Shipping Policy

KATO | HO (1:87) | Unitrack 

World's Greatest Hobby Track Pack (WHG)
Unitrack starter set -- For a 4 x 8' Layout

HO Unitrack WGH Plan Set
Creates an exciting 4x8' Layout with turnouts, bumpers, and sidings that is a perfect stepping stone for a more complex beginning layout. Uses 19 1/4" Radius Curves (490mm).

Enjoy DC and DCC!
KATO HO Track Sets are only the beginning of your HO scale UNITRACK layout! Experience the snap-together reliability and convenience of UNITRACK while enjoying the realistic appearance and texture of the molded roadbed.

NOTE: Controller not included. Add your preferred DC or DCC controller. See below.

4-1/2 x 7-3/4' Setup Size - 26-3/8" 67cm Radius Curves
Walthers Part # 381-3105

Creates a basic oval made from 26 3/8" radius curves and includes both a rerailer and a Kato Power pack for an out-of-the-box operating track set. Just add locomotives and cars! The track is also just as suitable for a DCC controller and DCC locomotives whenever you are ready to migrate to DCC operations (Digital Command Control).

28-3/4" 73cm Radius Curves (Outer Loop for HM1 Set #381-3104)
Walthers Part # 381-3111
HO scale

HO HV1 R730mm Outer Track Oval
Creates a basic oval made from 28 3/4" radius curves that can fit around (and run parallel to) the HM1. Includes a basic track oval and a track feeder for supplying power from a Kato Power Pack.

Walthers Part # 381-3112
HO scale

 
HV2 Passing siding track set with #6 manual turnout
This track assortment consists of the necessary track sections to form a complete passing siding (approximately 5 2/3 feet long) made using #6 manual turnouts.

Remote Control #4 Turnouts
Walthers Part # 381-3113
HO scale

 
HV3 Interchange track set with #4 Electric Turnouts
This track assortment provides a crossover space for transitioning between two parallel tracks using #4 electric turnouts. Includes the necessary track sections as well as a #24-827 3-way extension cord and a turnout control switch.

Walthers Part # 381-3114
HO scale

HV4 Interchange track set with #6 Electric Turnouts
This track assortment provides a crossover space for transitioning between two parallel tracks using #6 electric turnouts. Includes the necessary track sections as well as a #24-827 3-way extension cord and a turnout control switch.

84 x 45" (212.6cm x 114.2cm)
Walthers Part # 381-3115
HO scale

The HV5 (previously the 3-102 basic track oval) creates a basic oval made from 21 5/8" track to fit within a 4'x8' space and includes a rerailer accessory, feeder track and power adapter cord to allow you to build a basic oval layout that can easily be powered and expanded upon.

DC or DCC: This HO Track Set is only the beginning of your HO scale UNITRACK layout! Experience the snap-together reliability and convenience of UNITRACK while enjoying the realistic appearance and texture of the molded roadbed. Each set can be used as packaged for the simplest of temporary single-track operation, or they can be combined with additional UNITRACK sections and turnouts to create a larger and more elaborate configuration. 

Amtrak P42 Superliner Starter Set - Standard DC

Amtrak #100 (50th Blue)

Amtrak P42 Superliner Starter Sets from Kato are a great start for beginners in HO Scale who want reliable trains and easy track assembly. Each set includes a GE P42 diesel, Viewliner Baggage Car, a Superliner Lounge and a Superliner Coach, plus the HM1 HO Unitrack Starter Kit which includes a 7'8" x 4'6-3/4" oval of Kato Unitrack, rerailer and Kato Power Pack SX with wall transformer, all designed for years of reliable operation and plenty of fun! Locomotives in the new sets are available in several of Amtrak's schemes.

Amtrak P42 Superliner Starter Set - Standard DC

Amtrak #161 (Phase I scheme)
2 Superliners, Unitrack Oval
Viewliner Baggage
Unitrack Oval

Amtrak P42 Superliner Starter Sets from Kato are a great start for beginners in HO Scale who want reliable trains and easy track assembly. Each set includes a GE P42 diesel, Viewliner Baggage Car, a Superliner Lounge and a Superliner Coach, plus the HM1 HO Unitrack Starter Kit which includes a 7'8" x 4'6-3/4" oval of Kato Unitrack, rerailer and Kato Power Pack SX with wall transformer, all designed for years of reliable operation and plenty of fun! Locomotives in the new sets are available in several of Amtrak's schemes.

Amtrak P42 Superliner Starter Set - Standard DC

Amtrak #108 (Phase VI scheme)
2 Superliners, Unitrack Oval
Viewliner Baggage
Unitrack Oval

Amtrak P42 Superliner Starter Sets from Kato are a great start for beginners in HO Scale who want reliable trains and easy track assembly. Each set includes a GE P42 diesel, Viewliner Baggage Car, a Superliner Lounge and a Superliner Coach, plus the HM1 HO Unitrack Starter Kit which includes a 7'8" x 4'6-3/4" oval of Kato Unitrack, rerailer and Kato Power Pack SX with wall transformer, all designed for years of reliable operation and plenty of fun! Locomotives in the new sets are available in several of Amtrak's schemes.

Amtrak P42 Superliner Starter Set - Standard DC

Amtrak P42 #160 (50th Phase III)

Amtrak P42 Superliner Starter Sets from Kato are a great start for beginners in HO Scale who want reliable trains and easy track assembly. Each set includes a GE P42 diesel, Viewliner Baggage Car, a Superliner Lounge and a Superliner Coach, plus the HM1 HO Unitrack Starter Kit which includes a 7'8" x 4'6-3/4" oval of Kato Unitrack, rerailer and Kato Power Pack SX with wall transformer, all designed for years of reliable operation and plenty of fun! Locomotives in the new sets are available in several of Amtrak's schemes.

Amtrak P42 Superliner Starter Set - Standard DC

Amtrak #... (Phase V scheme)
2 Superliners, Unitrack Oval
Viewliner Baggage
Unitrack Oval

Amtrak P42 Superliner Starter Sets from Kato are a great start for beginners in HO Scale who want reliable trains and easy track assembly. Each set includes a GE P42 diesel, Viewliner Baggage Car, a Superliner Lounge and a Superliner Coach, plus the HM1 HO Unitrack Starter Kit which includes a 7'8" x 4'6-3/4" oval of Kato Unitrack, rerailer and Kato Power Pack SX with wall transformer, all designed for years of reliable operation and plenty of fun! Locomotives in the new sets are available in several of Amtrak's schemes.

Amtrak P42 Superliner Starter Set - Standard DC

Amtrak #203 (Lifesaver)
2 Superliners, Unitrack Oval
Viewliner Baggage
Unitrack Oval

Amtrak P42 Superliner Starter Sets from Kato are a great start for beginners in HO Scale who want reliable trains and easy track assembly. Each set includes a GE P42 diesel, Viewliner Baggage Car, a Superliner Lounge and a Superliner Coach, plus the HM1 HO Unitrack Starter Kit which includes a 7'8" x 4'6-3/4" oval of Kato Unitrack, rerailer and Kato Power Pack SX with wall transformer, all designed for years of reliable operation and plenty of fun! Locomotives in the new sets are available in several of Amtrak's schemes.

KATO | N scale (1:160) | vehicles

Volvo VN780 Tractor w/40' Corrugated Container on Chassis
--White Tractor w/CAI International Container (Red)

KATO | N scale (1:160) | vehicles

Yard Tractor w/40' Container & Chassis

KATO | N scale (1:160) | vehicles

Yard Tractor w/40' Container & Chassis
w/40' Cosco Container

KATO - EMD SD40-2 Diesel Locomotive #5904 - Canadian Pacific - Standard DC - 37-2906

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Tram Feeder Power Cable | Kato

Article No. 44-847 - N-Gauge
MSRP $8.00 USD

53' Intermodal Container 2-Pack
Canadian National (white, balck, green, We Deliver Slogan)

KATO | N-scale (1:160) | containers

40' Corrugated Container
Mediterranean Shipping MSC (yellow, black)
2-pack, magnetic and stackable

KATO | N-scale (1:160) | containers

40' Corrugated Container
Safmarine (blue, white, red)
2-pack, magnetic and stackable

Residential Building, 909 Jefferson Street | Kato

Article No. 23-404A Building - N scale
MSRP $30.00 USD

DioTown Broadcasting Building | Kato

Article No. 23-436 Building - N scale
MSRP $60.50 USD

DioTown Broadcasting Building, Green | Kato

Article No. 23-436B Building - N scale
MSRP $60.50 USD

DioTown 5th Avenue Building  | Kato

Article No. 23-437 Building - N scale
MSRP $60.50 USD

DioTown Corporate Office Building | Kato

Article No. 23-439 Building - N scale
MSRP $60.50 USD

Local Post Office | Kato

Article No. 23-454 Building - N scale
MSRP $38.00 USD

DioTown 2 Story Building, Fruit Shop | Kato

Article No. 23-475 Building - N scale
MSRP $29.00 USD

Suburban Island Platform Type B Kit | Kato

Article No. 23-108 Building - N scale
MSRP $19.00 USD

Overhead Transit Station Expansion Set | Kato

Article No. 23-123 Building - N scale
MSRP $37.00 USD

Suburban Overhead Stairway | Kato

Article No. 23-234 Building - N scale
MSRP $32.00 USD

Automatic 3 Color Signal, Straight Track 124mm | Kato

Article No. 20-605 DC Addon - N scale

KATO | N-scale (1:160) | Unitrack

Automatic 3 Color Signal SX
with 2-1/2" 64mm Straight - Left-Handed

Pier Raising Kit with Trapezoid Shape, 5 pcs | Kato

Article No. 23-068 Unitrack Accessory - N scale
MSRP $13.00 USD

No. 5 Single Track Piers with Trapezoid Shape 50mm, 5 pcs | Kato

Article No. 23-069 Unitrack Accessory - N scale

Unitrack Viaduct Station Set Kit | Kato

Article No. 23-125 Building Set - N scale
MSRP $148.00 USD

Unitrack Viaduct Station Stores Kit | Kato

Article No. 23-231 Building Set - N scale
MSRP $59.00 USD

Unitrack Viaduct Platform Extension Set | Kato

Article No. 23-232 Building Set - N scale
MSRP $39.00 USD

KATO | N-scale (1:160) | structures

North American Suburban Station -- Kit
9-11/16 x 3" 24.6 x 7.6cm

Features pre-painted parts including pre-mortared brick details plus an assortment of different commuter and Amtrak stickers.

The kit is manufactured by Faller (Germany)

Labelle Industries 1001 (A) Oiler Starter Set Assortment
Walthers Part # 430-1001

Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For HO, O, S, On30, Lionel, LGB and all larger size trains. Comes with 7-1/2" extension needle adapter for those hard-to-reach places..

Labelle Industries 1002 (A) Oiler Starter Set Assortment
Walthers Part # 430-1002

Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For small HO engines, N and Z Scales. Comes with 7-1/2" extension needle adapter for those hard-to-reach places.

Wheel blocks are used to keep cars in place on grades and on sidings and keep them from rolling away.

A package has 12 piece

You can enlarge your LGB starter set circle into an oval with a siding for switching operations and train storage. The sturdy storage box includes: 1 - 12000 manual right-hand switch, 6 - 10000 straight track sections, 1 - 11000 curved track section, 1 - track bumper.

You can enlarge your LGB starter set circle into an oval with a passing track. Two trains can pass, one train can park, cars can be switched or a locomotive can be moved from one end of the train to the other. 

The Christmas car for 2021 is imprinted with a wonderful theme. Naturally, the model also has doors that can be opened and it is a seamless addition to the previous series of LGB Christmas cars. The car has metal solid wheelsets. Length over the buffers 30 cm / 11-13/16".

The Christmas Car for 2023 is extensively imprinted with a wonderful theme. Naturally, this model has doors, which can be opened, and it is a seamless addition to the previous series of LGB Christmas cars. The car has metal solid wheelsets.

Length over the buffers 30 cm / 11-13/16".

The Christmas Car for 2025 is extensively imprinted with a marvelous theme. This model naturally also has doors that can be opened, and it is a seamless addition to the previous series of LGB Christmas Cars. This car has solid metal wheelsets.

Length over the buffers 30 cm / 11-13/16".

This is a model of a CP Rail (Canadian Pacific Railroad) covered hopper car. It is prototypically painted and lettered for Era V. The car has many separately applied details, roof hatches, and unloading hatches that can be opened. The car has metal wheel sets.

Length over the couplers 54 cm / 21-1/4".

This is a model of a CP Rail (Canadian Pacific Railroad) covered hopper car. It is prototypically painted and lettered for Era V. The car has a different car number from that for item number 43821. The car has many separately applied details, and roof hatches and unloading hatches that can be opened. The car has metal wheel sets.

Length over the couplers 54 cm / 21-1/4".

This is a model of an SP (Southern Pacific Railroad) boxcar. It is prototypically painted and lettered for Era III. The car has many separately applied details and sliding doors on the sides that can be opened. It also has metal wheel sets.

Length over the couplers 42 cm / 16-1/2".

This extension set for the construction site train contains another dump car, a power shovel with a manually movable shovel, a toy figure, and a number of accessories typical for a construction site such as barriers or signs. The stickers included with this set can be used to decorate the dump car. Length of the dump car 17 cm / 6-11/16".

This extension set is ideal to expand the 70503 construction site set.

Here is an economical method to clean your rails easily and gently. The cleaning pad removes dirt from the rails without harmful abrasives. The 6 mm / 1/4“ thick cleaning pad will give many hours use. Not suitable for nickel-plated track.

Non-abrasive replacement pads for the LGB 50050 Track Cleaning Attachment.

This starter set contains an old-timer train consisting of a tank locomotive and 2 passenger cars. The locomotive has a powerful Bühler motor with ball bearings as well as a headlight, sound module, and a smoke unit. The set also has a complete circle of track, a power supply, and a locomotive controller. Train length 85 cm / 33-7/16".

120 volt transformer.

This starter set contains an old-timer train consisting of a tank locomotive and 2 passenger cars in a Christmas paint scheme. The locomotive has a powerful ball bearing ­mounted Bühler motor as well as a headlight and a smoke unit. The set also contains a complete circle of track, a power supply, and a locomotive controller. Train length 85 cm / 33-7/16“.

This train can be expanded marvelously with the Christmas cars that have come out in the past.

120volt transformer for Canada and USA

The starter set for all sorts of fun. The set includes a freight train with a “Stainz” steam locomotive, a ballast car, and a loaded low-side car (load may vary). The locomotive is equipped with a powerful motor, electronic steam sound, a smoke generator. The set also includes a full circle of track (1,290 mm / 51“ ­diameter), a 120 volt power supply, and a controller. Train length 85 cm / 33-7/16”.

120 volt transformer.

This starter set contains an old-timer steam locomotive and two freight cars to go with it in the paint scheme and lettering for the Lake George and Boulder Railroad, LGB for short. Both wheel sets on the locomotive are driven with a powerful Bühler motor. The headlight at the front lights up. Twelve (12) sections of curved track, a transformer with a locomotive controller, and all of the wire required for connections are included. Length over the buffers 85 cm / 33-7/16".

120 volt transformer.

This starter set contains a construction site train consisting of a tank locomotive, a low side car, and a dump car. The locomotive has a powerful motor and a lighted headlight. The stickers included with this set can be used to decorate the locomotive and both cars. The set also has a complete circle of track, a power supply for 120 volts, and a locomotive controller. Train length 68 cm / 26-3/4".

An add-on set with another dump car, a power shovel, and construction site accessories is available under item number 49500

120 volt transformer.

This starter set includes a steam locomotive, two flat cars with a building block plate and 30 building blocks. The set also includes a complete circle of track consisting of 12 curved sections of track, a locomotive controller, a power supply for 120 volts, and feeder wires. Train length 77 cm / 30-5/16".

The 94063 building block car can be added to this train.

This is a model of a two-axle flat car. The car floor has pegs so that different superstructures can be built with the blocks of well-known manufacturers available in most toy stores.

Length over the buffers 26 cm / 10-1/4"

Liliput - 4-Axle Gondola - (FS) - 24430

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Liliput - Railway Post Car - (DRG) - 29202

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

LIMA Collection | HO| passenger car

Passenger car 2.class (DSB) type B 508620-83127-3 (consignment)

Length: 265 mm

Detailing parts enclosed.

Consignment Sale: This is a NEW unit (never used) but has been in storage for a while and therefore sold as used. This unit is inspected and found to be as-if-new. The factory warranty has expired and sold as-is. Make sure to address all your concerns before making the purchase.

This adapter is suitable for N-scale DC, DCC controllers and accessories.

INPUT: 120VAC 60 Hz 23W

OUTPUT: 12V DC 1A

MODEL: AM-1201000D41

Prototype:Different versions of the German Federal Railroad (DB) type Kmmks 51 sliding roof gondola. Short version without a brakeman's platform and without a brakeman's cab. As well as a long version with a brakeman's platform or with a brakeman's cab. The cars look as they did around 1960.

Model:Selection of the short version without a brakeman's platform, the version with a brakeman's platform, and the version with a sheet metal brakeman's cab are subject to availability. All of the cars have different car numbers. The roofs can be opened on all of the cars. Each car comes individually packaged in a marked box.
Length over the buffers for each car 11.5 cm / 4-1/2" or 12.2 cm / 4-13/16".
DC wheel set for each car 2 x 700580.

NOTE: This item is sold as PER CAR not as a SET

Prototype: Different type Tes-t-58 Kmmgks sliding roof / sliding wall cars painted and lettered for the German Federal Railroad (DB). Version without a brakeman's platform and version with a brakeman's platform. The cars look as they did around 1962.

Model: The cars have two roof colors. All of the cars have different car numbers. Each car is individually packaged in a marked box. Length over the buffers for each car 11.5 cm or 12.2 cm / 4-1/2" or 4-13/16".

DC wheel set per car 2 x 700580.

NOTE: This item is sold as PER CAR not as a SET

Prototype: Different freight cars with sheet steel walls in the sheet piling wall form of the German Federal Railroad (DB) type Gbs 256 (Glmms 64). Version without truss rods. Part of the cars as delivered new around 1966, part of the cars as they looked around 1977. Era IV

Model: The two-axle sheet piling wall cars come in an attractive display, 8 of them looked like newly delivered cars and 12 looking weathered. All of the cars have different car numbers. Each car comes individually packaged in marked boxes. Length over the buffers for each car 16.2 cm / 6-3/8".

DC wheel set for each car 2 x 700580.

NOTE: This item is sold as PER CAR not as a SET

Prototype: German Federal Railroad (DB) type Abi "Donnerbüchse" standard car. 1st and 2nd class. Era III

Prototype: German Federal Railroad (DB) type Bi "Donnerbüchse" standard car 2nd class. Era III

Prototype: German Federal Railroad (DB) type Pwi "Donnerbüchse" standard car. Era III

Eextensive catalog of the entire Märklin program (all scales: 1, HO and Z)

English edition in the format of 29 x 21 cm.

Full color, with very detailed pictures and complete product description with highlights and features.

Märklin Start Up | HO (1:87) | C-track

"Snow-Covered Track" C Track Extension Set

Marklin - K-Track - 180mm / 7-3/32" Straight - 2100 (10pk) (used)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Märklin | HO (1:87) | K-track

Left Turnout

Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts.

>

Märklin | HO (1:87) | K-track

Right Turnout

Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts.

>