Shipping Policy

Gauge H0 - Article No. 74030
Center Rail Insulators for Märklin and TRIX C-track

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39".

The 74040 feeder wire is not suitable if interference suppressor is required. If so yo may use the 74046 Feeder wire set with interference suppressor.

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free LEDs.

This is for retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left, or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. The lights for the lanterns are maintenance-free warm white LEDs.

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

Gauge H0 - Article No. 74990
Track Screws for Märklin and TRIX C-track

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

Märklin System C-Track | Light Mast for the Uncoupler Track

The light mast can be plugged into the Märklin 24997 C Track or TRX 62997 C-track (DC). The mast signal lights up when the uncoupler track is activated. Metal mast. Height 85 mm / 3-38". This light mast is technically the same as the earlier 5113 mast.

Micro Engineering | HO scale (1:87) | track accessories

Code 83 Standard Gauge Flex-Track™

Nonweathered 3' pkg(6)

Micro Engineering | HO scale (1:87) | track accessories

Code 70 Standard Gauge Flex-Track(TM)

Nonweathered 3' pkg(6)

Micro Engineering | HO scale (1:87) | track accessories

Code 87 Weathered Standard Gauge Flex-Track™

Weathered 3' pkg(6)

Automatically change polarity of your reverse loop or reversing section.

Pan Pastel | all scales | track accessories

7-Color Modeler's Weathering Kit -- Rust & Earth

These custom color sets make it easy to age and weather all types of models in any scale. Sets include seven colors, a palette tray for blending and Sofft tools for application.

Pan Pastel | all scales | track accessories

7-Color Modeler's Weathering Kit -- Grays, Grime & Soot

These custom color sets make it easy to age and weather all types of models in any scale. Sets include seven colors, a palette tray for blending and Soft tools for application.

PECO | HO (1:87) | all track

Code 100 Rail Joiners

Walthers Part # 552-SL10

PECO | HO (1:87) | Code 100 track

Code 100 Flex track with wooden ties: 36" / 91.4cm Section
25 pieces (25 pack)

Walthers Part # 552-SL100

PECO | HO (1:87) | Code 100 track

Code 100 Flex track with wooden ties: 36" / 91.4cm Section
5 pieces (5 pack)

Walthers Part # 552-SL100

PECO | HO (1:87) | all track

Code 70/75/83 Rail Joiners

Walthers Part # 552-SL110

PECO | HO (1:87) | all track

Track Nails
14mm, chemically blackened mild steel.

- Length: 14mm
- All PECO Flexible track systems
- approx. 250 pieces
- 1/4oz / 7.1g

Walthers Part # 552-SL14

Single Slip, Insulfrog - New Design
Walthers Part # 552-SL80
HO scale

36" 91.4cm Section - Code 83 flex track - 25PK
Walthers Part # 552-SL8300
HO scale
 
Peco HO Scale Code 83 track components are based on American Railroad Engineering Association drawings, and have been designed to meet NMRA standards. This line of track is an all-new addition to Peco's dependable and durable track systems.

36" 91.4cm Section - Code 83 flex track - 5PK
Walthers Part # 552-SL8300
HO scale
 
Peco HO Scale Code 83 track components are based on American Railroad Engineering Association drawings, and have been designed to meet NMRA standards. This line of track is an all-new addition to Peco's dependable and durable track systems.

PECO | HO (1:87) | 

Typical American style buffer with central buffing plate, clips between the rails.

KIT - 2 pack

For Code 83, 100 and 75 track systems

PECO | HO (1:87) Code 83 track

Code 83 #4 Wye Turnout -- Insulfrog

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

PECO | HO (1:87) | Code 83 track

Code 83 #5 Turnout - Streamline -- Right Hand, Insulfrog

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

PECO | HO (1:87) | Code 83 track

Code 83 #5 Turnout - Streamline -- Left Hand, Insulfrog

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

PECO | HO (1:87) | Code 83 track

Code 83 #7 Turnout - Streamline -- Right Hand, Insulfrog

#7 Curved Turnouts from Peco are necessary additions to your track planning. Peco Code 83 track is designed to look just like mainline track used across North America. Turnouts feature insulated or powered frogs and positively sprung points for good contact. Turnouts are easily converted to remote operation with under-track turnout motor 552-3010 or any after market turnout motor of your choice (sold separately)

PECO | HO (1:87) | Code 83 track

Code 83 #7 Turnout - Streamline -- Left Hand, Insulfrog

#7 Curved Turnouts from Peco are necessary additions to your track planning. Peco Code 83 track is designed to look just like mainline track used across North America. Turnouts feature insulated or powered frogs and positively sprung points for good contact. Turnouts are easily converted to remote operation with under-track turnout motor 552-3010 or any after market turnout motor of your choice (sold separately)

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Curved Double Radius Turnout - Streamline -- Right Hand, Insulfrog

Walthers Part # 552-SL86 HO scale

Nominal radius - outside: 60" (1524mm), inside 30" (762mm); length: 10-5/32" (256mm).

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Curved Double Radius Turnout - Streamline -- Left Hand, Insulfrog

Walthers Part # 552-SL87 HO scale

Nominal radius - outside: 60" (1524mm), inside 30" (762mm); length: 10-5/32" (256mm).

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Large Radius Turnout - Streamline -- Right Hand, Insulfrog

Walthers Part # 552-SL88 HO scale 

Nominal radius: 60" (1524mm), angle: 12 degrees; length: 10-5/32" (258mm).

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Large Radius Turnout - Streamline -- Left Hand, Insulfrog

Walthers Part # 552-SL89 HO scale 

Nominal radius: 60" (1524mm), angle: 12 degrees; length: 10-5/32" (258mm).

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Double Slip Turnout - Streamline -- Insulfrog

Length: 249mm -- Frog Angle: 12 Degrees

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Small Radius Turnout - Streamline -- Right Hand, Insulfrog

Nominal radius: 24" (610mm); angle: 12 degrees; length: 7-9/32" (185mm).

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Small Radius Turnout - Streamline -- Right Hand, Insulfrog

Nominal radius: 24" (610mm); angle: 12 degrees; length: 7-9/32" (185mm).

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Streamline Crossing -- Short, Insulfrog

- 24-Degrees - 18" 45.7cm

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Streamline Crossing -- Long, Insulfrog

- 12-Degrees

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Medium Radius Turnout - Streamline -- Right Hand, Insulfrog

Nominal radius: 36" (914mm); angle: 12 degrees; length: 8-5/8" (219mm)

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Medium Radius Turnout - Streamline -- Left Hand, Insulfrog

Nominal radius: 36" (914mm); angle: 12 degrees; length: 8-5/8" (219mm)

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Small Radius Wye Turnout - Streamline -- Insulfrog

Nominal radius: 24" (610mm); Angle: 24 degrees; Length: 5-13/16" (148mm)

PECO Streamline | HO scale (1:87) | Code 100 track

Code 100 Small Radius Wye Turnout - Streamline -- Insulfrog

Nominal radius: 36" (914mm); angle: 12 degrees; length: 8-21/32" (220mm)

PECO | HO (1:87) | Code 83 track

Code 83 #5 Turnout - Streamline -- Right Hand, Electrofrog

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

PECO | HO (1:87) | Code 83 track

Code 83 #5 Turnout - Streamline -- Left Hand, Electrofrog

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

PECO | HO (1:87) | Code 83 track

Code 83 #7 Turnout - Streamline -- Right Hand, Electrofrog

#7 Curved Turnouts from Peco are necessary additions to your track planning. Peco Code 83 track is designed to look just like mainline track used across North America. Turnouts feature insulated or powered frogs and positively sprung points for good contact. Turnouts are easily converted to remote operation with under-track turnout motor 552-3010 or any after market turnout motor of your choice (sold separately)

PECO | HO (1:87) | Code 83 track

Code 83 #7 Turnout - Streamline -- Left Hand, Electrofrog

#7 Curved Turnouts from Peco are necessary additions to your track planning. Peco Code 83 track is designed to look just like mainline track used across North America. Turnouts feature insulated or powered frogs and positively sprung points for good contact. Turnouts are easily converted to remote operation with under-track turnout motor 552-3010 or any after market turnout motor of your choice (sold separately)

PECO | HO (1:87) | Code 83 track

Code 83 #8 Turnout - Streamline -- Right Hand, Electrofrog

HO Scale Code 83 turnouts from Peco add more track options for modelers who use Code 83 track. Based on American Railroad Engineering Association drawings, these turnouts have been designed to meet NMRA standards. Peco Code 83 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details. All track and turnouts feature the correct prototypical tie spacing and all are DCC friendly.

PECO | HO (1:87) | Code 83 track

Code 83 #8 Turnout - Streamline -- Left Hand, Electrofrog

HO Scale Code 83 turnouts from Peco add more track options for modelers who use Code 83 track. Based on American Railroad Engineering Association drawings, these turnouts have been designed to meet NMRA standards. Peco Code 83 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details. All track and turnouts feature the correct prototypical tie spacing and all are DCC friendly.

PECO Streamline | HO scale | CODE 100 track

Curved Turnout, Small Radius, Right

PECO Streamline | HO scale | CODE 100 track

Curved Turnout, Small Radius, Left

Code 83 - North American Style | PECO Streamline
#6 Turnout, Right Hand - Unifrog

Peco HO Scale Code 83 track components are based on American Railroad Engineering Association drawings, and have been designed to meet NMRA standards. This line of track is an all-new addition to Peco's dependable and durable track systems.

Code 83 - North American Style | PECO Streamline
#6 Turnout, Left Hand - Unifrog

Peco HO Scale Code 83 track components are based on American Railroad Engineering Association drawings, and have been designed to meet NMRA standards. This line of track is an all-new addition to Peco's dependable and durable track systems.

PECO | HO (1:87) Code 83 track

Code 83 #4 Wye Turnout -- Electrofrog

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

37" / 940 mm Section - Code 100 flex track
HO scale

The PIKO flex track, 940 mm, corresponds to 2 x module length of 470.0 mm - without rail connector.=

PIKO 55271 |  Electric Switch Machine
HO scale

 
Electric turnout drive for all switches, low current consumption. (Incl. 2 screws)

PIKO | HO scale (1:87) | A-track with Roadbed

Connection clip without EMC suppression element for digital (DCC) layouts.

Suitable for PIKO A Track Straight G231 (item no.: 55201 or 55406)

PIKO | HO scale (1:87) | A-track with Roadbed

Bumper

Bumper with wooden planks, can be plugged or screwed onto any straight rail.

PIKO 55281 | Track Cleaning Block
HO and N scale

Dimensions: 60 x 35 x 15mm / 2.35 x 1.4 x 0.6"

For regular use to scrub your track to help ensure good power conductivity between the track and your locomotive or other units on your track requiring power.

PIKO | HO scale (1:87) | A-track with Roadbed | Code 100

Metal Rail Joiners, 24 pcs

Spring steel rail connector, 24 pieces

PIKO | HO scale (1:87) | A-track with Roadbed | Code 100

Insulated Rail Joiners, 24 pcs

Plastic insulating rail connector, 24 pieces

PIKO | HO scale (1:87) | A-track with Roadbed

Terminal Joiners

Spring steel rail connector with connection cable, 1 pair

PIKO | HO scale (1:87) | A-track with Roadbed | Code 100

Code 100 - Code 83 Rail Conversion Joiners, 6 pcs

Spring steel rail connectors with level compensation, allow a transition to ROCO*-Line and other Code 83 track, 6 pieces

For a transition from PIKO A-track to tracks from manufacturers with a profile height of 2.1 mm, rail connectors are necessary, which make the level compensation between the different profile heights. For such a connection, these rail connectors (item no. 55294) must be exchanged for the existing ones at the transition point.

PIKO | HO scale (1:87) | A-track with Roadbed | Code 100

Track Screws, Approx. 400 pcs.

Track fastening screws (cross recess) 1.46 mm x 10 mm, approx. 400 pieces

PIKO | HO scale (1:87) | A-track with Roadbed | Code 100

Track Nails, Approx. 400 pcs.

Track - Nails, about 400 pieces
.1.0 x 14 mm

Add more fun the A-Track Extension Set. The set contains a turn-out, straight track and track bumper so you can safely park some cars on the siding while the train is making its way on the mainline.

Increase the capacity of your lay-out to run two trains. Allow your train to stop and wait while the other train is passing.

PIKO (HO-scale) Article no. 55400 (G239)
Box of 6 Roadbed A-Track Straight, 239mm/9.4"

Length: 239mm / 9.4"
G239 + G231 give the modulus length of 470mm / 18.5"

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO | HO scale (1:87) | A-track with Roadbed

55401 Box of 6 PIKO Roadbed A-Track Straight, 231mm/9.1"

PIKO (HO-scale) Article no. 55403 (G115)
Box of 6 Roadbed A-Track Straight

Length: 115mm/4.52" (HO-Scale)

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO | HO scale (1:87) | A-track with Roadbed

Straight Track G231 for Connection-Clip PU6

Straight track with a length of 231 mm for the 55270 connection clips for analog layouts or 55275 for digital layouts (not included). The track also has a cutout for the 55447 bedding base for these connection clips (not included).

PIKO (HO-scale) Article no. 55411
Box of 6 Roadbed A-Track

R1 Curve: Radius = 360mm / 14.2"
Each 55411 curve is 30°
12 pieces completes a circle

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO (HO-scale) Article no. 55412
Box of 6 Roadbed A-Track

R2 Curve: Radius = 421.8mm / 16.6"
Each 55412 curve is 30°
12 pieces completes a circle

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO (HO-scale) Article no. 55413
Box of 6 Roadbed A-Track

R3 Curve: Radius = 484mm / 19"
Each 55413 curve is 30°
12 pieces completes a circle

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO (HO-scale) Article no. 55414
Box of 6 Roadbed A-Track

A-Track with Roadbed, Curved Track
R4 Curve: Radius = 546mm / 21.4"
Each 55414 curve is 30°, 12 pieces completes a circle

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO (HO-scale) Article no. 55417
Box of 6 Roadbed A-Track Curved

R1 Curve: Radius = 360mm / 14.2"

Each 55417 curve is 7.5°

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6

PIKO (HO-scale) Article no. 55418
Box of 6 Roadbed A-Track Curved

R1 Curve: Radius = 421.8mm / 16.6"

Each 55418 curve is 7.5°

HO-Scale Roadbed A-Track sections can be purchased in boxes of 6