This is for converting Märklin locomotives with built-in AC/DC / field coil motors. The AC/DC märklin locomotive decoder supports the digital formats mfx, MM1, MM2, and DCC. It has particularly powerful function outputs for old Telex couplers, light bulbs, and smoke generators. The classic unregulated running behavior under different loads remains preserved on "Old and Youngtimers" upgraded with this decoder.

This is a circuit board with 2 buffer capacitors with each 1 Farad for connection to the mLD3 und mSD3, item numbers 60972, 60975, 60976, and 60977. The buffer capacitor prevents light flickering and sound dropout from dirty track sections.

This decoder is for converting Märklin/Trix H0 locomotives with built-in high-efficiency motors or other DC motors. The märklin LokDecoder mLD3 has a wiring harness soldered to it. The märklin LokDecoder mLD3 supports the digital formats mfx, MM1, MM2, and DCC. A plug for NEM 652 interface connectors is included for do-it-yourself soldering.

Märklin 7100 (HO) Single conductor wire - Gray. 10 m / 33".

Single conductor wire - Blue 10 m / 33".

Single conductor wire - Brown 10 m / 33".

Single conductor wire - Yellow 10 m / 33".

Single conductor wire - Red 10 m / 33".

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

BLUE wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

BROWN wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

RED wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

MSRP $6.00 USD / 5,29 € incl. Tax … we sell for less

YELLOW wire: Length of each roll 10 meters / 33 feet. Wire cross section 0.75 sq. mm / 0.001 sq. in. Recommended for all Märklin layouts and scales up to 1-gauge.

Märklin Article No. 7149
Oiler with Narrow Applicator Opening

Contains 10 ml special oil for lubricating locomotives and cars.

Package of 5 springs for reverse units in all conventional locomotives.

10 Relex coupler heads. These couplers can be used on locomotives and cars with standard coupler pockets (NEM 362).

Scissor pantograph, DB type DBS 54, Era III - V

HO-scale

Install from below on a locomotive.

Märklin | HO scale (1:87) | lighting

Height 100 mm / 3-15/16".

Märklin | HO scale (1:87) | lighting

Double Streetlight
Height 100 mm / 3-15/16"

Märklin System | Pickup Set for Coaches

This is a pickup set for the 73300 lighting kit for "Donnerbüchsen" / "Thunder Box" passenger cars based on 4313 / 4314 (coaches). A pickup shoe and a ground spring are included. Mounting hardware is included.

This product is a cooperative project with the firm Viessmann Model Technology, Inc

Märklin System | Pickup Set for Baggage Car

This is a pickup set for the 73300 lighting kit for "Donnerbüchsen" / "Thunder Box" passenger cars based on 4315 (baggage car). A pickup shoe and a ground spring are included. Mounting hardware is included.

This product is a cooperative project with the firm Viessmann Model Technology, Inc

This is a universal circuit board with two red LEDs for use with the new generation UIC-x and TEE cars in the Märklin H0 program (car length 28.2 cm / 11-1/8").

2 permanently attached connecting wires.

A 73400 lighting kit or, depending on the type of car, a 73404, 73405, or 73406 pickup shoe / ground spring power feed set is required to hook up the 73407 marker light kit

Märklin System | Lighting Set for Coaches

Warm White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

Märklin System | Lighting Set for Coaches

Cold White LED Lighting Kit: This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be cut at several locations for shorter cars. Retaining brackets for mounting the circuit board in the car are included.

This decoder can be installed in all C Track turnouts with an electric mechanism. The digital formats supported are mfx, Motorola, and DCC. Connections are with plug contacts. An address from 1 to 256 can be set with coding switches.

A digital decoder can be installed simultaneously or later on with the electric mechanism for turnouts. The decoder is simply connected with plug contacts and it can be given a custom address for each turnout (Address 1 to 256). Tools or special knowledge is not required for the installation. The digital current supply can be taken directly from the train operation contact for the turnout. This gives you a finished digital turnout that is immediately ready for use on temporary layouts.

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

This is a standard design 23 meter / 74 foot 9 inch turntable. It is designed for conventional and digital locomotive operation. The remote controlled deck has a built-in motor. It can only be controlled digitally with the Mobile Station 2 and Central-Station 2 and 3 (not included). Control with the Central-Station 2 and 3 is especially easy by means of track indexing (after carrying out an update), or with different digital central controllers that use the DCC digital format.

This turntable can be used with the 72886 roundhouse locomotive shed. Various sound functions can be controlled. LEDs are used to light the turntable operator's hut and the outside lighting and they can be controlled.

This link will take you to the 74861 Manual (turntable manual)

Prototype: Low side car, boxcar, and dump car painted and lettered for a construction train. Modern design construction vehicle.

• Track for expanding a C Track layout.
• A variety of ways to play with the inclusion of the construction vehicle and load.

Model: All of the cars have Relex couplers.
Length of the freight car set 34.5 cm / 13-9/16".

Contents:

• 5 no. 24188 straight track,
• 4 no. 24172 straight track,
• 1 no. 24224 curved track,
• 1 no. 24612 right turnout,
• and 1 no. 24977 track bumper.

The construction vehicle is made of metal. "Gravel" freight load included.

Prototype: 1 German Railroad, Inc. (DB AG) class 120 electric locomotive (former road number 120 160), 1 type RAILab 1 measurement car, and 1 type Dienstmz. 307 cab control car. The units look as they do in Era VI.

MHI - One Time series

Märklin - Gauge Z - Article No. 81701
"Freight Train" Starter Set with a Class 89 Steam Locomotive, and Oval of Track, a Locomotive Controller, and a Power Supply

Prototype: German Federal Railroad (DB) class 89 steam locomotive, 1 DB low side car with a tarp, 1 boxcar.

American Christmas Starter Set | Märklin

Article No. 441-81846 Christmas Train Set  - Z Scale

Included are 3 each decorated Christmas trees and kits for "Christmas Stands", "Santa Claus", and "Skating Rink", which can be assembled to make a small winter Christmas market. The stands can also be transported on the high-side gondola. 

Märklin - Article No. 441-81874 Starter Set  - Z Scale
"Museum Passenger Train" Starter Set with a Class 24 Steam Locomotive.

Prototype: BR 24 museum steam locomotive, road number 24 009. 1 type Pwi baggage car, 1 corridor car, 1st/2nd class, and 1 type WRi refreshment car. The locomotive and cars look as they currently do in real life. Era III / Era VI (museum)

Märklin mini-club | Z-scale (1:220) | starter sets

"Modern Freight Service" Starter Set with a Class 285 Diesel Locomotive

1 class 285 Rheincargo diesel locomotive. 3 VTG freight cars, of them 1 type Eaos gondola, 1 type Falns dump car, and 1 type Shimmns sliding tarp car. The locomotive and cars look as they did in Era VI .

Prototype: 2 German Federal Railroad (DB) type Rmms 33 stake cars. The cars look as they did in Era III. One car does not have a hand brake and does have wooden sides and wooden stakes. The other car has a brakeman's platform, metal sides, and pressed metal stakes. Hanomag delivery truck with a flatbed. Era III

Prototype: Car set consisting of 4 type KLV flat cars for AAE Cargo. Designed for the transport of semi-truck rigs. Era VI

Prototype: 2 German Railroad, Inc. (DB AG) type Rils 652 four-axle tarp cars with tarp lettering for DB Schenker. Era VI

Highlights: Car floors constructed of metal.

Prototype: 3 French State Railways (SNCF) type Rils tarp cars. European standard design, 19.90 meters / 65 feet 3-1/2 inches in length. Version with single-piece tarp and rectangular buffers. The cars look as they did in Era V.

Prototype: 9 flat car with stakes with a load of wood, KLV transport car with a 40 foot "GENSTAR" container, and a "Tycza Gas" gas tank car without a heat shield. All of the cars look as they did in Era IV.

One-time production for the Märklin Dealer Initiative (MHI)

Prototype: 1 type Pwgs 41 freight train baggage car, 2 type Omm 52 gondolas without hand brakes, 1 type G 10 boxcar without a hand brake, 1 type K 15 hinged roof gondola with a hand brake. All cars for the German Federal Railroad (DB). The cars look as they did in Era III.

Prototype: German Federal Railroad (DB) type Tams 886 as it looked in Era IV.

Prototype: 2 German Federal Railroad (DB) pairs of passenger cars consisting of 3-axle rebuild cars and 1 commuter cab control car. 1 pair of rebuild cars type AB3yge, 1st/2nd class and type B3yge, 2nd class, 1 pair of rebuild cars type B3yge, 2nd class, and 1 type BD4nf-59 "Silberling" / "Silver Coins" cab control car. The cars look as they did in Era III around 1965.

Exclusive edition for the Märklin Dealer Initiative (MHI)

Prototype: Era V passenger car set in the striking "Touristikzug" paint scheme, consisting of 2 each type Bvmkz 856 passenger cars, 2nd class, 2 each type Bpmz 857 passenger cars, 2nd class, and 1 type WRkmz 858.1 dining car.

MHI - One Time series

Prototype: DB type Bpmz 291 open seating car. All of the cars look as they did from 1979-1982. Era IV-V

Prototype: DB type Bpmz 291 open seating car. All of the cars look as they did from 1979-1982. Era IV-V

Prototype: SBB type Bcm Eurofima slumber car. All of the cars look as they did from 1979-1982. Era IV

Prototype: French State Railways (SNCF) class 232 TC as it looked in Era III.

Prototype: German Federal Railroad (DB) class 221 (former V 200.1) heavy diesel hydraulic general-purpose locomotive. The locomotive looks as it did in Era IV around 1985. Era IV

Prototype: German Federal Railroad (DB) class 194. The locomotive looks as it did in Era IVb on the Geislingen Grade. Era IV

Prototype: German Federal Railroad (DB) class 515 rechargeable battery powered rail car and class 815 control car in an ocean blue / ivory paint scheme for Era IV. The units look as they did around 1978.

MHI edition | One-Time Series

Prototype: Swiss Federal Railways (SBB/CFF/FFS) class 460 as it looked in Era VI around 2018.

Three-Phase Current Pioneer
The three-phase current asynchronous motor was first used worldwide on electric standard gauge locomotives on the five class 120.0 preproduction locomotives delivered in 1979/80. This type of motor can be controlled infinitely variably. The regular production locomotives, road numbers 120 101-160, emerged from AEG, BBC, Siemens, Krauss-Maffei, Krupp, and Henschel between 1987 and 1989 with numerous improvements. They were used immediately pulling high-quality passenger trains (IC, IR), but they could also be seen pulling fast freight trains on the new construction routes. ...../continued below

Prototype: German Railroad, Inc. (DB AG) class 120 fast general-purpose locomotive. The locomotive looks as it did in Era V

Prototype: German Federal Railroad (DB) class 150 heavy freight locomotive. Chrome oxide green version with high performance vents, without a rain gutter, and with rounded engine room windows. The locomotive looks as it did in Era IV.

Prototype: Swiss Federal Railways (SBB) class Re 4/4 II general-purpose locomotive in a green paint scheme as it looked in Era IV.

Prototype: German Federal Railroad (DB) maintenance car

Helping Fast

Action on a model railroad layout: The fire department recovery crane car set offers all kinds of realistic sound from the German siren to the alarm response radio message. Just right for children ages six and above, this sturdy car set from the Start up series is the ideal toy and the perfect add-on to the "Fire Department" starter set (item number 29752). This will make every young model railroader's heart beat a little faster.

Prototype: German Railroad, Inc. (DB Netz) Krupp-Ardelt design crane car, crane tender car, and equipment cars. Version as service cars for the railroad fire department / emergency response group.

This is a freight car in an unusual design for the Super Hero The Flash. The car has Relex couplers for fast and easy coupling. Length over the buffers 12 cm / 4-1/2". The Flash play figure made of metal is included. Size of the play figure is 4 cm / 1-9/16".

The ideal addition to the 29828 Batman starter set and the other Super Heroes item numbers 36656, 44825, 44826, 44827, 44828, and 44830.

This is a freight car in a great design for the Super Hero Green Lantern. The car has a pickup shoe and a lighted car lantern. It also has Relex couplers for fast and easy coupling. Length over the buffers 11.5 cm / 4-1/2". A Green Lantern play figure made of metal is included. Size of the play figure is 4 cm / 1-9/16".

The ideal addition to the 29828 Batman starter set and the other Super Heroes item numbers 36656, 44825, 44826, 44827, 44828, and 44829.

Micro Engineering | HO scale (1:87) | track accessories

Code 70 Standard Gauge Flex-Track(TM)

Nonweathered 3' pkg(6)

Miniatronics | Lighting Set for Coaches

Passenger Car Interior Lighting Kit - For DC or DCC -- Fluorescent; 1/2 x 10", 7 LEDs, 42mA Includes 1 Set Pick-Up Shoes

MSRP: $35.99 USD

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase.

Cuomo's Gifts
Walthers Part # 490-2577
N scale, Retail: $24.98

Assembled - 6-1/2 x 3-5/8" 16.5 x 9.2cm
Walthers Part # 490-2623
N scale, Retail: $39.98

The Model Power built-up Ballast Transportation is a typical metal-construction rock crusher fed by a conveyor that's perfect for industrial quarry and mining scenes. Underneath the headhouse there's room for a railroad spur for hopper cars or a truck loading lane

Assembled - 1-5/8 x 2-1/2" 4.1 x 6.4cm
Walthers Part # 490-790
HO scale, Retail: $39.98

Ausführliche Beschreibung des Märklin-Digital-Systems. In diesem Buch erhält der Leser alle wesentlichen Infos zur Central Station 3 mit der Softwareversion 2.0: u.a. Steuern mit der Central Station 3, Umrüstung auf digitales Fahren, Tipps für automatisierte Abläufe. Umfang über 190 Seiten im Format Din A4. Ausführung in deutscher Sprache.

Automatically change polarity of your reverse loop or reversing section.

Railpower 1370 Power Pack
Walthers Part # 500-1370

Power up to 5 average HO trains. Solid state circuitry delivers 18VA output and superior slow-speed acceleration. Features a mainline direction switch, on/off, Red LED pilot light, 300° speed control and circuit protection.

North American Version
 
A complete DCC starter system in the palm of your hand! Includes many of the features of the NCE Powerhouse PH-PRO, but at a lower price. Operates up to 6 trains plus extra cabs. Wireless compatible. Includes 120/230V power supply.

With the E-Z Track® Expander Set, you can add to the track included with our train sets or create new configurations of turnouts, branchlines, and double-track mainlines on your existing railroad. Also, a handy track plan manual included with the Expander Set contains ideas to inspire railroad tycoons of all ages. Offered in steel alloy (with black roadbed) or nickel silver (with gray roadbed) versions.

Features include:

• 12 pieces of snap-fit E-Z Track®, including 4 pieces of 9″ straight, 4 pieces 18″ radius curved track, 1 remote turnout-left, 1 remote turnout-right, and 2 Hayes bumpers
• quick, easy assembly on floors, tables, and carpets without the need for special tools or fasteners
• helpful track plan manual

NOCH | all scale | scenery

Grass Tufts “Field Plants”
Light, medium and dark green finish, 104 pieces, 6 mm

Grass Tufts with a length of 6 mm in various shades of green!
With the application of Grass Tufts, many scenes such as country lanes, embankments, forest edges or meadows can be easily created. You can produce natural-looking vegetation at the flick of a wrist. The Grass Tufts are easy to work with, very flexible and thus can simply be inserted into the landscape. The different shades of green allow a diverse landscape to flourish.

OXFORD | HO scale (1:87) | vehicles

1960 Ford Fairlane 500 Town Sedan - Monte Carlo Red, Corinthian White

Pan Pastel | all scales | track accessories

7-Color Modeler's Weathering Kit -- Rust & Earth

These custom color sets make it easy to age and weather all types of models in any scale. Sets include seven colors, a palette tray for blending and Sofft tools for application.

Pan Pastel | all scales | track accessories

7-Color Modeler's Weathering Kit -- Grays, Grime & Soot

These custom color sets make it easy to age and weather all types of models in any scale. Sets include seven colors, a palette tray for blending and Soft tools for application.

PECO | HO (1:87) | all track

Code 70/75/83 Rail Joiners

Walthers Part # 552-SL110

PECO | HO (1:87) | all track

Track Nails
14mm, chemically blackened mild steel.

- Length: 14mm
- All PECO Flexible track systems
- approx. 250 pieces
- 1/4oz / 7.1g

Walthers Part # 552-SL14

PECO | N-scale (1:160) | Code 80 track

Code 80 Flex track with wooden ties: 36" / 91.4cm Section
25 pieces (25 pack)

Walthers Part # 552-SL300

PECO | N-scale (1:160) | Code 80 track

Code 80 Flex track with wooden ties: 36" / 91.4cm Section
5 pieces (5 pack)

Walthers Part # 552-SL300