DCC controllers

Active filters

$87.78
$99.90 -12.13%
There are not enough products in stock

The ECoS (ESU Command Station) is so powerful and capable that many model railroaders would like to replace their present digital station with an ECoS. It is now possible to connect your controllers like Digitrax® and Uhlenbrock® handheld throttles directly to the ECoS, thanks to the ESU L.Net Converter. Additionally, you can continue to use your feedback devices which support the well-known Loconet® communication protocol

$288.88
$339.99 -15.03%
Special Order (email us for availability)

Mobile Control II Remote Control single Handset for ECoS, german / english. With lanyard and USB-cable

The Mobile Control II applies the WLAN standard for communicating with the ECoS. The Mobile Control II can control all locomotives registered in the ECoS. All important locomotive properties such as name, symbol, function mapping as well as symbols for function buttons will be taken from the ECoS and will be displayed correctly. All accessories and routes displayed on the control panel of the ECoS can be switched. Of course the differentiation between double, treble and quadruple aspects will remain fully intact and displayed with the correct symbol on the display.

 

$728.88
$899.00 -18.92%
NEW ITEM - RELEASE PENDING

ORDER NOW - and get an EXTRA 5% Advance Order Discount - (deducted from the price below)

ESU 50220 ECoS 2.5 - ESU Command Station
6A, 7" TFT colour display - 120V

The ECoS 50220 is already the second generation of our successful ECoS command station. With the latestECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.

$417.77
$499.90 -16.43%
Special Order (email us for availability)

The new ESU CabControl is a complete DCC system which allow you wireless control of your locomotives, accessories and routes. This system use a handheld with Android operating technology interfaced to your lay-out through wireless LAN. Power supply and a smart technology connector box is all included so you can operate your trains as soon as you hook it up to your layout (assuming that you already have DCC or DCC/sound equipped locomotives).

$799.99
$880.00 -9.09%
special order / email ishop@hobbytech.ca for availability

As a multi-protocol controller, the Central Station 3 plus with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories. The Central Station Plus has a built-in s88 connection

NOTE: The power supply is not included.
You may need to get the 60045 switched mode power pack.

$664.44
$710.00 -6.42%
Special Order (email us at ishop@hobbytech.ca)

As a multi-protocol controller, the Central Station 3 with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories.

NOTE: The power supply is not included. You may need to get the 60045 switched mode power pack.

$103.33
In Stock

This is a digital hand control unit (mfx and DCC). 11 locomotives can be controlled with direct access by selecting locomotive profiles stored in a quick access list. These profiles can be built manually (DCC or mfx digital address, locomotive icons and various function icons), by accessing built-in Märklin Digital locomotive database, or automatically for locomotives with digital decoders in the mfx format. 

Note: The Mobile Station need to be connected to a Connector Box (sold separately): 60116 or 60113 for HO or N-scale or the 60112 for 1 Gauge. The Connector Box will need a power supply like the 66367 (sold separately). The connector box is then supplying both power and digital signals to your track and accessories by two wires.

$419.99
$532.99 -21.2%
In Stock

Wireless Operating Enjoyment
The MS WLAN feature an interactive display and a newly designed control knob

This complete 4-pack set consist off:
- 60667 Mobile Station WLAN
- 60116 Digital Connector Box
- 60117 WLAN Receiver Box
- 66367 Switched Mode Power Pack, 120 Volts

Operate your layout wirelessly with one hand by using the Mobile Station WLAN!

NOTE: All components can be bought separately.

$117.77
$137.99 -14.65%
Special Order (email us at ishop@hobbytech.ca)

The 55016 PIKO SmartController Light includes the SmartController Light remote and cable.  The central station is NOT included in the purchase of this SmartController Light.  The digital central station for HO-, N-, and TT-Scales is offered in the 55017 SmartControl Light Basic Set.

The 55016 SmartController is an add-on remote, exactly the same as the SmartController Light in the 55017 Basic Set, so additional users can all enjoy SmartControl Light together.  

$155.55
$209.99 -25.93%
There are not enough products in stock

Top features of PIKO SmartControl Light…

  • SmartControl Light is an affordable and easy-to-use digital system
  • Fully NMRA-DCC compatible.  Works with all brands of DCC decoders.
  • Maximum output of 2 Amps.
  • Operation is and easy and intuitive.
  • Control and store up to 9,999 locomotives with up to 24 functions per loco
  • One built-in reversing loop output.
  • Control up to 20 locos at a time!

$219.99
$259.99 -15.39%
In Stock

PIKO | Digital Command Control system | HO, TT, N scale

PIKO SmartControl WLAN (wireless DCC controller)
The ideal, low-priced entry into the digital world of model railways! Run several locomotives at the same time. The PIKO SmartControl WLAN has a max. output current of 2 A. If the layout grows, it is possible to add suitable boosters. PIKO SmartControlWLAN has full DCC compatibility.

The all-new PIKO SmartControlWLAN Digital Command Control system, an innovative, user-friendly, and above all sustainable DCC system developed completely in-house for the needs of the average DC model railroader 

$188.88
$210.00 -10.06%
In Stock

This set is the ideal way to start out in Digital Control (DCC and mfx). It includes a Trix Mobile Station control system which is easy to use in both DCC and mfx. If you are using locomotives with mfx protocol the controller will automatically recognize and load the profile of the locomotive (Name, Class, Icon, Address, Function buttons and more). All you need to do is place the locomotive on the track. In DCC mode you have full control of the CVs and can build and store your own locomotive profile. Up to 40 profiles can be stored for direct access.

This set can be expanded with the Trix C Track extension sets and with the entire Trix C Track program

Code 83: The rail profile is 2.1 mm / 0.083" high