Scissor pantograph, DB type DBS 54, Era III - V

HO-scale

This kit consists of a smoke generator insert, replacement smoke tube, cleaning wire, and tweezers. Install from above a locomotive.

Install from below on a locomotive.

Marklin - Curved Ramp - Radius 360 mm / 14-3/16" - 7267 (each)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

This control box is for operating 4 double solenoid accessories with end shutoff contacts. It has an automatic feedback of the accessory setting by means of LEDs when used with the 7549 turnout mechanism (K) or the 74490 turnout mechanism (C). The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

Marklin - Control Box (each) - 7272

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

This control box is for operating 4 double solenoid accessories such as turnouts and signals or up to 8 uncoupler tracks. The position of the buttons shows the settings for accessories connected to the sockets for those buttons. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This control box is for turning 4 different track or accessory circuits on and off. For example, power can be controlled in 4 storage sidings in 4 different track circuits. Unit comes with 8 sockets on the back. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included. Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

This control box is for dividing a track or accessory circuit into 4 different circuits, each with two connections. For example, 4 storage sidings in the same track circuit or 4 users in the same accessory circuit can be turned on and off. The control box comes with 8 sockets on the back and a plug on one end and a socket on the other end. All of the connections are for the new plugs from the 71400 sets. 8 appropriate plugs included.

Dimensions 80 x 40 mm / 3-1/8" x 1-9/16".

Märklin | HO scale (1:87) | lighting

Height 100 mm / 3-15/16".

Märklin | HO scale (1:87) | lighting

Double Streetlight
Height 100 mm / 3-15/16"

Marklin - Small Streetlight - 72809 (each)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Double Light commonly used on Station Platforms

Height 70 mm / 2-3/4"

Lattice Mast Light

Height 140 mm / 5-1/2

Lighted (none working) Platform Clock

Height 56 mm / 2-7/32""

Märklin System | Pickup Set for Coaches

This is a pickup set for the 73300 lighting kit for "Donnerbüchsen" / "Thunder Box" passenger cars based on 4313 / 4314 (coaches). A pickup shoe and a ground spring are included. Mounting hardware is included.

This product is a cooperative project with the firm Viessmann Model Technology, Inc

Märklin System | Pickup Set for Baggage Car

This is a pickup set for the 73300 lighting kit for "Donnerbüchsen" / "Thunder Box" passenger cars based on 4315 (baggage car). A pickup shoe and a ground spring are included. Mounting hardware is included.

This product is a cooperative project with the firm Viessmann Model Technology, Inc

Märklin System | Lighting Set for Coaches

Soft Light - Lighting Kit: Universal circuit board with several LEDs, which will fit in most of the passenger cars in the Märklin H0 program. One 73400 is required for a short car (example: Langenschwalbach cars); for long cars (example: UIC-x at 28.2 cm / 11-1/8" length) two 73400 are required. The circuit boards can be plugged together in a series or they can be shortened.

Mounting hardware is included. The separate 73404, 73405 or 73406 pickup shoe / ground spring power feed set, or the 72020 current-conducting coupler with the 72050 ground spring is required, depending on the car type.

Märklin System | Lighting Set for Coaches

White Light Lighting Kit: Universal circuit board with several LEDs to fit in most of the passenger cars in the Märklin H0 program. One 73401 board is required for a short car (example: Langenschwalbach cars); two boards are required for long cars (example: UIC-x cars with a length of 28.2 cm / 11-1/8" length). Several of these circuit boards can be plugged together or a board can be shortened.

Mounting hardware is included. Depending on the car type, the separate pickup shoe / ground spring set, item nos. 73404, 73405 or 73406 or the 72020 current conducting couplers with the 72050 ground spring is required for electrical connections.

This is a universal circuit board with two red LEDs for use with the new generation UIC-x and TEE cars in the Märklin H0 program (car length 28.2 cm / 11-1/8").

2 permanently attached connecting wires.

A 73400 lighting kit or, depending on the type of car, a 73404, 73405, or 73406 pickup shoe / ground spring power feed set is required to hook up the 73407 marker light kit

Märklin System | Lighting Set for Coaches

Warm White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

Märklin System | Lighting Set for Coaches

Cold White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

Gauge H0 - Article No. 74030
Center Rail Insulators for Märklin and TRIX C-track

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39".

The 74040 feeder wire is not suitable if interference suppressor is required. If so yo may use the 74046 Feeder wire set with interference suppressor.

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

This decoder can be installed in the C Track three-way turnout (24630) with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts, for Märklin and Trix C Track three-way turnouts. An address can be set with coding switches (MM 1–320, DCC 1–511) as well as by CVs (MM 1–320, DCC 1–2044) using the programming track.

Turnout lanterns can also be controlled. NOTE: soldering is required

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

This is a standard design 23 meter / 74 foot 9 inch turntable. It is designed for conventional and digital locomotive operation. The remote controlled deck has a built-in motor. It can only be controlled digitally with the Mobile Station 2 and Central-Station 2 and 3 (not included). Control with the Central-Station 2 and 3 is especially easy by means of track indexing (after carrying out an update), or with different digital central controllers that use the DCC digital format.

This turntable can be used with the 72886 roundhouse locomotive shed. Various sound functions can be controlled. LEDs are used to light the turntable operator's hut and the outside lighting and they can be controlled.

This link will take you to the 74861 Manual (turntable manual)

This set has 3 track spoke connections for C Track. They can be inserted at the location of your choice on the rim of the turntable pit. The track spoke connections have built-in locomotive current contacts. Length 57.5 cm / 2-1/4".

Gauge H0 - Article No. 74990
Track Screws for Märklin and TRIX C-track

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

Märklin System C-Track | Light Mast for the Uncoupler Track

The light mast can be plugged into the Märklin 24997 C Track or TRX 62997 C-track (DC). The mast signal lights up when the uncoupler track is activated. Metal mast. Height 85 mm / 3-38". This light mast is technically the same as the earlier 5113 mast.

Marklin -Ground Terminal Clip - 7500 (new)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - K-Track Ground Terminal Clip - 7500 (used)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7504 (new)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7504 (used)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary Feeder Masts - K-Track - 7509 (10pk)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary Feeder Masts - K-Track 7509 (4pk)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary Feeder Mast - K-Track - 7512 (each)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7522 (5pk) (new)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7522 (5pk) (used)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary - Cantilever Support Arm - K-Track - 7525 (10pk)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

This is an improved version of the 7549 turnout mechanism. This mechanism can be used with the 2265 and 2266 turnouts (new versions), the 22715 and 22716 turnouts, the 2275 double slip switch, and the KOMBI extension set program. The mechanism has an automatic end shutoff feature. Automatic feedback is possible with the 72710 control box. Below-baseboard mounting can be done with the 7548 installation kit.

Prototype: Low side car, boxcar, and dump car painted and lettered for a construction train. Modern design construction vehicle.

• Track for expanding a C Track layout.
• A variety of ways to play with the inclusion of the construction vehicle and load.

Model: All of the cars have Relex couplers.
Length of the freight car set 34.5 cm / 13-9/16".

Contents:

• 5 no. 24188 straight track,
• 4 no. 24172 straight track,
• 1 no. 24224 curved track,
• 1 no. 24612 right turnout,
• and 1 no. 24977 track bumper.

The construction vehicle is made of metal. "Gravel" freight load included.

Prototype: 1 German Railroad, Inc. (DB AG) class 120 electric locomotive (former road number 120 160), 1 type RAILab 1 measurement car, and 1 type Dienstmz. 307 cab control car. The units look as they do in Era VI.

MHI - One Time series

Märklin - Gauge Z - Article No. 81701
"Freight Train" Starter Set with a Class 89 Steam Locomotive, and Oval of Track, a Locomotive Controller, and a Power Supply

Prototype: German Federal Railroad (DB) class 89 steam locomotive, 1 DB low side car with a tarp, 1 boxcar.

American Christmas Starter Set | Märklin

Article No. 441-81846 Christmas Train Set  - Z Scale

Included are 3 each decorated Christmas trees and kits for "Christmas Stands", "Santa Claus", and "Skating Rink", which can be assembled to make a small winter Christmas market. The stands can also be transported on the high-side gondola. 

Märklin - Article No. 441-81874 Starter Set  - Z Scale
"Museum Passenger Train" Starter Set with a Class 24 Steam Locomotive.

Prototype: BR 24 museum steam locomotive, road number 24 009. 1 type Pwi baggage car, 1 corridor car, 1st/2nd class, and 1 type WRi refreshment car. The locomotive and cars look as they currently do in real life. Era III / Era VI (museum)

Märklin mini-club | Z-scale (1:220) | starter sets

"Modern Freight Service" Starter Set with a Class 285 Diesel Locomotive

1 class 285 Rheincargo diesel locomotive. 3 VTG freight cars, of them 1 type Eaos gondola, 1 type Falns dump car, and 1 type Shimmns sliding tarp car. The locomotive and cars look as they did in Era VI .

Märklin - Gauge Z - Article No. 8190

Contents: 10 straight tracks, 2 curved tracks, 2 turnouts and instructions. 

Märklin - Gauge Z - Article No. 8191
Contents: 10 straight tracks, 2 curved tracks, a control box, a distribution strip, wire, plugs and sockets, and instructions. 

Märklin - Gauge Z - Article No. 8192

Contents: 6 straight tracks, 6 curved tracks, 2 electric curved turnouts, a control box, a distribution strip, wire, plugs and sockets, and instructions. 

Märklin - Gauge Z - Article No. 8193

Contents: 8 straight tracks, 2 curved tracks, 2 electric curved turnouts, a control box, a distribution strip, wire, plugs and sockets, and instructions 

Märklin - Gauge Z - Article No. 8194

Contents: 10 straight tracks, 1 double slip switch, 2 electric turnouts, 4 track bumpers, a control box, a distribution strip, wire, plugs and sockets, and instructions.

Märklin - Gauge Z - Article No. 8194

Contents: This set contains all of the parts needed to set up catenary on an S + E layout. Contents: 19 catenary masts, 20 sections of catenary wire, 8 insulators, 6 connecting springs, and instructions.

Märklin - Gauge Z - Article No. 8194

Contents: This set contains all of the parts needed to set up catenary on an S + E layout. Contents: 19 catenary masts, 20 sections of catenary wire, 8 insulators, 6 connecting springs, and instructions.

Prototype: 2 German Federal Railroad (DB) type Rmms 33 stake cars. The cars look as they did in Era III. One car does not have a hand brake and does have wooden sides and wooden stakes. The other car has a brakeman's platform, metal sides, and pressed metal stakes. Hanomag delivery truck with a flatbed. Era III

Prototype: Car set consisting of 4 type KLV flat cars for AAE Cargo. Designed for the transport of semi-truck rigs. Era VI

Prototype: 2 German Railroad, Inc. (DB AG) type Rils 652 four-axle tarp cars with tarp lettering for DB Schenker. Era VI

Highlights: Car floors constructed of metal.

Prototype: 3 French State Railways (SNCF) type Rils tarp cars. European standard design, 19.90 meters / 65 feet 3-1/2 inches in length. Version with single-piece tarp and rectangular buffers. The cars look as they did in Era V.

Prototype: 9 flat car with stakes with a load of wood, KLV transport car with a 40 foot "GENSTAR" container, and a "Tycza Gas" gas tank car without a heat shield. All of the cars look as they did in Era IV.

One-time production for the Märklin Dealer Initiative (MHI)

Märklin - Gauge Z - Article No. 8500
Straight Track - Length 110 mm / 4-3/8".

Märklin - Gauge Z - Article No. 8503
Straight Track - Length 55 mm / 2-3/16"

Märklin - Gauge Z - Article No. 8504
Straight Track - Length 25 mm / 1"

Märklin - Gauge Z - Article No. 8505
Straight Track - Length 220 mm / 8-13/16"

Märklin - Gauge Z - Article No. 8506

Straight Track - Length 108.6 mm / 4-1/4" - For adjusting length on the 8559 crossing and 8560 double slip switch.

Märklin - Gauge Z - Article No. 8507

Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

Märklin - Gauge Z - Article No. 8510

Curved Track - Radius 145 mm / 5-3/4". 45°

Märklin - Gauge Z - Article No. 8520

Curved Track - Radius 195 mm / 7-11/16". 45°

Märklin - Gauge Z - Article No. 8521

Curved Track -Radius 195 mm / 7-11/16". 30°

Märklin - Gauge Z - Article No. 8530

Curved Track - Radius 220 mm / 8-11/16". 45°

Märklin - Gauge Z - Article No. 8531

Curved Track - Radius 220 mm / 8-11/16". 30°

Märklin - Gauge Z - Article No. 8559

Crossing - 112.8 mm / 4-7/16" - 13°