Shipping Policy

Märklin System | Lighting Set for Coaches

Soft Light - Lighting Kit: Universal circuit board with several LEDs, which will fit in most of the passenger cars in the Märklin H0 program. One 73400 is required for a short car (example: Langenschwalbach cars); for long cars (example: UIC-x at 28.2 cm / 11-1/8" length) two 73400 are required. The circuit boards can be plugged together in a series or they can be shortened.

Mounting hardware is included. The separate 73404, 73405 or 73406 pickup shoe / ground spring power feed set, or the 72020 current-conducting coupler with the 72050 ground spring is required, depending on the car type.

Märklin System | Lighting Set for Coaches

White Light Lighting Kit: Universal circuit board with several LEDs to fit in most of the passenger cars in the Märklin H0 program. One 73401 board is required for a short car (example: Langenschwalbach cars); two boards are required for long cars (example: UIC-x cars with a length of 28.2 cm / 11-1/8" length). Several of these circuit boards can be plugged together or a board can be shortened.

Mounting hardware is included. Depending on the car type, the separate pickup shoe / ground spring set, item nos. 73404, 73405 or 73406 or the 72020 current conducting couplers with the 72050 ground spring is required for electrical connections.

This is a universal circuit board with two red LEDs for use with the new generation UIC-x and TEE cars in the Märklin H0 program (car length 28.2 cm / 11-1/8").

2 permanently attached connecting wires.

A 73400 lighting kit or, depending on the type of car, a 73404, 73405, or 73406 pickup shoe / ground spring power feed set is required to hook up the 73407 marker light kit

Märklin System | Lighting Set for Coaches

Warm White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

Märklin System | Lighting Set for Coaches

Cold White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

Gauge H0 - Article No. 74030
Center Rail Insulators for Märklin and TRIX C-track

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39".

The 74040 feeder wire is not suitable if interference suppressor is required. If so yo may use the 74046 Feeder wire set with interference suppressor.

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

This decoder can be installed in the C Track three-way turnout (24630) with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts, for Märklin and Trix C Track three-way turnouts. An address can be set with coding switches (MM 1–320, DCC 1–511) as well as by CVs (MM 1–320, DCC 1–2044) using the programming track.

Turnout lanterns can also be controlled. NOTE: soldering is required

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

Gauge H0 - Article No. 74990
Track Screws for Märklin and TRIX C-track

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

This is an improved version of the 7549 turnout mechanism. This mechanism can be used with the 2265 and 2266 turnouts (new versions), the 22715 and 22716 turnouts, the 2275 double slip switch, and the KOMBI extension set program. The mechanism has an automatic end shutoff feature. Automatic feedback is possible with the 72710 control box. Below-baseboard mounting can be done with the 7548 installation kit.

Motor brushes for older style motors requiring one carbon and one copper brush. E600300 includes 10 pairs.

Relex Coupler - 10PK

This coupler is for installation on cars with standard coupler pockets (NEM 362) and guide mechanisms. They are compatible with standard couplers (NEM 360)

Ausführliche Beschreibung des Märklin-Digital-Systems. In diesem Buch erhält der Leser alle wesentlichen Infos zur Central Station 3 mit der Softwareversion 2.0: u.a. Steuern mit der Central Station 3, Umrüstung auf digitales Fahren, Tipps für automatisierte Abläufe. Umfang über 190 Seiten im Format Din A4. Ausführung in deutscher Sprache.

For spur and worm gear mechanisms.

Contents: 13 grams / 1/2 oz.

Woodland Scenics | HO scale (1:87) | lighting

Wooden Pole Street Lights (3 pack)

Use to light depots, rail yards, alley ways, sidings, parking lots and more. Includes extension poles to make the light poles taller for a broader reach. Wooden Pole Street Lights are compatible with the Just Plug® Lighting System. Use one Light Hub PORT per set. 20mA set

Dimensions - 1.071" w x 3.449" h (27.2 mm w x 87.6 mm h)
Dimensions with extension piece - 1.071" w x 5.516" h (27.2 mm w x 140.1 mm h)

Woodland Scenics | HO scale (1:87) | lighting

Lamp Post Street Lights (3 pack)

Use to light street corners, residential walkways, parks and more. 20mA set

Dimensions - 0.185" w x 2.071" h (4.7 mm w x 52.6 mm h)

Woodland Scenics | HO scale (1:87) | lighting

Lamp Post Street Lights (3 pack)

Use to light street corners, residential walkways, parks and more. 20mA set

Dimensions - 0.185" w x 2.071" h (4.7 mm w x 52.6 mm h)

Woodland Scenics | HO scale (1:87) | lighting

Entry Wall Mount Lights (2 pack)

Use on homes, business entry ways, garages and more. 20mA set

Dimensions - 0.193" w x 0.197" h (4.9 mm w x 5.0 mm h)

Woodland Scenics | N scale | lighting

Wall-Mount Gooseneck Light (2 pack)

Use on business structures and rural outbuildings, billboards, signs, factory docks and more. 20mA set

Dimensions - 0.264" w x 0.205" h (6.7 mm w x 5.2 mm h)