Shipping Policy

PIKO (HO-scale) Article no. 55419
Box of 6 Roadbed A-Track

A-Track with Roadbed, Curved Track, R9/15°

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO | HO (1:87) | A-track Code 100 with Roadbed

WL turnout, left, angle 15°, straight track = G239,branch = R9, manual operation with positioning.

PIKO A" track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme. 

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

WR turnout, right, angle 15°, straight track = G239,branch = R9, manual operation with positioning.

PIKO A" track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme. 

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

BWL curved turnout, left, R2 to R3, radius of the main or branch track R2. Manual operation with positioning

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

BWR curved turnout, right., R2 to R3, radius of the main or branch track R2. Manual operation with positioning.

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

Double Slip Switch DKW. Manual operation with positioning

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

Three-way turnout with 15° branches each (W3). Manual operation with positioning.

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

WY Y turnout (WY). Manual operation with positioning.

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

BWL curved turnout, left, R3 to R4 or R4 to R5, radius of the main or branch track R3. Manual operation with positioning

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

BWL curved turnout, right, R3 to R4 or R4 to R5, radius of the main or branch track R3. Manual operation with positioning

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

Turnout motor: 55271 (sold separately)

PIKO | HO (1:87) | A-track Code 100 with Roadbed

Crossing 15° (K15)

PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.

PIKO | HO scale (1:87) | A-track with Roadbed

Roadbed for left and right turnout drive (mechanism)

PIKO A Track bedding base for turnout mechanisms, with realistic stone structure. Can be plugged into the embankment of turnouts on the left (55420) and right (55421)

PIKO | HO scale (1:87) | A-track with Roadbed

Roadbed for left curved turnout drive (mechanism)

PIKO A Track ballast base for turnout mechanisms, with realistic stone structure. Can be plugged onto the embankment of curved left turnouts (55422).

PIKO | HO scale (1:87) | A-track with Roadbed

Roadbed for right curved turnout drive (mechanism)

PIKO A Track ballast base for turnout mechanisms, with realistic stone structure. Can be plugged onto the embankment of curved left turnouts (55423).

PIKO | HO scale (1:87) | A-track with Roadbed

Roadbed end piece

PIKO A Track Bedding Base Track Slope End Pieces. These can be plugged onto PIKO A-track with bedding as ends. Length: 2 cm, width: 4.3 cm.

PIKO | HO scale (1:87) | A-track with Roadbed

Roadbed end piece

PIKO A Track Bedding Base Track Slope End Pieces. These can be plugged onto PIKO A-track with bedding as ends. Length: 2 cm, width: 4.3 cm.

PIKO | HO scale (1:87) | A-track with Roadbed

Roadbed Socket for Connection clip

PIKO A Track bedding base for connection clip. With realistic stone structure. Can be used as a base for the 55270 connection clips for analog layouts or 55275 for digital layouts on PIKO A Track with 55406 ballast.

PIKO | HO scale (1:87) | A-track with Roadbed | Code 100

Track screws for roadbed 50 pcs.

Fastening screw for track bedding approx. 50 pieces. Fix the PIKO A-tracks in the bedding.

PIKO | HO scale (1:87) | A-track with Roadbed | Code 100

Track Screws Approx. 400 pcs.

Track screws 1.4 x 18 mm for track bedding approx. 400 pieces. Track fastening screws with sufficient length for the PIKO A track with bedding.

This set is the ideal way to start out in Digital Control (DCC and mfx). It includes a Trix Mobile Station control system which is easy to use in both DCC and mfx. If you are using locomotives with mfx protocol the controller will automatically recognize and load the profile of the locomotive (Name, Class, Icon, Address, Function buttons and more). All you need to do is place the locomotive on the track. In DCC mode you have full control of the CVs and can build and store your own locomotive profile. Up to 40 profiles can be stored for direct access.

This set can be expanded with the Trix C Track extension sets and with the entire Trix C Track program

Code 83: The rail profile is 2.1 mm / 0.083" high

Trix H0 C-track - Article No. 62001
Straight Track

Snap-in end piece for the Trix C Track roadbed. For the end of a train line, sidings, display bases, and display cases. Length 16.5 mm / 5/8". 10 pieces in a package.

Trix H0 C-track - Article No. 62064
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 64.3 mm / 2-9/16". This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings

Trix H0 C-track - Article No. 62071
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 70.8 mm / 2-13/16". Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.

Trix H0 C-track - Article No. 62077
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 77.5 mm / 3-1/16"

Trix H0 C-track - Article No. 62094
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 94.2 mm / 3-3/4"

Trix H0 C-track - Article No. 62107
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 360 mm / 14-3/16", curve 7.5°

Trix H0 C-track - Article No. 62115
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 360 mm / 14-3/16", curve 15°

Trix H0 C-track - Article No. 62130
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 360 mm / 14-3/16", curve 30°

Trix H0 C-track - Article No. 62172
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 171.7 mm / 6-3/4"

Trix H0 C-track - Article No. 62188
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 188.3 mm / 7-3/8"

Trix H0 C-track - Article No. 62206
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 437.5 mm / 17-1/4", curve 5.7°. Extends turnout branch curves (62611 and 62612) to 30°

Trix H0 C-track - Article No. 62207
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 437.5 mm / 17-1/4", curve 7.5°

Trix H0 C-track - Article No. 62215
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 437.5 mm / 17-1/4", curve 15°

Trix H0 C-track - Article No. 62224
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 437.5 mm / 17-1/4", curve 24.3°. Same as turnout branch (62611 and 62612). This track piece will offset the curve on the turnout to parallel your track.

Trix H0 C-track - Article No. 62229
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 229.3 mm / 9". Serves as the complement to the length of the complementary curve on the wide radius turnouts and wide angle crossings.

Trix H0 C-track - Article No. 62230
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 437.5 mm / 17-1/4", curve 30°.

Trix H0 C-track - Article No. 62236
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 236.1 mm / 9-5/16". This track is the same length as the length of the wide radius turnouts.

Trix H0 C-track - Article No. 62315
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius R3 = 515 mm / 20-1/4" / 15°. Removable roadbed slopes. This track section is required on both branches of the 62771 and 62772 wide radius curved turnouts.

Trix H0 C-track - Article No. 62330
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 515 mm / 20-1/4", curve 30°

Trix H0 C-track - Article No. 62430
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius R4 = 579.3 mm / 22-13/16"

Trix H0 C-track - Article No. 62530
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius R5 = 643.6 mm / 25-5/16"

TRIX C-track HO Code 83
Left Turnout
Length 188.3 mm / 7-3/8", curve 24.3°, radius 437.5 mm / 17-1/4" (R2).

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

TRIX C-track HO Code 83
Right Turnout
Length 188.3 mm / 7-3/8", curve 24.3°, radius 437.5 mm / 17-1/4" (R2).

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

Length 188.3 mm / 7-3/8", crossing angle = 24.3° curve, radius 437.5 mm / 17-1/4" (R2).
Code 83: The rail profile is 2.1 mm / 0.083" high

The double slip switch comes with a manual hand lever, an electric mechanism and a lighted turnout lantern. A turnout decoder can be retrofitted. The double slip switch can be used for left or right installation. The setting for the branch or straight is well-defined. Built-in electric turnout motor and lantern.

TRIX C-track HO Code 83
Left Turnout
Inner curve 30°, radius 360 mm / 14-3/16" (R1). Outer curve 30° in the parallel curve spacing of 77.5 mm / 3-1/16"

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

TRIX C-track HO Code 83
Right Turnout
Inner curve 30°, radius 360 mm / 14-3/16" (R1). Outer curve 30° in the parallel curve spacing of 77.5 mm / 3-1/16"

Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.

Length 236.1 mm / 9-5/16".
Branch track radius 1,114.6 mm / 43-7/8".
Turnout curve 12.1°.
10° metal frog, can be polarized.

Two (2) no. 62071 track sections are required at the end of the turnout. A roadbed piece to fit is included. A hand lever is included.

The 62912 curved track (radius 1,114.6 mm, 12.1°) is required to offset and parallel the branch track.

The 62229 straight track (229.3 mm) is required to offset the length of 62912 on the main track.

Length 236.1 mm / 9-5/16".
Branch track radius 1,114.6 mm / 43-7/8".
Turnout curve 12.1°.
10° metal frog, can be polarized.

Two (2) no. 62071 track sections are required at the end of the turnout. A roadbed piece to fit is included. A hand lever is included.

The 62912 curved track (radius 1,114.6 mm, 12.1°) is required to offset and parallel the branch track.

The 62229 straight track (229.3 mm) is required to offset the length of 62912 on the main track.

Trix H0 Code 83 - Article No. 62771
Left Wide Radius Curved Turnout

A long-standing wish of Trix fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Trix is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions

Inner curve: R3 = 515 mm / 20-1/4" / 30°.
Outer curve: 30° with a parallel curve spacing of 64 mm / 2-1/16".

Hand lever included.
Two (2) each 62315 track are required on the inner and outer curve of the turnout. A roadbed piece to fit here is included with the 62315.
The frog is metal and can be polarized.
The 74491 electric turnout mechanism, the 74462 digital decoder, and the 74470 turnout lanterns can be installed on this turnout.

Trix H0 Code 83 - Article No. 62772
Right Wide Radius Curved Turnout

A long-standing wish of Trix fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Trix is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions

Inner curve: R3 = 515 mm / 20-1/4" / 30°.
Outer curve: 30° with a parallel curve spacing of 64 mm / 2-1/16".

Hand lever included.
Two (2) each 62315 track are required on the inner and outer curve of the turnout. A roadbed piece to fit here is included with the 62315.
The frog is metal and can be polarized.
The 74491 electric turnout mechanism, the 74462 digital decoder, and the 74470 turnout lanterns can be installed on this turnout.

TRIX H0 Code 83 - Article No. 62900

C Track - Large Track Extension Set

This track extension set can be used to expand the track layout for all starter sets. It can be used for parallel track connections, passing sidings, a storage siding, and new routes. This track extension set is suitable for TRIX starter sets as well as for existing layouts. It can be expanded with the entire C Track program.

If you already have a "two-rail" layout, you can benefit from Trix C Track: Use this elegant roadbed track for any expansion. You use the adapter track (62951) for the transitions in the existing area. It allows connections between Trix C Track and conventional Code 83 track.

TRIX H0 Code 83 - Article No. 62902

C Track - C2 Extension Set - passing siding

For expanding the basic oval C Track starter set or any lay-out in need to include a passing siding.

TRIX H0 Code 83 - Article No. 62903

C Track - C3 Extension Set - passing siding with curved turnouts

For expanding the basic oval C Track starter set or any lay-out in need to include a passing siding utilizing curved turnouts to optimize available real-estate.

You may further expand your lay-out utilizing suitable pieces from the TRIX C-track assortment

Trix H0 C-track - Article No. 62912
Curved Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Radius 1114.6 mm / 43-7/8". Curve 12.1°

Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.

This curve is used to offset the curve on the 62711 and 62712 Wide Radius Turnouts so that the branch will parallel with the main line. The 62071 is also required as a wedge piece between the turnout and the 62912.

Trix H0 C-track - Article No. 62922
Straight Track - Adapter Track from Fleishmann Profi Track (Code 100)
Code 83: The rail profile is 2.1 mm / 0.083" high (TRIX C-Track)

Length 180 mm / 7-7/8"

This track enables the transition from the FLEISCHMANN* Profi Track System to the Trix C Track: Code 100 to TRIX C-track Code 83

*FLEISCHMANN is a brand of Modelleisenbahn München, Inc.

Trix H0 C-track - Article No. 62977
Straight Track - Track End with a Bumpter
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 80.5 mm / 3-3/16"

A frame with a buffer beam comes mounted on the track. The rails end in the roadbed.

Trix H0 C-track - Article No. 62997
Straight Track - Uncoupler Track
Code 83: The rail profile is 2.1 mm / 0.083" high

Length 94.2 mm / 3-3/4"

The uncoupler track comes with a manual hand lever and a built-in electric mechanism. It is compatible with most common European coupler systems. It can be used with all NEM couplers and with current close coupler systems. A light mast can be plugged into the uncoupler track as an uncoupler signal (Märklin 74997). The uncoupler track can be connected to a control box or to a digital decoder

Trix H0 - Article No. 62997
Locomotive Wheel Cleaning Brush

This brush is for cleaning locomotive wheels. Clean wheels help prevent television/radio interference. This brush is also useful for cleaning track. The brush can be lengthened by connecting several brushes together.

TRIX H0 Code 83 - Article No. 66861

C Track - Turntable

This is a DB standard design 23 meter / 74 foot 9 inch turntable. It is designed for conventional and digital locomotive operation. The remote controlled deck has a built-in motor. It can only be controlled digitally with the Mobile Station 2 and Central-Station 2 and 3 (not included). Control with the Central-Station 2 and 3 is especially easy by means of track indexing (after carrying out an update), or with different digital central controllers that use the DCC digital format. 

WalthersContols® | HO-scale | Track Accessories

Manual Uncoupler: Perfect for yards, sidings or main lines. Magnet rotates to avoid accidental uncoupling. Complete instructions, drilling jig, trackside marker and control knob all included. Easily installed in new or existing Code 83 or 100 track. Works with most magnetic knuckle couplers

Tools Needed (sold separately): 5/32" 3.9mm Drill Bit 1/16" 1.5mm Drill Bit

Vertical-Mount Switch Machine
Walthers Part # 942-101
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Horizontal-Mount Switch Machine
Walthers Part # 942-102
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Full Instructions
 
See the entire system!

Walthers Layout Control System

Distribution Block
Walthers Part # 942-111

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Download the Instruction Sheet (94 K bytes, PDF format)

Connecting Cable pkg(5) Socket - Socket

WALTHERS Part # 942-112

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System

Extension Cable, Plug - Socket, Length: 48" 122cm pkg(5)
Walthers Part # 942-113

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.

Walthers Layout Control System | all scales

Dual LED Fascia Turnout Controller (yellow-green)

Walthers Part # 942-121

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Dual-Color LED Fascia Crossover Controller - Yellow - Green

Walthers Part # 942-122
A scale

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Walthers Layout Control System | all scales

Dual Color LED Accessory Fascia Controller (yellow-green)

Walthers Part # 942-123

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System | all scales

Dual Color LED Accessory Fascia Controller (red-green)

Walthers Part # 942-124

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.

Walthers Layout Control System

Turnout Drill Set
Walthers Part # 942-140

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. 

Download the Instruction Sheet (94 K bytes, PDF format)

Edge Connector for Tortoise(R) Switch Machine pkg(2)
Walthers Part # 942-142
A scale

 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 
 

Walthers Layout Control System | all scales

Edge Connector for Tortoise® Switch Machine w/Green PC Board pkg(2)

Walthers Part # 942-123

PLEASE NOTE - this Edge Connector is designed for use with Tortoise™ switch machines manufactured after May/June 2020 that feature a green 1-3/8" (35mm) wide PC board.

Two-Color LED Fascia Indicator (Yellow-Green)

Walthers Part # 942-151
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Red - Green
Walthers Part # 942-152
A scale
 
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. 

Walthers Layout Control System | all scales

Single Color LED Fascia Indicator - Green

Walthers Part # 942-154

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.