Woodland Scenics -- SubTerrain System

Hot Wire Foam Cutter
Walthers Part # 785-1435

Shape, sculpt, cut and design in foam with this handy hot wire cutter. Easy to assemble and use, it features special Nichrome wire and adjustable collars for clean, accurate cuts. Perfect for making layout scenery, dollhouses, art or craft projects and school assignments.

An optional Bow and Guide Accessory (785-1437) increases the versatility of the Hot Wire Cutter, allowing cuts in material from 1/4 to 5" thick or to cut at precise angles.

Replacement Nichrome Wire is also available as item #785-1436

12oz 355mL
Walthers Part # 785-1444
A scale

Low-Temperature Foam Glue Gun
Walthers Part # 785-1445
A scale

pkg(10)
Walthers Part # 785-1446
A scale

A non-shrinking, easily sanded and lightweight filling material having the same characteristics as foam. Fill cracks and gaps on foam. Sand when dry.

16 oz vol (473 mL)

Smooth-It™ 1qt / 946mL
Walthers Part # 785-1452
A scale

Smooth-It is a plaster material that can be used to smooth rough spots, or create paved areas such as runways, roads, parking lots and more. Mix with water and apply directly to any hard surface.

Top Coat™ - Asphalt
Walthers Part # 785-1453
A scale

Create realistic paved surfaces anywhere on your layout. Ideal for use over Smooth-It (785-1452, sold separately) or any other material. Can be applied full-strength, or thinned with water to simulate new or aged asphalt. Can also be mixed with Concrete Top Coat (785-1454, sold separately) for weathered appearance.

Top Coat™ - Concrete
Walthers Part # 785-1453
A scale

Create realistic concrete surfaces anywhere on your layout. Ideal for use over Smooth-It (785-1452, sold separately) or any other material. Can be applied full-strength, or thinned with water to simulate new or aged concrete. Can also be mixed with Asphalt Top Coat (785-1453, sold separately) for weathered appearance.

Paving Tape™ 1/4" x 30' .62cm x 9m
Walthers Part # 785-1455, p. 763 Walthers 2020 HO Scale Reference
A scale

Use this adhesive-backed foam tape to create straight-edged forms for paving, even on curves. Model streets, roads, sidewalks and parking lots. Easy to apply and remove. Includes Spreader.

Track-Bed™ Sheets (6 pack) - HO/O Scale
Walthers part number: 785-1470

Sheets are great for railyards and sidings. They align well with cork or Homasote®*. Track-Bed deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle.

Install easily with Foam Tack™ Glue (ST1444). Pin in place with Foam Nails (ST1432).

6 sheets/pkg- 3/16 in D x 5 in W x 24 in L (5 mm x 12.7 cm x 60.9 cm)

*Homasote® is a registered trademark of Homasote Company.

Track-Bed™ Roll - N Scale

Track-Bed Roll offers a smooth application. It deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle.

Aligns well with cork or Homasote®* applications. Also works great for H0n3 and Hon30 gauge.

Track-Bed Roadbed Material - Super Sheet - 12 x 24 x 1/8" 5.1 x 9.4 x .3cm - HO Scale

Identical in color and composition to Track-Bed sections, but in a wider size for use in yards, station areas and more.

Track-Bed™ Track-Bed™ Roadbed Material - N Scale - 12 x 24 x 1/8" 5.1 x 9.4 x .3cm

Walthers Part # 785-1341

Walthers Part # 785-1342

Walthers Part # 785-1343

Walthers Part # 785-1344

Walthers Part # 785-1344

A scale,

Walthers Part # 785-1346

Blended Turf - 57.7 Cubic Inches 945 Cubic Centimeters - Green Blend

Walthers Part # 785-1349

Blended Turf - 57.7 Cubic Inches 945 Cubic Centimeters - Earth Blend

Walthers Part # 785-1350

Walthers Part # 785-1353

Walthers Part # 785-1354

Walthers Part # 785-1355

Walthers Part # 785-1356

Walthers Part # 785-1361

Walthers Part # 785-1362

Walthers Part # 785-1363

Walthers Part # 785-1364

Walthers Part # 785-1365

Walthers Part # 785-1366

A scale

Walthers Part # 785-41
A scale

Add texture and highlights to trees, grasses, foliage and other ground covers. Six realistic colors model fresh, scorched and dying grasses, moss, weeds and dirt roads. Attach with Scenic Cement™. Purchase the Scenery Manual for additional information about how to use the Landscape System.

Walthers Part # 785-42
A scale

Add texture and highlights to trees, grasses, foliage and other ground covers. Six realistic colors model fresh, scorched and dying grasses, moss, weeds and dirt roads. Attach with Scenic Cement™. Purchase the Scenery Manual for additional information about how to use the Landscape System

Walthers Part # 785-43
A scale

Add texture and highlights to trees, grasses, foliage and other ground covers. Six realistic colors model fresh, scorched and dying grasses, moss, weeds and dirt roads. Attach with Scenic Cement™. Purchase the Scenery Manual for additional information about how to use the Landscape System.

Walthers Part # 785-44
A scale

Add texture and highlights to trees, grasses, foliage and other ground covers. Six realistic colors model fresh, scorched and dying grasses, moss, weeds and dirt roads. Attach with Scenic Cement™. Purchase the Scenery Manual for additional information about how to use the Landscape System.

Walthers Part # 785-45
A scale

Add texture and highlights to trees, grasses, foliage and other ground covers. Six realistic colors model fresh, scorched and dying grasses, moss, weeds and dirt roads. Attach with Scenic Cement™. Purchase the Scenery Manual for additional information about how to use the Landscape System.

Fine Turf (18 in3)(295 cm3) -- Weeds
Walthers Part # 785-46
A scale

Add texture and highlights to trees, grasses, foliage and other ground covers. Six realistic colors model fresh, scorched and dying grasses, moss, weeds and dirt roads. Attach with Scenic Cement™. Purchase the Scenery Manual for additional information about how to use the Landscape System.

Blended Turf - 54 Cubic Inches 885 Cubic Centimeters - Green Blend

Walthers Part # 785-49

A scale

Blended Turf - 54 Cubic Inches 885 Cubic Centimeters - Earth Blend

Walthers Part # 785-50

A scale

Walthers Part # 785-60

A scale

Walthers Part # 785-61

A scale

Walthers Part # 785-62

A scale

Walthers Part # 785-63

A scale

Walthers Part # 785-64

A scale

Walthers Part # 785-65

A scale

Green Deciduous -- Medium Green
Walthers Part # 785-1111
All scale

 
3/4 to 3" 1.9 to 7.6cm Tall pkg(21)

Green Deciduous -- Medium Green
Walthers Part # 785-1112
All scale

 
3 to 7" 7.6 to 17.8cm Tall pkg(6)

Pines -- Forest Green
Walthers Part # 785-1113
All scale

 
2-1/2 to 6" 6.4 to 15.2cm pkg(24)

Deciduous -- 3/4 to 2" 1.9 to 5.1cm pkg(114)
Walthers Part # 785-1120
All scale

Deciduous -- 2 to 3" 5.1 to 7.6cm pkg(57)
Walthers Part # 785-1121
All scale

Deciduous -- 3 to 5" 7.6 to 12.7cm pkg(28)
Walthers Part # 785-1122
All scale

Deciduous -- 5 to 7" 12.7 to 17.8cm pkg(12)
Walthers Part # 785-1123
All scale

Pine -- 2-1/2 to 4" 6.4 to 10.2cm pkg(70)
Walthers Part # 785-1124
All scale

Pine -- 4 to 6" 10.2 to 15.2cm pkg(44)
Walthers Part # 785-1125
All scale

Clean Track Solution - Tidy Track(TM)
Walthers Part # 785-4554
A scale

Steel Rail
Walthers Part # 785-4580
A scale

Rusty Rail
Walthers Part # 785-4581
A scale

Weathered Tie
Walthers Part # 785-4582
A scale

Use the Easy Rock Carving Tools with Carving Plaster to carve custom rock formations.

The Strata Tool helps you carve and shape large areas fast to model strata, blasted rock and other weathered and eroded outcrops.

The Carving Tool has two sides - a Chisel and a Pick. Use the Chisel to carve gouges and cavities. Use the Pick to carve grooves, fine-line abrasions and striation markings.

Keep your carving area free from debris with the Duster.

3 piece set

WOODLAND® | HO scale (1:87) | heavy machinery

Track-Type Loader
HO Scale Kit

Walthers Part # 785-235

Hauling big loads of dirt and debris is what this vehicle does best. Add piles of junk or dirt in its big bucket for realism when you add it to your layout.

© XURON Corp. | precision tools

Track Cutter

A favorite of model railroaders worldwide. Xuron®'s Micro-Shear® cutting action leaves clean square cuts on both brass and nickel silver track - sizes HO, N and Z (code 100).

For best results, position track in the center of the jaws (top to bottom).

Not for use on nichrome or other types of hard wire.

© XURON Corp. | precision tools

Track Cutter
Walthers Part # 791-90028

Xuron Track Cutters are suitable for use with HO, N and Z Scale nickel silver rail. The Track Cutter provides clean, flat cuts to speed laying track. Track Cutters are part of the line of Xuron cutters and pliers.