in the DIN A4 format. English language version.

$50.00
$57.99 -13.78%
Special Order (email us for availability)

This is a set for installation in a locomotive and comes with a controlled digital decoder and a powerful motor (conversion kit). It will fit into most Märklin H0 locomotives with drum-style commutator motors. The decoder has 80 programmable addresses, automatic switching between the modes of operation, a load compensation feature, and a digitally controlled connection for headlights / marker lights that change over with the direction of travel. The acceleration and braking delay can be controlled with a 6021 Control Unit or with Märklin Digital. The motor has a 5-pole armature, a powerful permanent magnet field, and a pre-installed bearing plate. Installation hardware is included.

Decoder dimensions 25 x 17 x 6 mm / 1" x 11/16" x 1/4".

$10.39
$11.99 -13.33%
There are not enough products in stock

Märklin System | Pickup Set for Baggage Car

This is a pickup set for the 73300 lighting kit for "Donnerbüchsen" / "Thunder Box" passenger cars based on 4315 (baggage car). A pickup shoe and a ground spring are included. Mounting hardware is included.

This product is a cooperative project with the firm Viessmann Model Technology, Inc