HobbyTech is no longer accepting orders from US customers through the website. The primary reason is that customs charges have to be calculated and prepared for you manually. The courier companies requires that tariffs, taxes and fees are collected in advance.
Please place your orders by email. We will prepare your order and forward your total cost including customs duties and shipping cost for delivery by a courier like UPS, FedEx and Purolator.
US tariff refers to the import duties and fees applied to goods entering the U.S., which vary based on the product, its country of origin, and recent policy changes. The US administration has recently eliminated its de minimis exemption for most shipments, meaning all shipments may now be subject to taxes and fees including but not limited to brokerage charges. The duties are cost to be paid by the US consumer and must in most cases be paid in advance through the carrier used to import your goods.
We ship world wide with Canada Post* at cost + $4 Handling Charge . Courier service is also available within Canada.
We do NOT offer Free Shipping. Pick-Up in store is defined as a shipping option and is of course at no charge. As this is the lowest cost option it is also the default by the website. Hence you may see Free Shipping during check-out till you have chosen your shipping option. Shipping by Canada Post or a courier service will always be at a charge.
We ship FOB Origin: The buyer (customer) assumes full responsibility of the goods once it has been picked up by the carrier.
Insurance: Up to 100 CAD (about $70 USD) coverage is included with the shipping. Any shortfall in the event of a loss or damage to your parcel is deemed to be self-insured by you, the recipient. Additional coverage may be available at a cost of $2.80 CAD ($2.00 USD) per increment of $100 CAD (about $70 USD). Please let us know that you would like to add insurance and we will add if available on your shipping option before charges are processed.
We pack well to protect your items during transit. Should you want extra padding just let us know. Keep in mind, that will increase the parcel volume and with that also your cost.
*Some countries are excluded by our website as Canada Post with its international partners only offer limited shipping options. However, you may order by email and we will process your order manually. Keep in mind that shipping might be expensive.
The website can process the order in USD or CAD currency. The currency selector is placed in the upper right corner on this page.
US and International customers can complete the shopping cart in USD and pay by PayPal. If you prefer CAD then the payment can only be by Bank Wire (EFT/ACH). If you prefer to pay by Credit Card then select PayPal and use your credit card as the source of payment.
Canadian Customers can complete the order in either CAD or USD currency. If you select CAD then you have the options to pay by VISA, MasterCard or Interac e-Transfer. We also accept EFT/ACH.
We are unfortunately not setup to accept Debit cards like VISA Debit or MasterCard Debit through the website. However, you can pay with Debit / Interac In-Store.
If you would like to use funds on your PayPal account, then make sure to select USD as the currency in the upper right corner of the website.
Interac e-Transfer is preferred. If you elect to pay by Interac e-Transfer (CAD), then do not send the funds yet. We will verify that all items are in stock and email you an invoice with payment instructions. You will also get a 1.5% credit (savings) on your order for paying by Interac e-Transfer.
You can also pay by CASH (in-store) if you are picking up your order within 5 days.
Money Orders are accepted with a surcharge to cover handling cost. Please email us for details.
IMPORTANT NOTE: The website will not automatically charge your Credit Card or PayPal account. You merely authorize the charges. We will verify that all is in stock and communicate with you in case of any variations. When all is in order we will process the payment.
We do not take any item back for a refund or exchange for any reason whatsoever. However, we may consider to buy back your surplus item. The discount will depend on the item and condition. Please email us to negotiate.
All warranty claims rest with the respective manufacturer and are subject to its terms and conditions accordingly. Please visit the manufacturer website for details and procedures regarding your claim. HobbyTech do not offer a supplemental warranty program. Nor is HobbyTech, or any other dealer, authorized to act on behalf of the manufacturer. However, on your request, HobbyTech is happy to assist and can help coordinate and facilitate your warranty claim. You can therefore either contact the manufacturer directly or ask HobbyTech for assistance. You may do so by email providing all relevant details regarding your item, symptoms and defects observed. We will then contact the manufacturer on your behalf and coordinate the warranty claim. You may be asked to ship your item to them or to HobbyTech at your cost. Return shipping is likely covered by the manufacturer. HobbyTech will and cannot assume any liability regarding your warranty item.
It is inevitable that mistakes can happen even though we are making the best effort to provide accurate and relevant information herein. You may need to verify with the manufacturer official website to ensure yourself that you in fact are making the purchase of the item intended and the specifications are as expected. Accordingly, we will not take an item back due to but not limited to incorrect item number, incorrect road number or incorrect item description. Should you be in doubt or have discovered that our information is inconsistent with the manufacturer we welcome your feedback. HobbyTech will not be held liable for any loss due to errors or omissions on this website.
HobbyTech reserves the right to correct pricing before finalizing the sale due to but not limited to price increase by the manufacturer or supplier, currency exchange variations or increase in logistical cost like shipping and handling. Should an error be discovered after the sale is finalized we do expect that you will make good on any shortfall we can document or return the item to us. Examples of this could be that we did charge you for a DC model while you did get a DCC/sound unit, we did not charge applicable tax or charged you incorrectly for shipping. Likewise, HobbyTech will refund any overcharge due to our error.
There are 4271 products.
Suburban Overhead Stairway | Kato
Article No. 23-234 Building - N scale
MSRP $32.00 USD
Automatic 3 Color Signal, Straight Track 124mm | Kato
Article No. 20-605 DC Addon - N scale
KATO | N-scale (1:160) | Unitrack
Automatic 3 Color Signal SX
with 2-1/2" 64mm Straight - Left-Handed
Pier Raising Kit with Trapezoid Shape, 5 pcs | Kato
Article No. 23-068 Unitrack Accessory - N scale
MSRP $13.00 USD
No. 5 Single Track Piers with Trapezoid Shape 50mm, 5 pcs | Kato
Article No. 23-069 Unitrack Accessory - N scale
Unitrack Viaduct Station Set Kit | Kato
Article No. 23-125 Building Set - N scale
MSRP $148.00 USD
Unitrack Viaduct Station Stores Kit | Kato
Article No. 23-231 Building Set - N scale
MSRP $59.00 USD
Unitrack Viaduct Platform Extension Set | Kato
Article No. 23-232 Building Set - N scale
MSRP $39.00 USD
KATO | N-scale (1:160) | structures
North American Suburban Station -- Kit
9-11/16 x 3" 24.6 x 7.6cm
Features pre-painted parts including pre-mortared brick details plus an assortment of different commuter and Amtrak stickers.
The kit is manufactured by Faller (Germany)
Labelle Industries 1001 (A) Oiler Starter Set Assortment
Walthers Part # 430-1001
Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For HO, O, S, On30, Lionel, LGB and all larger size trains. Comes with 7-1/2" extension needle adapter for those hard-to-reach places..
Labelle Industries 1002 (A) Oiler Starter Set Assortment
Walthers Part # 430-1002
Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For small HO engines, N and Z Scales. Comes with 7-1/2" extension needle adapter for those hard-to-reach places.
Wheel blocks are used to keep cars in place on grades and on sidings and keep them from rolling away.
A package has 12 piece
You can enlarge your LGB starter set circle into an oval with a siding for switching operations and train storage. The sturdy storage box includes: 1 - 12000 manual right-hand switch, 6 - 10000 straight track sections, 1 - 11000 curved track section, 1 - track bumper.
You can enlarge your LGB starter set circle into an oval with a passing track. Two trains can pass, one train can park, cars can be switched or a locomotive can be moved from one end of the train to the other.
The Christmas car for 2021 is imprinted with a wonderful theme. Naturally, the model also has doors that can be opened and it is a seamless addition to the previous series of LGB Christmas cars. The car has metal solid wheelsets. Length over the buffers 30 cm / 11-13/16".
The Christmas Car for 2023 is extensively imprinted with a wonderful theme. Naturally, this model has doors, which can be opened, and it is a seamless addition to the previous series of LGB Christmas cars. The car has metal solid wheelsets.
Length over the buffers 30 cm / 11-13/16".
The Christmas Car for 2025 is extensively imprinted with a marvelous theme. This model naturally also has doors that can be opened, and it is a seamless addition to the previous series of LGB Christmas Cars. This car has solid metal wheelsets.
Length over the buffers 30 cm / 11-13/16".
This is a model of a CP Rail (Canadian Pacific Railroad) covered hopper car. It is prototypically painted and lettered for Era V. The car has many separately applied details, roof hatches, and unloading hatches that can be opened. The car has metal wheel sets.
Length over the couplers 54 cm / 21-1/4".
This is a model of a CP Rail (Canadian Pacific Railroad) covered hopper car. It is prototypically painted and lettered for Era V. The car has a different car number from that for item number 43821. The car has many separately applied details, and roof hatches and unloading hatches that can be opened. The car has metal wheel sets.
Length over the couplers 54 cm / 21-1/4".
This is a model of an SP (Southern Pacific Railroad) boxcar. It is prototypically painted and lettered for Era III. The car has many separately applied details and sliding doors on the sides that can be opened. It also has metal wheel sets.
Length over the couplers 42 cm / 16-1/2".
This extension set for the construction site train contains another dump car, a power shovel with a manually movable shovel, a toy figure, and a number of accessories typical for a construction site such as barriers or signs. The stickers included with this set can be used to decorate the dump car. Length of the dump car 17 cm / 6-11/16".
This extension set is ideal to expand the 70503 construction site set.
Here is an economical method to clean your rails easily and gently. The cleaning pad removes dirt from the rails without harmful abrasives. The 6 mm / 1/4“ thick cleaning pad will give many hours use. Not suitable for nickel-plated track.
Non-abrasive replacement pads for the LGB 50050 Track Cleaning Attachment.
This starter set contains an old-timer train consisting of a tank locomotive and 2 passenger cars. The locomotive has a powerful Bühler motor with ball bearings as well as a headlight, sound module, and a smoke unit. The set also has a complete circle of track, a power supply, and a locomotive controller. Train length 85 cm / 33-7/16".
120 volt transformer.
This starter set contains an old-timer train consisting of a tank locomotive and 2 passenger cars in a Christmas paint scheme. The locomotive has a powerful ball bearing mounted Bühler motor as well as a headlight and a smoke unit. The set also contains a complete circle of track, a power supply, and a locomotive controller. Train length 85 cm / 33-7/16“.
This train can be expanded marvelously with the Christmas cars that have come out in the past.
120volt transformer for Canada and USA
The starter set for all sorts of fun. The set includes a freight train with a “Stainz” steam locomotive, a ballast car, and a loaded low-side car (load may vary). The locomotive is equipped with a powerful motor, electronic steam sound, a smoke generator. The set also includes a full circle of track (1,290 mm / 51“ diameter), a 120 volt power supply, and a controller. Train length 85 cm / 33-7/16”.
120 volt transformer.
This starter set contains an old-timer steam locomotive and two freight cars to go with it in the paint scheme and lettering for the Lake George and Boulder Railroad, LGB for short. Both wheel sets on the locomotive are driven with a powerful Bühler motor. The headlight at the front lights up. Twelve (12) sections of curved track, a transformer with a locomotive controller, and all of the wire required for connections are included. Length over the buffers 85 cm / 33-7/16".
120 volt transformer.
This starter set contains a construction site train consisting of a tank locomotive, a low side car, and a dump car. The locomotive has a powerful motor and a lighted headlight. The stickers included with this set can be used to decorate the locomotive and both cars. The set also has a complete circle of track, a power supply for 120 volts, and a locomotive controller. Train length 68 cm / 26-3/4".
An add-on set with another dump car, a power shovel, and construction site accessories is available under item number 49500
120 volt transformer.
This starter set includes a steam locomotive, two flat cars with a building block plate and 30 building blocks. The set also includes a complete circle of track consisting of 12 curved sections of track, a locomotive controller, a power supply for 120 volts, and feeder wires. Train length 77 cm / 30-5/16".
The 94063 building block car can be added to this train.
This is a model of a two-axle flat car. The car floor has pegs so that different superstructures can be built with the blocks of well-known manufacturers available in most toy stores.
Length over the buffers 26 cm / 10-1/4"
Liliput - 4-Axle Gondola - (FS) - 24430
Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase
Liliput - Railway Post Car - (DRG) - 29202
Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase
LIMA Collection | HO| passenger car
Passenger car 2.class (DSB) type B 508620-83127-3 (consignment)
Length: 265 mm
Detailing parts enclosed.
Consignment Sale: This is a NEW unit (never used) but has been in storage for a while and therefore sold as used. This unit is inspected and found to be as-if-new. The factory warranty has expired and sold as-is. Make sure to address all your concerns before making the purchase.
This adapter is suitable for N-scale DC, DCC controllers and accessories.
INPUT: 120VAC 60 Hz 23W
OUTPUT: 12V DC 1A
MODEL: AM-1201000D41
Prototype:Different versions of the German Federal Railroad (DB) type Kmmks 51 sliding roof gondola. Short version without a brakeman's platform and without a brakeman's cab. As well as a long version with a brakeman's platform or with a brakeman's cab. The cars look as they did around 1960.
Model:Selection of the short version without a brakeman's platform, the version with a brakeman's platform, and the version with a sheet metal brakeman's cab are subject to availability. All of the cars have different car numbers. The roofs can be opened on all of the cars. Each car comes individually packaged in a marked box.
Length over the buffers for each car 11.5 cm / 4-1/2" or 12.2 cm / 4-13/16".
DC wheel set for each car 2 x 700580.
NOTE: This item is sold as PER CAR not as a SET
Prototype: Different type Tes-t-58 Kmmgks sliding roof / sliding wall cars painted and lettered for the German Federal Railroad (DB). Version without a brakeman's platform and version with a brakeman's platform. The cars look as they did around 1962.
Model: The cars have two roof colors. All of the cars have different car numbers. Each car is individually packaged in a marked box. Length over the buffers for each car 11.5 cm or 12.2 cm / 4-1/2" or 4-13/16".
DC wheel set per car 2 x 700580.
NOTE: This item is sold as PER CAR not as a SET
Prototype: Different freight cars with sheet steel walls in the sheet piling wall form of the German Federal Railroad (DB) type Gbs 256 (Glmms 64). Version without truss rods. Part of the cars as delivered new around 1966, part of the cars as they looked around 1977. Era IV
Model: The two-axle sheet piling wall cars come in an attractive display, 8 of them looked like newly delivered cars and 12 looking weathered. All of the cars have different car numbers. Each car comes individually packaged in marked boxes. Length over the buffers for each car 16.2 cm / 6-3/8".
DC wheel set for each car 2 x 700580.
NOTE: This item is sold as PER CAR not as a SET
Prototype: German Federal Railroad (DB) type Abi "Donnerbüchse" standard car. 1st and 2nd class. Era III
Prototype: German Federal Railroad (DB) type Bi "Donnerbüchse" standard car 2nd class. Era III
Prototype: German Federal Railroad (DB) type Pwi "Donnerbüchse" standard car. Era III
Eextensive catalog of the entire Märklin program (all scales: 1, HO and Z)
English edition in the format of 29 x 21 cm.
Full color, with very detailed pictures and complete product description with highlights and features.
Märklin Start Up | HO (1:87) | C-track
"Snow-Covered Track" C Track Extension Set
Marklin - K-Track - 180mm / 7-3/32" Straight - 2100 (10pk) (used)
Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase
Märklin | HO (1:87) | K-track
Left Turnout
Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts.
>
Märklin | HO (1:87) | K-track
Right Turnout
Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts.
>
C-Track -- End Piece/Roadbed | Märklin
Article No. 24001 C Track - HO Scale
Snap-in end piece for the C Track roadbed. For the end of a train line, sidings, display bases, and display cases.
3-Rail C Track -- Straight | Märklin
Article No. 24064 C Track - HO Scale
This track is the same length as the parallel track spacing for the wide radius turnouts and wide angle crossings.
3-Rail C Track -- Straight | Märklin
Article No. 24071 C Track - HO Scale
This track is used on both branches of the wide radius turnouts and wide angle crossings.
3-Rail C Track -- Straight | Märklin
Article No. 24077 C Track - HO Scale
3-Rail C Track -- Track Feeder | Märklin
Article No. 24088 C Track - HO Scale
MSRP $25.00 USD
For connecting a transformer and up to 2 Mobile Stations 60652
3-Rail C Track -- Straight | Märklin
Article No. 24094 C Track - HO Scale
3-Rail C Track | Märklin
Article No. 24107 curved C Track - HO Scale - R1 7.5°
R1 = radius 360 mm / 14-3/16"
3-Rail C Track -- R1 Curved | Märklin
Article No. 24115 C Track - HO Scale
3-Rail C Track -- Curve | Märklin
Article No. 24130 C Track - HO Scale
3-Rail C Track -- Straight | Märklin
Article No. 24172 C Track - HO Scale
3-Rail C Track -- Straight | Märklin
Article No. 24188 C Track - HO Scale
3-Rail C Track -- R1 Curved Circuit | Märklin
Article No. 24194 C Track - HO Scale
Momentary contact by means of locomotive/car pickup shoe.
3-Rail C Track | Märklin
Article No. 24206 curved C Track - HO Scale - R2 5.7°
NOTE: 5.7° extends 24611 and 24612 turnouts to 30°
R2 = radius 437.5 mm / 17-1/4" /
3-Rail C Track | Märklin
Article No. 24207 curved C Track - HO Scale - R2 7.5°
R2 = radius 437.5 mm / 17-1/4"
3-Rail C Track -- R2 Curved | Märklin
Article No. 24215 C Track - HO Scale
The bottle contains 50 ml / 1.69 oz of alcohol-based steam and cleaning distillate. It is suitable and usable for all smoke generators, all sizes and track widths. Includes 2 pipettes for precise dosing. The particularly prototypical steam development created by this distillate makes the experience of the steam locomotive appear even more lively and the illusion of a hard-working steel animal is perfect. It is also suitable for cleaning the tracks and most dirt, for example on locomotives and wagons. Information on hazardous substance information and the safety data sheet can be found here (Hazard Notes, Safety Data Sheet).
3-Rail C Track -- R2 Curved | Märklin
Article No. 24224 C Track - HO Scale
3-Rail C Track | Märklin
Article No. 24229 straight C Track - HO Scale
Length 229.3 mm / 9"
NOTE: Offsetting straight track to the length of the offsetting curve on the wide radius turnouts and wide angle crossings (24711, 24712 and 24630).
The bottle contains 250 ml / 8.45 oz of alcohol-based steam and cleaning distillate. It is suitable and usable for all smoke generators, all sizes and track widths. Includes 2 pipettes for precise dosing. The particularly prototypical steam development created by this distillate makes the experience of the steam locomotive appear even more lively and the illusion of a hard-working steel animal is perfect. It is also suitable for cleaning the tracks and most dirt, for example on locomotives and wagons. Information on hazardous substance information and the safety data sheet can be found here: Hazard Note, Safety Data Sheet).
3-Rail C Track -- R2 Curved | Märklin
Article No. 24230 C Track - HO Scale
3-Rail C Track -- Straight | Märklin
Article No. 24236 C Track - HO Scale
This track is the same length as the length of the wide radius turnouts and wide angle crossings.
3-Rail C Track -- R2 Curved Circuit | Märklin
Article No. 24294 C Track - HO Scale
Momentary contact by means of locomotive/car pickup shoe.
3-Rail C Track -- R3 Curved | Märklin
Article No. 24315 C Track - HO Scale
This track section is required on both branches of the 24771 and 24772 wide radius curved turnouts.
3-Rail C Track -- R3 Curved | Märklin
Article No. 24330 C Track - HO Scale
Straight Track | Märklin (HO) C-track
Article No. 24360 C Track - HO Scale
3-Rail C Track -- R4 Curved | Märklin
Article No. 24430 C Track - HO Scale
3-Rail C Track -- R5 Curved | Märklin
Article No. 24530 C Track - HO Scale
3-Rail C Track -- Left Turnout | Märklin
Article No. 24611 C Track - HO Scale
3-Rail C Track -- Right Turnout | Märklin
Article No. 24612 C Track - HO Scale
3-Rail C Track -- Double Slip Switch | Märklin
Article No. 24624 C Track - HO Scale
