---------
HobbyTech will be closed
Thursday through Tuesday
(April 23 - April 28)
to attend Supertrain 2026
HobbyTech is no longer accepting orders from US customers through the website. The primary reason is that customs charges have to be calculated and prepared for you manually. The courier companies requires that tariffs, taxes and fees are collected in advance.
Please place your orders by email. We will prepare your order and forward your total cost including customs duties and shipping cost for delivery by a courier like UPS, FedEx and Purolator.
US tariff refers to the import duties and fees applied to goods entering the U.S., which vary based on the product, its country of origin, and recent policy changes. The US administration has recently eliminated its de minimis exemption for most shipments, meaning all shipments may now be subject to taxes and fees including but not limited to brokerage charges. The duties are cost to be paid by the US consumer and must in most cases be paid in advance through the carrier used to import your goods.
We ship world wide with Canada Post* at cost + $4 Handling Charge . Courier service is also available within Canada.
We do NOT offer Free Shipping. Pick-Up in store is defined as a shipping option and is of course at no charge. As this is the lowest cost option it is also the default by the website. Hence you may see Free Shipping during check-out till you have chosen your shipping option. Shipping by Canada Post or a courier service will always be at a charge.
We ship FOB Origin: The buyer (customer) assumes full responsibility of the goods once it has been picked up by the carrier.
Insurance: Up to 100 CAD (about $70 USD) coverage is included with the shipping. Any shortfall in the event of a loss or damage to your parcel is deemed to be self-insured by you, the recipient. Additional coverage may be available at a cost of $2.80 CAD ($2.00 USD) per increment of $100 CAD (about $70 USD). Please let us know that you would like to add insurance and we will add if available on your shipping option before charges are processed.
We pack well to protect your items during transit. Should you want extra padding just let us know. Keep in mind, that will increase the parcel volume and with that also your cost.
*Some countries are excluded by our website as Canada Post with its international partners only offer limited shipping options. However, you may order by email and we will process your order manually. Keep in mind that shipping might be expensive.
The website can process the order in USD or CAD currency. The currency selector is placed in the upper right corner on this page.
US and International customers can complete the shopping cart in USD and pay by PayPal. If you prefer CAD then the payment can only be by Bank Wire (EFT/ACH). If you prefer to pay by Credit Card then select PayPal and use your credit card as the source of payment.
Canadian Customers can complete the order in either CAD or USD currency. If you select CAD then you have the options to pay by VISA, MasterCard or Interac e-Transfer. We also accept EFT/ACH.
We are unfortunately not setup to accept Debit cards like VISA Debit or MasterCard Debit through the website. However, you can pay with Debit / Interac In-Store.
If you would like to use funds on your PayPal account, then make sure to select USD as the currency in the upper right corner of the website.
Interac e-Transfer is preferred. If you elect to pay by Interac e-Transfer (CAD), then do not send the funds yet. We will verify that all items are in stock and email you an invoice with payment instructions. You will also get a 1.5% credit (savings) on your order for paying by Interac e-Transfer.
You can also pay by CASH (in-store) if you are picking up your order within 5 days.
Money Orders are accepted with a surcharge to cover handling cost. Please email us for details.
IMPORTANT NOTE: The website will not automatically charge your Credit Card or PayPal account. You merely authorize the charges. We will verify that all is in stock and communicate with you in case of any variations. When all is in order we will process the payment.
We do not take any item back for a refund or exchange for any reason whatsoever. However, we may consider to buy back your surplus item. The discount will depend on the item and condition. Please email us to negotiate.
All warranty claims rests with the respective manufacturer and is subject to its terms and conditions accordingly. Please visit the manufacturer website for details and procedures regarding your claim. HobbyTech do not offer a supplemental warranty program. Nor is HobbyTech, or any other dealer, authorized to act on behalf of the manufacturer. However, on your request, HobbyTech is happy to act on your behalf and can help coordinate and facilitate your warranty claim. You can therefore either contact the manufacturer directly or ask HobbyTech for assistance. You may do so by email providing all relevant details regarding your item, symptoms and defects observed. We will then contact the manufacturer on your behalf and coordinate the warranty claim. You may be asked to ship your item to them or to HobbyTech at your cost. Return shipping is likely covered by the manufacturer. HobbyTech will and cannot assume any liability regarding your warranty item.
It is inevitable that mistakes can happen even though we are making the best effort to provide accurate and relevant information herein. You may need to verify with the manufacturer official website to ensure yourself that you in fact are making the purchase of the item intended and the specifications are as expected. Accordingly, we will not take an item back due to but not limited to incorrect item number, incorrect road number or incorrect item description. Should you be in doubt or have discovered that our information is inconsistent with the manufacturer we welcome your feedback. HobbyTech will not be held liable for any loss due to errors or omissions on this website.
HobbyTech reserves the right to correct pricing before finalizing the sale due to but not limited to price increase by the manufacturer or supplier, currency exchange variations or increase in logistical cost like shipping and handling. Should an error be discovered after the sale is finalized we do expect that you will make good on any shortfall we can document or return the item to us. Examples of this could be that we did charge you for a DC model while you did get a DCC/sound unit, we did not charge applicable tax or charged you incorrectly for shipping. Likewise, HobbyTech will refund any overcharge due to our error.
There are 381 products.
PIKO (HO-scale) Article no. 55413
Box of 6 Roadbed A-Track
R3 Curve: Radius = 484mm / 19"
Each 55413 curve is 30°
12 pieces completes a circle
HO-Scale Roadbed A-Track sections can be purchased in boxes of 6
PIKO (HO-scale) Article no. 55414
Box of 6 Roadbed A-Track
A-Track with Roadbed, Curved Track
R4 Curve: Radius = 546mm / 21.4"
Each 55414 curve is 30°, 12 pieces completes a circle
HO-Scale Roadbed A-Track sections can be purchased in boxes of 6
PIKO (HO-scale) Article no. 55417
Box of 6 Roadbed A-Track Curved
R1 Curve: Radius = 360mm / 14.2"
Each 55417 curve is 7.5°
HO-Scale Roadbed A-Track sections can be purchased in boxes of 6
PIKO (HO-scale) Article no. 55418
Box of 6 Roadbed A-Track Curved
R1 Curve: Radius = 421.8mm / 16.6"
Each 55418 curve is 7.5°
HO-Scale Roadbed A-Track sections can be purchased in boxes of 6
PIKO (HO-scale) Article no. 55419
Box of 6 Roadbed A-Track
A-Track with Roadbed, Curved Track, R9/15°
HO-Scale Roadbed A-Track sections can be purchased in boxes of 6
PIKO | HO (1:87) | A-track Code 100 with Roadbed
WL turnout, left, angle 15°, straight track = G239,branch = R9, manual operation with positioning.
PIKO A" track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
WR turnout, right, angle 15°, straight track = G239,branch = R9, manual operation with positioning.
PIKO A" track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
BWL curved turnout, left, R2 to R3, radius of the main or branch track R2. Manual operation with positioning
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
BWR curved turnout, right., R2 to R3, radius of the main or branch track R2. Manual operation with positioning.
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
Double Slip Switch DKW. Manual operation with positioning
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
Three-way turnout with 15° branches each (W3). Manual operation with positioning.
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
WY Y turnout (WY). Manual operation with positioning.
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
BWL curved turnout, left, R3 to R4 or R4 to R5, radius of the main or branch track R3. Manual operation with positioning
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
BWL curved turnout, right, R3 to R4 or R4 to R5, radius of the main or branch track R3. Manual operation with positioning
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
Turnout motor: 55271 (sold separately)
PIKO | HO (1:87) | A-track Code 100 with Roadbed
Crossing 15° (K15)
PIKO A track with ballast, finely detailed ties, and realistic, sharp-edged ballast reproduction and color scheme.
PIKO | HO scale (1:87) | A-track with Roadbed
Roadbed for left and right turnout drive (mechanism)
PIKO A Track bedding base for turnout mechanisms, with realistic stone structure. Can be plugged into the embankment of turnouts on the left (55420) and right (55421)
PIKO | HO scale (1:87) | A-track with Roadbed
Roadbed for left curved turnout drive (mechanism)
PIKO A Track ballast base for turnout mechanisms, with realistic stone structure. Can be plugged onto the embankment of curved left turnouts (55422).
PIKO | HO scale (1:87) | A-track with Roadbed
Roadbed for right curved turnout drive (mechanism)
PIKO A Track ballast base for turnout mechanisms, with realistic stone structure. Can be plugged onto the embankment of curved left turnouts (55423).
PIKO | HO scale (1:87) | A-track with Roadbed
Roadbed end piece
PIKO A Track Bedding Base Track Slope End Pieces. These can be plugged onto PIKO A-track with bedding as ends. Length: 2 cm, width: 4.3 cm.
PIKO | HO scale (1:87) | A-track with Roadbed
Roadbed end piece
PIKO A Track Bedding Base Track Slope End Pieces. These can be plugged onto PIKO A-track with bedding as ends. Length: 2 cm, width: 4.3 cm.
PIKO | HO scale (1:87) | A-track with Roadbed
Roadbed Socket for Connection clip
PIKO A Track bedding base for connection clip. With realistic stone structure. Can be used as a base for the 55270 connection clips for analog layouts or 55275 for digital layouts on PIKO A Track with 55406 ballast.
PIKO | HO scale (1:87) | A-track with Roadbed | Code 100
Track screws for roadbed 50 pcs.
Fastening screw for track bedding approx. 50 pieces. Fix the PIKO A-tracks in the bedding.
PIKO | HO scale (1:87) | A-track with Roadbed | Code 100
Track Screws Approx. 400 pcs.
Track screws 1.4 x 18 mm for track bedding approx. 400 pieces. Track fastening screws with sufficient length for the PIKO A track with bedding.
This set is the ideal way to start out in Digital Control (DCC and mfx). It includes a Trix Mobile Station control system which is easy to use in both DCC and mfx. If you are using locomotives with mfx protocol the controller will automatically recognize and load the profile of the locomotive (Name, Class, Icon, Address, Function buttons and more). All you need to do is place the locomotive on the track. In DCC mode you have full control of the CVs and can build and store your own locomotive profile. Up to 40 profiles can be stored for direct access.
This set can be expanded with the Trix C Track extension sets and with the entire Trix C Track program
Code 83: The rail profile is 2.1 mm / 0.083" high
Trix H0 C-track - Article No. 62001
Straight Track
Snap-in end piece for the Trix C Track roadbed. For the end of a train line, sidings, display bases, and display cases. Length 16.5 mm / 5/8". 10 pieces in a package.
Trix H0 C-track - Article No. 62064
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 64.3 mm / 2-9/16". This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings
Trix H0 C-track - Article No. 62071
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 70.8 mm / 2-13/16". Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.
Trix H0 C-track - Article No. 62077
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 77.5 mm / 3-1/16"
Trix H0 C-track - Article No. 62094
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 94.2 mm / 3-3/4"
Trix H0 C-track - Article No. 62107
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 360 mm / 14-3/16", curve 7.5°
Trix H0 C-track - Article No. 62115
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 360 mm / 14-3/16", curve 15°
Trix H0 C-track - Article No. 62130
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 360 mm / 14-3/16", curve 30°
Trix H0 C-track - Article No. 62172
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 171.7 mm / 6-3/4"
Trix H0 C-track - Article No. 62188
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 188.3 mm / 7-3/8"
Trix H0 C-track - Article No. 62206
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 437.5 mm / 17-1/4", curve 5.7°. Extends turnout branch curves (62611 and 62612) to 30°
Trix H0 C-track - Article No. 62207
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 437.5 mm / 17-1/4", curve 7.5°
Trix H0 C-track - Article No. 62215
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 437.5 mm / 17-1/4", curve 15°
Trix H0 C-track - Article No. 62224
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 437.5 mm / 17-1/4", curve 24.3°. Same as turnout branch (62611 and 62612). This track piece will offset the curve on the turnout to parallel your track.
Trix H0 C-track - Article No. 62229
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 229.3 mm / 9". Serves as the complement to the length of the complementary curve on the wide radius turnouts and wide angle crossings.
Trix H0 C-track - Article No. 62230
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 437.5 mm / 17-1/4", curve 30°.
Trix H0 C-track - Article No. 62236
Straight Track - each
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 236.1 mm / 9-5/16". This track is the same length as the length of the wide radius turnouts.
Trix H0 C-track - Article No. 62315
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius R3 = 515 mm / 20-1/4" / 15°. Removable roadbed slopes. This track section is required on both branches of the 62771 and 62772 wide radius curved turnouts.
Trix H0 C-track - Article No. 62330
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 515 mm / 20-1/4", curve 30°
Trix H0 C-track - Article No. 62430
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius R4 = 579.3 mm / 22-13/16"
Trix H0 C-track - Article No. 62530
Straight Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius R5 = 643.6 mm / 25-5/16"
TRIX C-track HO Code 83
Left Turnout
Length 188.3 mm / 7-3/8", curve 24.3°, radius 437.5 mm / 17-1/4" (R2).
Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.
TRIX C-track HO Code 83
Right Turnout
Length 188.3 mm / 7-3/8", curve 24.3°, radius 437.5 mm / 17-1/4" (R2).
Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.
Length 188.3 mm / 7-3/8", crossing angle = 24.3° curve, radius 437.5 mm / 17-1/4" (R2).
Code 83: The rail profile is 2.1 mm / 0.083" high
The double slip switch comes with a manual hand lever, an electric mechanism and a lighted turnout lantern. A turnout decoder can be retrofitted. The double slip switch can be used for left or right installation. The setting for the branch or straight is well-defined. Built-in electric turnout motor and lantern.
TRIX C-track HO Code 83
Left Turnout
Inner curve 30°, radius 360 mm / 14-3/16" (R1). Outer curve 30° in the parallel curve spacing of 77.5 mm / 3-1/16"
Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.
TRIX C-track HO Code 83
Right Turnout
Inner curve 30°, radius 360 mm / 14-3/16" (R1). Outer curve 30° in the parallel curve spacing of 77.5 mm / 3-1/16"
Manual hand lever included. Can be retrofitted with a turnout mechanism, a digital decoder and turnout lanterns.
Length 236.1 mm / 9-5/16".
Branch track radius 1,114.6 mm / 43-7/8".
Turnout curve 12.1°.
10° metal frog, can be polarized.
Two (2) no. 62071 track sections are required at the end of the turnout. A roadbed piece to fit is included. A hand lever is included.
The 62912 curved track (radius 1,114.6 mm, 12.1°) is required to offset and parallel the branch track.
The 62229 straight track (229.3 mm) is required to offset the length of 62912 on the main track.
Length 236.1 mm / 9-5/16".
Branch track radius 1,114.6 mm / 43-7/8".
Turnout curve 12.1°.
10° metal frog, can be polarized.
Two (2) no. 62071 track sections are required at the end of the turnout. A roadbed piece to fit is included. A hand lever is included.
The 62912 curved track (radius 1,114.6 mm, 12.1°) is required to offset and parallel the branch track.
The 62229 straight track (229.3 mm) is required to offset the length of 62912 on the main track.
Trix H0 Code 83 - Article No. 62771
Left Wide Radius Curved Turnout
A long-standing wish of Trix fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Trix is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions
Inner curve: R3 = 515 mm / 20-1/4" / 30°.
Outer curve: 30° with a parallel curve spacing of 64 mm / 2-1/16".
Hand lever included.
Two (2) each 62315 track are required on the inner and outer curve of the turnout. A roadbed piece to fit here is included with the 62315.
The frog is metal and can be polarized.
The 74491 electric turnout mechanism, the 74462 digital decoder, and the 74470 turnout lanterns can be installed on this turnout.
Trix H0 Code 83 - Article No. 62772
Right Wide Radius Curved Turnout
A long-standing wish of Trix fans is being fulfilled with the wide radius curved turnouts. Prototypical track plans are now no longer a problem. Trix is thereby setting a new standard in turnout geometry in which the conception of elegant track patterns reaches new dimensions
Inner curve: R3 = 515 mm / 20-1/4" / 30°.
Outer curve: 30° with a parallel curve spacing of 64 mm / 2-1/16".
Hand lever included.
Two (2) each 62315 track are required on the inner and outer curve of the turnout. A roadbed piece to fit here is included with the 62315.
The frog is metal and can be polarized.
The 74491 electric turnout mechanism, the 74462 digital decoder, and the 74470 turnout lanterns can be installed on this turnout.
TRIX H0 Code 83 - Article No. 62900
C Track - Large Track Extension Set
This track extension set can be used to expand the track layout for all starter sets. It can be used for parallel track connections, passing sidings, a storage siding, and new routes. This track extension set is suitable for TRIX starter sets as well as for existing layouts. It can be expanded with the entire C Track program.
If you already have a "two-rail" layout, you can benefit from Trix C Track: Use this elegant roadbed track for any expansion. You use the adapter track (62951) for the transitions in the existing area. It allows connections between Trix C Track and conventional Code 83 track.
TRIX H0 Code 83 - Article No. 62902
C Track - C2 Extension Set - passing siding
For expanding the basic oval C Track starter set or any lay-out in need to include a passing siding.
TRIX H0 Code 83 - Article No. 62903
C Track - C3 Extension Set - passing siding with curved turnouts
For expanding the basic oval C Track starter set or any lay-out in need to include a passing siding utilizing curved turnouts to optimize available real-estate.
You may further expand your lay-out utilizing suitable pieces from the TRIX C-track assortment
Trix H0 C-track - Article No. 62912
Curved Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Radius 1114.6 mm / 43-7/8". Curve 12.1°
Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.
This curve is used to offset the curve on the 62711 and 62712 Wide Radius Turnouts so that the branch will parallel with the main line. The 62071 is also required as a wedge piece between the turnout and the 62912.
Trix H0 C-track - Article No. 62922
Straight Track - Adapter Track from Fleishmann Profi Track (Code 100)
Code 83: The rail profile is 2.1 mm / 0.083" high (TRIX C-Track)
Length 180 mm / 7-7/8"
This track enables the transition from the FLEISCHMANN* Profi Track System to the Trix C Track: Code 100 to TRIX C-track Code 83
*FLEISCHMANN is a brand of Modelleisenbahn München, Inc.
Trix H0 C-track - Article No. 62977
Straight Track - Track End with a Bumpter
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 80.5 mm / 3-3/16"
A frame with a buffer beam comes mounted on the track. The rails end in the roadbed.
Trix H0 C-track - Article No. 62997
Straight Track - Uncoupler Track
Code 83: The rail profile is 2.1 mm / 0.083" high
Length 94.2 mm / 3-3/4"
The uncoupler track comes with a manual hand lever and a built-in electric mechanism. It is compatible with most common European coupler systems. It can be used with all NEM couplers and with current close coupler systems. A light mast can be plugged into the uncoupler track as an uncoupler signal (Märklin 74997). The uncoupler track can be connected to a control box or to a digital decoder
Trix H0 - Article No. 62997
Locomotive Wheel Cleaning Brush
This brush is for cleaning locomotive wheels. Clean wheels help prevent television/radio interference. This brush is also useful for cleaning track. The brush can be lengthened by connecting several brushes together.
TRIX H0 Code 83 - Article No. 66861
C Track - Turntable
This is a DB standard design 23 meter / 74 foot 9 inch turntable. It is designed for conventional and digital locomotive operation. The remote controlled deck has a built-in motor. It can only be controlled digitally with the Mobile Station 2 and Central-Station 2 and 3 (not included). Control with the Central-Station 2 and 3 is especially easy by means of track indexing (after carrying out an update), or with different digital central controllers that use the DCC digital format.
WalthersContols® | HO-scale | Track Accessories
Manual Uncoupler: Perfect for yards, sidings or main lines. Magnet rotates to avoid accidental uncoupling. Complete instructions, drilling jig, trackside marker and control knob all included. Easily installed in new or existing Code 83 or 100 track. Works with most magnetic knuckle couplers
Tools Needed (sold separately): 5/32" 3.9mm Drill Bit 1/16" 1.5mm Drill Bit
Vertical-Mount Switch Machine
Walthers Part # 942-101
A scale
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.
Horizontal-Mount Switch Machine
Walthers Part # 942-102
A scale
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - a DCC accessory decoder is integrated into the switch machine. The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.
Walthers Layout Control System
Distribution Block
Walthers Part # 942-111
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.
Download the Instruction Sheet (94 K bytes, PDF format)
Connecting Cable pkg(5) Socket - Socket
WALTHERS Part # 942-112
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.
Walthers Layout Control System
Extension Cable, Plug - Socket, Length: 48" 122cm pkg(5)
Walthers Part # 942-113
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.
Walthers Layout Control System | all scales
Dual LED Fascia Turnout Controller (yellow-green)
Walthers Part # 942-121
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.
Dual-Color LED Fascia Crossover Controller - Yellow - Green
Walthers Part # 942-122
A scale
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.
Walthers Layout Control System | all scales
Dual Color LED Accessory Fascia Controller (yellow-green)
Walthers Part # 942-123
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.
Walthers Layout Control System | all scales
Dual Color LED Accessory Fascia Controller (red-green)
Walthers Part # 942-124
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.
Walthers Layout Control System
Turnout Drill Set
Walthers Part # 942-140
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate.
Download the Instruction Sheet (94 K bytes, PDF format)
Edge Connector for Tortoise(R) Switch Machine pkg(2)
Walthers Part # 942-142
A scale
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed.
