ESU 59622 LokPilot 5 DCC, PLUX22 NEM658, gauge H0 ,0
Reduced price

ESU 59622 LokPilot 5 DCC, PLUX22 NEM658, gauge H0 ,0

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

$33.20 $36.90 -10.03%
Currency selector Upper-Right Corner: $=USD, CA$=CAD
 In Stock
 

In the event of a warranty issue, we will assist with your claim to respective manufacturer.

 

We ship world wide with Canada Post. Cost will be provided at checkout. Free pick-up in store.

 

Store Policy: All sales are final. We do not take any item in return or exchange for any reason.

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a benefit; cheaper price.

LokPilot 5 decoders are offered with all common interfaces. 

Modes

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist.

The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltage is possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two train stations.

The LokPilot 5 DCC decoder can be used on analog DC trains. The top speed can be set separately.

The decoder switches between the operating modes fully automatically "on-the-fly".

Features

We know that you want your locomotives to operate as realistic as possible. Therefore we have the LokPilot 5 DCC packed with function outputs. Depending on the interface version, each LokPilot 5 DCC Decoder offers  at least 10 amplified function outputs with 250mA output current each. The PluX22 or 21MTC decoder interface have additional 4 outputs for logical commands or servos. All-important lighting functions are available. The brightness of each output can be set separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.

Motor control

The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors. Operation - The typical “hum”  is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique "Auto-tune" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.

Operational safety

Oprional, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.

Protection

Of course, all function outputs and the motor output are protected against overload.

We want you to enjoy your decoder for as long as possible.

ESU
59622
New product
16 cm
13 cm
2 cm
0.06 kg
3 Items