Shipping Policy

Adapter board, 18-pin Next-18 socket to NEM652 8-pin, Flex, 88mm, with heat shrink tube

Adapter board, 18-pin Next-18 socket to Plux16

Adapter board, 18-pin Next-18 socket to PluX12, Flex, 88mm

This adapter board can be docked to all decoders with Next18 connector and offers a PluX12 interface on the locomotive side. The Flex PCB can be folded and extended to length almost as desired. The adapter board comes with shrink tubing and speaker connection cables.

This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was installed there, but the required length for a LokSound 5 decoder was not taken into account. With the help of this adapter board, a LokSound 5 micro can be used horizontally in the available installation space. If the width is 21mm, these locomotives can now also be easily converted to LokSound.

Example Dimensions with LokSound 5 micro 58818 plugged in: total width 21.5mm x 19mm length.

The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to hard-wire the decoder. The board is extremely small with dimensions of only 13.0 mm x 9.0 mm. The mounting tabs can also be broken away for tighter fit applications. Functions AUX3 and AUX4, logic outputs, are both amplified (each about 180mA). In total, up to 6 outputs can be used.

Soldered connection cables with a length of approx. 20 cm.

Dimensions: Length 13.0 mm x 9.0 mm (With mounting tongue: 18.0 mm x 9.0 mm).

What the LokProgrammer can do:

If necessary, you can add the Decoder Tester Extension to your Profi Decoder Tester V2.0: Plugged into the side of the Decoder Tester V2.0 it enables you to comfortably test all large scale decoders.

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders.

With its energy storage (1 Farad capacity) the unit supplies power to all light and motor functions as well as to the sound module. Subject to the energy consumption of your model it may continue to move for up to three seconds. 

The ESU PowerPack Midi can be wired to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic). It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders.

The ESU PowerPack MiniXS can be wired to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic). It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders.

The LokSound 5 Fx is a special edition of the LokSound family. It has no motor output and is specially designed for use in cab control cars and other cars that require sound but do not have a propulsion (motor) themselves.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 Fx is a special edition of the LokSound family. It has no motor output and is specially designed for use in cab control cars and other cars that require sound but do not have a propulsion (motor) themselves.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

LokSound 5 L is intended for use in all applications where the required power exceeds the limits of LokSound 5. Ideally these are 0 gauge vehicles and also smaller 1 gauge locomotives. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 L DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct has been specially developed for installation in N scale locomotives by Atlas and Intermountain. It can be inserted directly instead of the analog board installed there as standard.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato Japan has been specially developed for installation in Kato-branded track N vehicles.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in N scale vehicles by Kato USA. This decoder can replace the analog board installed as standard on most N scale locomotives by Kato USA. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shopping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct has been specially developed for installation in N gauge locomotives of the Atlas and Intermountain brands manufactured pre 2016. It can be inserted directly instead of the analog board installed as standard.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA SC44 was specially developed for installation in some Kato USA N gauge vehicles: It fits in all Kato N scale locomotives Siemens SC44 “Charger” or MP36 instead of the standard analog board. 

........................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA SD90 was specially developed for installation in some Kato USA N gauge vehicles like the SD90, SD90/43MAC, SD80MAC. and SD70ACu models instead of the standard analog board. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC decoder is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

With its unique design the LokSound 5 Direct DCC can easily replace boards that provide poor motor control, low volume, or generally inferior sound. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC decoder is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

Please note the LokSound 5 DCC decoder does not come with a speaker.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The NEW LokSound 5 DCC Direct, with integrated PowerPack, can easily replace boards that provide poor motor control, low volume, or generally inferior sound. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

LokSound 5 Nano DCC - ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT

LokSound 5 Nano DCC with single wires has a size of 19.6mm x 8.5mm x 5.3mm

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

LokSound 5 Nano DCC - ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT

LokSound 5 Nano DCC with E24 interface has a size of 19.6mm x 8.5mm x 3.2mm

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

LokSound 5 Nano DCC - ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT.

LokSound 5 Nano DCC with Next18 interface has a size of 15mm x 9.5mm x 3.5mm

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA Widebody has been specially developed for installation in wide body N gauge locomotives by Kato USA brand. These models may also be easily retrofitted with a LokSound decoder.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokPilot 5 Basic is a "pure-bred" DCC decoder.

While LokPilot 5 decoders can undoubtedly meet all requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.

The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.

The LokPilot 5 Basic is a "pure-bred" DCC decoder.

While LokPilot 5 decoders can undoubtedly meet all requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.

The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.

The LokPilot 5 L finds its place wherever the LokPilot 5 no longer “fits” in terms of performance. Ideally, these are vehicles of nominal size 0, but also gauge 1 vehicles that are to be equipped without noise are conceivable application scenarios. The LokPilot 5 L is mechanically compatible with the LokSound 5 L decoder and has the same connection pins.

The LokPilot 5 L decoder is always equipped with pin headers and is delivered ex works with an adapter board that has solder termination points.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 is a true multi-protocol decoder.; DCC, Motorola®, Selectrix® and M4.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

"MKL" for Märklin by ESU. Many newer Märklin locomotives and some British locomotives with a 21-pin interface, may not adhere to the standard design of the 21MTC interface. These locomotives require amplified signals at the AUX3 and AUX4 outputs which you will get with "MKL" decoders.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 DCC is a "pure-bred" DCC decoder. with 14 to 128 speed steps and 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

"MKL" for Märklin by ESU; Many newer Märklin locomotives and some British locomotives with a 21-pin interface, may not adhere to the standard design of the 21MTC interface. These locomotives require amplified signals at the AUX3 and AUX4 outputs which you will get with "MKL" decoders.

The LokPilot 5 micro DCC Direct is the “twin” of the LokSound 5 Nano DCC. With its dimensions of 66.0mm x 8.2mm it has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.

The LokPilot 5 micro DCC Direct Kato USA has been specially developed for installation in N scale locomotives of the Kato USA brand. This decoder can be easily installed in most American diesel locomotives of this manufacturer instead of the analog board installed as standard.

The LokPilot 5 micro DCC Direct Kato USA with its dimensions of 60.0mm x 10.1mm is a pure DCC decoder.

The LokPilot 5 micro DCC Direct Atlas Legacy has been specially developed for installation in N gauge locomotives of the Atlas and InterMountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.

The LokPilot 5 micro DCC Direct Atlas Legacy is also a “direct style" decoder developed for early (before 2016) Atlas, InterMountain (and others). The decoder was made for locos produced before sound was added during production.

The LokPilot 5 micro DCC Direct Atlas Legacy is the twin to the LokSound 5 micro DCC Direct Atlas Legacy and shares the same dimensions of 66.0mm x 8.2mm.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

he LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano DCC is equipped with the E24 interface, which will fit into many newly released N gauge locomotives.

The LokPilot 5 micro DCC Direct Kato USA Widebody is the “twin” of the LokSound 5 micro DCC Direct Kato USA Widebody.

With its dimensions of 47.5mm x 14.0mm x 4.5mm it has been specially developed for installation in wide body N gauge locomotives of the Kato USA brand: Most diesel locomotives of this manufacturer come with only a common DC lighting board. Finally, these models can also be easily retrofitted with a LokPilot 5 Decoder.

The LokSound V4.0 M4 is the world´s first Quad-protocol decoder! Aside from DCC, Motorola® and Selectrix®, all incorporated into the LokSound V4.0, the LokSound V4.0 M4 also speaks the M4 protocol! Thus the decoder is a 100% compatible to all mfx®-capable command stations on the market. It will be automatically recognised and can be fully programmed.. That´s why the decoder is “first choice” for all Märklin fans who do not want to miss out on mfx®.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Semi-Scale Wheelsets, .540” axle: ATH, BLMA, FVM, MT, SXT, TWX
28" Wheel - Quantity of 12

Semi-scale wheelsets have a narrow tread profile with fine side contour for a more realistic appearance, especially when used with super-detailed freight and passenger cars. Semi-scale wheelsets work best on most handlaid track and finer brands of Code 55 track sections. Narrow tread wheelsets can drop into wide gauge rails and frogs so be sure to test on your railroad before purchasing large quantities.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Standard Wheelsets, .540” axle: ATH, BLMA, FVM, MT, SXT, TWX
28" Wheel - Quantity of 12

Standard wheelsets have a wider tread profile than their semi-scale counterpart while still maintaining the fine side contour. The finely tapered axles reduce friction for better performance and are a direct replacement for Fox Valley Models, Rivet Counter, and other fine brands of freight and passenger cars. These wheelsets run well on most commercial track brands as well as handlaid track.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Semi-Scale Wheelsets, .540” axle: ATH, BLMA, FVM, MT, SXT, TWX
33" Wheel - Quantity of 12

Semi-scale wheelsets have a narrow tread profile with fine side contour for a more realistic appearance, especially when used with super-detailed freight and passenger cars. Semi-scale wheelsets work best on most handlaid track and finer brands of Code 55 track sections. Narrow tread wheelsets can drop into wide gauge rails and frogs so be sure to test on your railroad before purchasing large quantities.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Semi-Scale Wheelsets, .553” axle: ATL, CC, IMR, MDC
33" Wheel - Quantity of 12

Semi-scale wheelsets have a narrow tread profile with fine side contour for a more realistic appearance, especially when used with super-detailed freight and passenger cars. Semi-scale wheelsets work best on most handlaid track and finer brands of Code 55 track sections. Narrow tread wheelsets can drop into wide gauge rails and frogs so be sure to test on your railroad before purchasing large quantities.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Standard Wheelsets, .540” axle: ATH, BLMA, FVM, MT, SXT, TWX
33" Wheel - Quantity of 12

Standard wheelsets have a wider tread profile than their semi-scale counterpart while still maintaining the fine side contour. The finely tapered axles reduce friction for better performance and are a direct replacement for Fox Valley Models, Rivet Counter, and other fine brands of freight and passenger cars. These wheelsets run well on most commercial track brands as well as handlaid track.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Standard Wheelsets, .553” axle: ATL, CC, IMR, MDC
33" Wheel - Quantity of 12

Standard wheelsets have a wider tread profile than their semi-scale counterpart while still maintaining the fine side contour. The finely tapered axles reduce friction for better performance and are a direct replacement for Fox Valley Models, Rivet Counter, and other fine brands of freight and passenger cars. These wheelsets run well on most commercial track brands as well as handlaid track.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Semi-Scale Wheelsets, .540” axle: ATH, BLMA, FVM, MT, SXT, TWX
36" Wheel - Quantity of 12

Semi-scale wheelsets have a narrow tread profile with fine side contour for a more realistic appearance, especially when used with super-detailed freight and passenger cars. Semi-scale wheelsets work best on most handlaid track and finer brands of Code 55 track sections. Narrow tread wheelsets can drop into wide gauge rails and frogs so be sure to test on your railroad before purchasing large quantities.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Semi-Scale Wheelsets, .553” axle: ATL, CC, IMR, MDC
36" Wheel - Quantity of 12

Semi-scale wheelsets have a narrow tread profile with fine side contour for a more realistic appearance, especially when used with super-detailed freight and passenger cars. Semi-scale wheelsets work best on most handlaid track and finer brands of Code 55 track sections. Narrow tread wheelsets can drop into wide gauge rails and frogs so be sure to test on your railroad before purchasing large quantities.

Fox Valley Models | N-scale (1:160) | wheels and trucks 

Semi-Scale Wheelsets, .563” axle: Older Riv
36" Wheel - Quantity of 12

Semi-scale wheelsets have a narrow tread profile with fine side contour for a more realistic appearance, especially when used with super-detailed freight and passenger cars. Semi-scale wheelsets work best on most handlaid track and finer brands of Code 55 track sections. Narrow tread wheelsets can drop into wide gauge rails and frogs so be sure to test on your railroad before purchasing large quantities.