Shipping Policy

This electric mechanism can be installed and connected on turnouts very easily without special tools. The mechanism sits hidden in the roadbed; below-baseboard mounting is not required. It is encapsulated against dirt and is protected against overloads with the end shut-off contacts. The mechanism can be controlled by means of a normal accessory controller, an accessory controller with a feedback function, or a digital decoder. The hand lever can be left on the turnout for manual control.

This is a standard design 23 meter / 74 foot 9 inch turntable. It is designed for conventional and digital locomotive operation. The remote controlled deck has a built-in motor. It can only be controlled digitally with the Mobile Station 2 and Central-Station 2 and 3 (not included). Control with the Central-Station 2 and 3 is especially easy by means of track indexing (after carrying out an update), or with different digital central controllers that use the DCC digital format.

This turntable can be used with the 72886 roundhouse locomotive shed. Various sound functions can be controlled. LEDs are used to light the turntable operator's hut and the outside lighting and they can be controlled.

This link will take you to the 74861 Manual (turntable manual)

This set has 3 track spoke connections for C Track. They can be inserted at the location of your choice on the rim of the turntable pit. The track spoke connections have built-in locomotive current contacts. Length 57.5 cm / 2-1/4".

This single-track railroad grade crossing has half gates and is fully assembled. This grade crossing can be connected directly to C Track. The grade crossing has 2 solenoid activated gates with 2 red warning lights, which come on when the gates come down. This grade crossing is ready to be connected to the layout and features easy installation.

Contact track set: 3 straight tracks each 94.2 mm / 3-3/4".

Dimensions for each base half 137 x 95 mm / 5-3/8" x 3-3/4".

Gauge H0 - Article No. 74990
Track Screws for Märklin and TRIX C-track

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

These spade connectors can be used for the contact fingers on C Track. They are for all Märklin wire from 0.19 sq. mm / 0.0003 sq. in. or 0.02 in. diameter to 0.75 sq. mm / 0.001 sq. in. or 0.04 in. diameter. 1 package contains 20 spade connectors.

Märklin System C-Track | Light Mast for the Uncoupler Track

The light mast can be plugged into the Märklin 24997 C Track or TRX 62997 C-track (DC). The mast signal lights up when the uncoupler track is activated. Metal mast. Height 85 mm / 3-38". This light mast is technically the same as the earlier 5113 mast.

Marklin -Ground Terminal Clip - 7500 (new)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - K-Track Ground Terminal Clip - 7500 (used)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7504 (new)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7504 (used)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary Feeder Masts - K-Track - 7509 (10pk)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary Feeder Masts - K-Track 7509 (4pk)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary Feeder Mast - K-Track - 7512 (each)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7522 (5pk) (new)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin -Third Rail Terminal Clip - 7522 (5pk) (used)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

Marklin - Catenary - Cantilever Support Arm - K-Track - 7525 (10pk)

Consignment Sale: This unit is inspected and found to be as-if-new. The factory warranty has expired. Sold as-is. Make sure to address all your concerns before making the purchase

This is an improved version of the 7549 turnout mechanism. This mechanism can be used with the 2265 and 2266 turnouts (new versions), the 22715 and 22716 turnouts, the 2275 double slip switch, and the KOMBI extension set program. The mechanism has an automatic end shutoff feature. Automatic feedback is possible with the 72710 control box. Below-baseboard mounting can be done with the 7548 installation kit.

Prototype: Low side car, boxcar, and dump car painted and lettered for a construction train. Modern design construction vehicle.

• Track for expanding a C Track layout.
• A variety of ways to play with the inclusion of the construction vehicle and load.

Model: All of the cars have Relex couplers.
Length of the freight car set 34.5 cm / 13-9/16".

Contents:

• 5 no. 24188 straight track,
• 4 no. 24172 straight track,
• 1 no. 24224 curved track,
• 1 no. 24612 right turnout,
• and 1 no. 24977 track bumper.

The construction vehicle is made of metal. "Gravel" freight load included.

Prototype: German Railroad, Inc. (DB AG) type DBbzfa 761 bi-level cab control car, 2nd class.

Prototype: German Railroad, Inc. (DB AG) Bord Restaurant dining car for a class 402 InterCity Express.

Prototype: 1 German Railroad, Inc. (DB AG) class 120 electric locomotive (former road number 120 160), 1 type RAILab 1 measurement car, and 1 type Dienstmz. 307 cab control car. The units look as they do in Era VI.

MHI - One Time series

Märklin - Gauge Z - Article No. 81701
"Freight Train" Starter Set with a Class 89 Steam Locomotive, and Oval of Track, a Locomotive Controller, and a Power Supply

Prototype: German Federal Railroad (DB) class 89 steam locomotive, 1 DB low side car with a tarp, 1 boxcar.

American Christmas Starter Set | Märklin

Article No. 441-81846 Christmas Train Set  - Z Scale

Included are 3 each decorated Christmas trees and kits for "Christmas Stands", "Santa Claus", and "Skating Rink", which can be assembled to make a small winter Christmas market. The stands can also be transported on the high-side gondola. 

Märklin - Article No. 441-81874 Starter Set  - Z Scale
"Museum Passenger Train" Starter Set with a Class 24 Steam Locomotive.

Prototype: BR 24 museum steam locomotive, road number 24 009. 1 type Pwi baggage car, 1 corridor car, 1st/2nd class, and 1 type WRi refreshment car. The locomotive and cars look as they currently do in real life. Era III / Era VI (museum)

Märklin mini-club | Z-scale (1:220) | starter sets

"Modern Freight Service" Starter Set with a Class 285 Diesel Locomotive

1 class 285 Rheincargo diesel locomotive. 3 VTG freight cars, of them 1 type Eaos gondola, 1 type Falns dump car, and 1 type Shimmns sliding tarp car. The locomotive and cars look as they did in Era VI .

Märklin - Gauge Z - Article No. 8190

Contents: 10 straight tracks, 2 curved tracks, 2 turnouts and instructions. 

Märklin - Gauge Z - Article No. 8191
Contents: 10 straight tracks, 2 curved tracks, a control box, a distribution strip, wire, plugs and sockets, and instructions. 

Märklin - Gauge Z - Article No. 8192

Contents: 6 straight tracks, 6 curved tracks, 2 electric curved turnouts, a control box, a distribution strip, wire, plugs and sockets, and instructions. 

Märklin - Gauge Z - Article No. 8193

Contents: 8 straight tracks, 2 curved tracks, 2 electric curved turnouts, a control box, a distribution strip, wire, plugs and sockets, and instructions 

Märklin - Gauge Z - Article No. 8194

Contents: 10 straight tracks, 1 double slip switch, 2 electric turnouts, 4 track bumpers, a control box, a distribution strip, wire, plugs and sockets, and instructions.

Märklin - Gauge Z - Article No. 8194

Contents: This set contains all of the parts needed to set up catenary on an S + E layout. Contents: 19 catenary masts, 20 sections of catenary wire, 8 insulators, 6 connecting springs, and instructions.

Märklin - Gauge Z - Article No. 8194

Contents: This set contains all of the parts needed to set up catenary on an S + E layout. Contents: 19 catenary masts, 20 sections of catenary wire, 8 insulators, 6 connecting springs, and instructions.

Prototype: 2 German Federal Railroad (DB) type Rmms 33 stake cars. The cars look as they did in Era III. One car does not have a hand brake and does have wooden sides and wooden stakes. The other car has a brakeman's platform, metal sides, and pressed metal stakes. Hanomag delivery truck with a flatbed. Era III

Prototype: Car set consisting of 4 type KLV flat cars for AAE Cargo. Designed for the transport of semi-truck rigs. Era VI

Prototype: 2 German Railroad, Inc. (DB AG) type Rils 652 four-axle tarp cars with tarp lettering for DB Schenker. Era VI

Highlights: Car floors constructed of metal.

Prototype: 3 French State Railways (SNCF) type Rils tarp cars. European standard design, 19.90 meters / 65 feet 3-1/2 inches in length. Version with single-piece tarp and rectangular buffers. The cars look as they did in Era V.

Prototype: 9 flat car with stakes with a load of wood, KLV transport car with a 40 foot "GENSTAR" container, and a "Tycza Gas" gas tank car without a heat shield. All of the cars look as they did in Era IV.

One-time production for the Märklin Dealer Initiative (MHI)

Märklin - Gauge Z - Article No. 8500
Straight Track - Length 110 mm / 4-3/8".

Märklin - Gauge Z - Article No. 8503
Straight Track - Length 55 mm / 2-3/16"

Märklin - Gauge Z - Article No. 8504
Straight Track - Length 25 mm / 1"

Märklin - Gauge Z - Article No. 8505
Straight Track - Length 220 mm / 8-13/16"

Märklin - Gauge Z - Article No. 8506

Straight Track - Length 108.6 mm / 4-1/4" - For adjusting length on the 8559 crossing and 8560 double slip switch.

Märklin - Gauge Z - Article No. 8507

Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

Märklin - Gauge Z - Article No. 8510

Curved Track - Radius 145 mm / 5-3/4". 45°

Märklin - Gauge Z - Article No. 8520

Curved Track - Radius 195 mm / 7-11/16". 45°

Märklin - Gauge Z - Article No. 8521

Curved Track -Radius 195 mm / 7-11/16". 30°

Märklin - Gauge Z - Article No. 8530

Curved Track - Radius 220 mm / 8-11/16". 45°

Märklin - Gauge Z - Article No. 8531

Curved Track - Radius 220 mm / 8-11/16". 30°

Märklin - Gauge Z - Article No. 8559

Crossing - 112.8 mm / 4-7/16" - 13°

Märklin - Gauge Z - Article No. 8562

Left Turnout - Length 110 mm / 4-3/8" - 13° - Radius 490 mm / 19-1/4".

The 8562 left and the 8563 right turnouts have double solenoid mechanisms and manual hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Märklin - Gauge Z - Article No. 8563

Right Turnout - Length 110 mm / 4-3/8" - 13° - Radius 490 mm / 19-1/4".

The 8562 left and the 8563 right turnouts have double solenoid mechanisms and manual hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Märklin - Gauge Z - Article No. 8565

Manual Left Turnout - Length 110 mm / 4-3/8" - 13° - Radius 490 mm / 19-1/4".

Märklin - Gauge Z - Article No. 8566

Manual Right Turnout - Length 110 mm / 4-3/8" - 13° - Radius 490 mm / 19-1/4".

Märklin - Gauge Z - Article No. 8568

Curved Electric Turnout - Radius 195 mm / 7-11/16" - 30° (same as 8521.) - Main track length 25 mm / 1".

The 8568 left and the 8569 right curved turnouts as well as the 8560 double slip switch have double solenoid mechanisms and manual hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Märklin - Gauge Z - Article No. 8569

Curved Right Electric Turnout - Radius 195 mm / 7-11/16" - 30° (same as 8521.) - Main track length 25 mm / 1".

The 8568 left and the 8569 right curved turnouts as well as the 8560 double slip switch have double solenoid mechanisms and manual hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Straight Uncoupler Track Length 55 mm / 2-3/16"
The Märklin uncoupler track combines ruggedness, electrically reliable connections, and prototypical appearance. The track system can be expanded as you like. The ideal track system for new beginners and advanced modelers.

Märklin - Gauge Z - Article No. 8589

Straight Circuit Track - Length 55 mm / 2-3/16".
Terminal clips included. A passing train activates the function.

Märklin - Gauge Z - Article No. 8590

Straight Feeder Track - Length 110 mm / 4-3/8".
Interference suppressor included. 2 permanently connected wires for track current.

Märklin - Gauge Z - Article No. 8591

Complementary curve for turnouts. 13°. Radius 490 mm / 19-1/4". Same curve as the branch on the 8562 L, 8563 R, 8565 L and 8566 R turnouts.

Märklin - Gauge Z - Article No. 8592

Adjustable in length from 100 to 120 mm / 3-15/16" to 4-3/4" for situations where a standard section will not fit.

Märklin - Gauge Z - Article No. 8594

Length 660 mm / 26'. The track can be made flexible by cutting the tie strip. Cut rails and tie strip to desired length and install new rail joiners (8954).

Prototype: 1 type Pwgs 41 freight train baggage car, 2 type Omm 52 gondolas without hand brakes, 1 type G 10 boxcar without a hand brake, 1 type K 15 hinged roof gondola with a hand brake. All cars for the German Federal Railroad (DB). The cars look as they did in Era III.

Prototype: German Federal Railroad (DB) type Tams 886 as it looked in Era IV.

Prototype: 2 German Federal Railroad (DB) pairs of passenger cars consisting of 3-axle rebuild cars and 1 commuter cab control car. 1 pair of rebuild cars type AB3yge, 1st/2nd class and type B3yge, 2nd class, 1 pair of rebuild cars type B3yge, 2nd class, and 1 type BD4nf-59 "Silberling" / "Silver Coins" cab control car. The cars look as they did in Era III around 1965.

Exclusive edition for the Märklin Dealer Initiative (MHI)

Prototype: Era V passenger car set in the striking "Touristikzug" paint scheme, consisting of 2 each type Bvmkz 856 passenger cars, 2nd class, 2 each type Bpmz 857 passenger cars, 2nd class, and 1 type WRkmz 858.1 dining car.

MHI - One Time series

Prototype: DB type Bpmz 291 open seating car. All of the cars look as they did from 1979-1982. Era IV-V

Prototype: DB type Bpmz 291 open seating car. All of the cars look as they did from 1979-1982. Era IV-V

Prototype: SBB type Bcm Eurofima slumber car. All of the cars look as they did from 1979-1982. Era IV

Prototype: French State Railways (SNCF) class 232 TC as it looked in Era III.

Prototype: German Federal Railroad (DB) class 221 (former V 200.1) heavy diesel hydraulic general-purpose locomotive. The locomotive looks as it did in Era IV around 1985. Era IV

Prototype: German Federal Railroad (DB) class 194. The locomotive looks as it did in Era IVb on the Geislingen Grade. Era IV

Prototype: German Federal Railroad (DB) class 515 rechargeable battery powered rail car and class 815 control car in an ocean blue / ivory paint scheme for Era IV. The units look as they did around 1978.

MHI edition | One-Time Series

Prototype: Swiss Federal Railways (SBB/CFF/FFS) class 460 as it looked in Era VI around 2018.

Märklin - Gauge Z - Article No. 8931

The track bumper has an LED for a lighted lantern. Length 16 mm / 5/8". The track bumper can be screwed to the end of the track. Wood screw included.