Märklin accessories

Active filters

CA$24.97
CA$28.34 -11.86%
There are not enough products in stock

This book is an extensive description of the Märklin Digital system. It contains all of the essential information about the Central Station 3 with Software Version 2.0. Focal points are control with the Central Station 3, conversion to digital locomotive operation, tips for automated processes. 190 pages in the DIN A4 format. English language version.

CA$28.35
CA$32.39 -12.46%
In Stock

In over 160 pages, you get extensive tips for building a layout including essential information about track geometry, layout control, and accessories. An ideal handbook for designing and building a modern track layout. In addition, there are numerous suggestions for updating existing layouts and taking them into the digital world. There are also 25 track plans for C and K Track included in this handbook.

CA$172.80
CA$216.00 -20%
In Stock

This WLAN receiver box is for wireless control using the MS WLAN (60667 WLAN Mobile Station) or the Infrared Controller supplied in some Starter Sets. It serves as an adapter for operation with the Digital Connector Box (60114, 60116) or a Central Station (60216, 60226, as well as 60213-60215). This unit allows you to couple the MS WLAN (60667) or the Start-Up infrared controllers with these devices to control your locomotives and other devices.

CA$26.99
CA$29.69 -9.1%
Special Order (email us for availability)

This is a 10-pin to 7-pin adapter cable for connecting a the 60653 Mobile Station, the 60652 Mobile Station, and the 66950 Trix Mobile Station to the 60125 Terminal and a 3rd Mobile Station to the 60213-60215 Central Stations.

This cable can also be used to connect a second 60652 Mobile Station to the 24088 feeder track or to the 60115 Connector Box (H0) or 60111 Connector Box (Märklin 1).

CA$244.35
CA$297.00 -17.73%
There are not enough products in stock

The Connect-6021 is for bidirectional connections between the former Märklin Digital System and the 60213-60215 and 60216/60226 Central Station. This allows you to control 80 locomotives (Motorola format as well as mfx) with the 6021 Control Unit, control locomotive auxiliary functions (function, F1 – F4), control solenoid accessories with synchronized display of their settings.

This connection also allows you to use the 6043 memory as well as the memory functionality of the 60213-60215 and 60216/60226 Central Station. Connections on the back side: M-Bus cable (for connections to the 60213-60215 and 60216/60226). Side connections: Multi-pin strip connector for connections to the "6021 world". Dimensions 135 x 120 x 80 mm / 5-5/16" x 4-3/4" x 3-1/8".

CA$137.70
CA$175.50 -21.54%
In Stock

This is a digital hand control unit (mfx and DCC). 11 locomotives can be controlled with direct access by selecting locomotive profiles stored in a quick access list. These profiles can be built manually (DCC or mfx digital address, locomotive icons and various function icons), by accessing built-in Märklin Digital locomotive database, or automatically for locomotives with digital decoders in the mfx format. 

Note: The Mobile Station need to be connected to a Connector Box (sold separately): 60116 or 60113 for HO or N-scale or the 60112 for 1 Gauge. The Connector Box will need a power supply like the 66367 (sold separately). The connector box is then supplying both power and digital signals to your track and accessories by two wires.

CA$67.50
CA$78.29 -13.78%
Special Order (email us for availability)

This is a set for installation in a locomotive and comes with a controlled digital decoder and a powerful motor (conversion kit). It will fit into most Märklin H0 locomotives with drum-style commutator motors. The decoder has 80 programmable addresses, automatic switching between the modes of operation, a load compensation feature, and a digitally controlled connection for headlights / marker lights that change over with the direction of travel. The acceleration and braking delay can be controlled with a 6021 Control Unit or with Märklin Digital. The motor has a 5-pole armature, a powerful permanent magnet field, and a pre-installed bearing plate. Installation hardware is included.

Decoder dimensions 25 x 17 x 6 mm / 1" x 11/16" x 1/4".

CA$64.79
CA$80.99 -20%
There are not enough products in stock

This is for converting Märklin locomotives with built-in AC/DC / field coil motors. The AC/DC märklin locomotive decoder supports the digital formats mfx, MM1, MM2, and DCC. It has particularly powerful function outputs for old Telex couplers, light bulbs, and smoke generators. The classic unregulated running behavior under different loads remains preserved on "Old and Youngtimers" upgraded with this decoder.

CA$53.99
CA$67.49 -20%
There are not enough products in stock

This decoder is for converting Märklin/Trix H0 locomotives with built-in high-efficiency motors or other DC motors. The märklin LokDecoder mLD3 has a wiring harness soldered to it. The märklin LokDecoder mLD3 supports the digital formats mfx, MM1, MM2, and DCC. A plug for NEM 652 interface connectors is included for do-it-yourself soldering.

CA$75.59
CA$94.49 -20%
In Stock

This switched mode power pack is for connecting to and supplying power to the Märklin 60114 or 60116 Track Box but suitable for many other applications requiring power compatible with this unit.

The input is 120 volts / 60 Hertz

The output 18 volts / 36 watts DC voltage. 

Dimensions 85 x 55 x 74 mm / 3-3/8" x 2-1/8" x 2-7/8".

Connections: Hollow socket 5.5/2.5 mm, positive conductor inside.

The switched mode power pack is authorized for use as a toy and comes in a plastic housing. The 66367 switched mode power pack is designed for use only indoors.

CA$18.90
CA$19.56 -3.38%
Temporarily not in stock (email ishop@hobbytech for availability)

Close Coupler Heads for Standard Coupler Pockets, 10 Pieces

This new close coupler head is specially planned for newly designed locomotives with prototypically lower buffer beams and thereby lower buffer heights above the top edge of the rail (according to NEM 303). This is to ensure the required freedom of movement for the coupler system below the buffer plates. This new close coupler head is compatible with all available Märklin couplers.