Prototype: Type Zacns four-axle 95 cubic meter / 25,096 gallon tank car. Privately owned car lettered for Ermewa S.A.S., registered in the Czech Republic. Graphite gray basic paint scheme. The car looks as it did starting in 2015. Era VI

Prototype: German Federal Railroad (DB) type Laaes 541 auto transport car. Bi-level version. The car looks as it did around 1971. Era IV

- Main Catalog H0 2024/2025 739HO2025

Prototype: The car has a closed tarp and separately applied grab irons. The trucks are type Y 25. Length over the buffers approximately 13.8 cm / 5-7/16".

AC wheelset E700150.

Another sliding tarp car with a different car number can be found in the Märklin H0 assortment under item number 47226 with information about the necessary exchange wheelsets.

Prototype: German Railroad, Inc. (DB AG) type Bimdzf 269.2 InterCity cab control car, 2nd class with an engineer's cab for push/pull operation.

Prototype: German Railroad, Inc. (DB AG) type Sdggmrss 738 (T3000e) 6-axle double pocket car with articulation. Modern flat car for combined load service. Traffic red basic paint scheme. Version with two side folding tie bars. The car looks as it did starting in 2013. Loaded with two curtain tarp semi rigs lettered for the freight forwarder LKW Walter. Era VI

Prototype: MFD Rail, Inc. type Sdggmrss 6-axle double pocket car with articulation and curved sides. Modern flat car for combined load service. Granite gray basic paint scheme. Version with four side folding tie bars. The car looks as it did starting in 2021. Loaded with two curtain tarp semi rigs lettered for the freight forwarder Mars. Era VI

Prototype: German Federal Railroad (DB) type Rs 684 flat car. European standard car with a length of 19.90 meters / 65 feet 3-7/16 inches. Loaded with lumber from the firm Pfleiderer. Era IV.

Prototype: German Railroad, Inc. (DB AG) two-axle type Fcs 092 side dump car. Golden yellow body with a black frame. Promotional lettering on the sides on the upper part of the body for the 125th anniversary of the firm Leonhard Weiss, Göppingen, Germany. The car looks as it currently does in 2024. Era VI

Special model, only available in the Märklin-Stores

Prototype: Type Sggrss 80 6-axle double container transport car with articulation, for combined load service. Reddish brown basic paint scheme. CD Cargo a.s., as a subsidiary of the Czech State Railroad. Loaded with two 40-foot box containers. The car looks as it currently does in real life.

Prototype: T12 German Federal Railroad (DB) type Tals 968 four-axle, high-capacity hinged roof cars. Used to transport moisture-sensitive bulk freight. Reddish brown basic paint scheme. All the cars have 2 transition platforms. 6 cars have a handbrake at one transition platform and 6 do not have a handbrake. Type 665 trucks. The cars look as they did around 1984. Era IV

Prototype: Massive Pressure in the Boiler In 1936, the Schwartzkopff Berlin Machinery Construction Company, Inc. delivered the first class 41 fast freight locomotives. These units turned out to be general-purpose locomotives for medium weight trains. Between 1936 and 1941, a total of 366 locomotives of this class were built, of which most were taken over after the war by the German Federal Railroad and the German State Railroad. Era IV

- Main Catalog H0 2024/2026

Prototype: German Federal Railroad (DB) class 211 diesel locomotive. The locomotive looks as it did around 1981. Era IV

Prototype: German Federal Railroad (DB) class 023 passenger steam locomotive with a type 2´2´T31 coal tender. Locomotive from the first production run. Witte smoke deflectors. Locomotive road number 023 011-0. The locomotive looks as it did around 1970. Era IV

Prototype: Express steam locomotive, road number 18 323, with a type 2´2 T29,6 coal tender, German Federal Railroad (DB). Former Baden class IVh. Experimental locomotive at the German Federal Railroad Experimental Office in Minden. Black/red basic paint scheme. Witte smoke deflectors and an inductive magnet on the engineer's side. Smokestack with a Caledonian rim. The locomotive looks as it did around 1966.

- Main Catalog H0 2024/2025 739HO2025

Prototype: Type General Electric ES44AC heavy diesel electric freight locomotive painted and lettered for Kansas City Southern (KCS). Yellow/red/black basic paint scheme. Road number 4848. The locomotive looks as it currently does in real life. Era VI

Prototype: German Railroad, Inc. (DB AG) class 146.5 electric locomotive for long-distance service. Dual system locomotive from the TRAXX type program (P 160 AC2). Light gray long-distance paint scheme with traffic red decorative striping, in the current IC design. Locomotive for the train route: IC 2045 from Cologne to Dresden Main Station. Locomotive road number 146 572-3. The locomotive looks as it did around 2020.

- Main Catalog H0 2024/2025  739HO2025

Prototype: German Federal Railroad (DB) class 193 heavy electric freight locomotive. Chrome oxide green basic paint scheme. 6 sand boxes, startup train lamps, and inductive magnets. Locomotive road number 193 008-0. Stuttgart District, Kornwestheim Maintenance Center. The locomotive looks as it did around 1976. Era IV

Prototype: 4 German Federal Railroad (DB) long distance express train passenger cars. 3 type Am 203 express train passenger cars, 1st class, 1 type Arümh 217 dining car. Era IV

Wilhelminian Era Brick & Stucco Town House Kit | Trix

Article No. 66143 Building - N scale

Wilhelminian Era Stucco Town House Kit | Trix

Article No. 66144 Building - N scale
MSRP $64.99 USD

Wilhelminian Era Corner Town House Kit | Trix

Article No. 66145 Building - N scale
MSRP $79.99 USD

Wilhelminian Era Angled Town House Kit | Trix

Article No. 66146 Building - N scale
MSRP $89.99 USD

Wilhelminian Era Corner Town House Kit | Trix

Article No. 66147 Building - N scale
MSRP $89.99 USD

City Movie Theatre Kit | Trix

Article No. 66148 Building - N scale
MSRP $89.99 USD

Station Platform Kit | Trix

Article No. 66300 Building - N scale
MSRP $79.99 USD

Harbor Warehouse (Shed) w/2 Semi-Portal Level Luffing Slewing Cranes Kit | Trix

Article No. 66302 Building - N scale
MSRP $169.99 USD

Art Nouveau Building Kit | Trix

Article No. 66306 Building - N scale
MSRP $65.99 USD

This is a city building from the Art Nouveau period. The kit is made of colored cardstock, laser cut. This is a kit of a city building with storefronts. It features the finest of details. Extensive instructions for building the kit are included.

Reproduction of metropolitan city buildings.

Dimensions approximately 135 x 83 x 156 mm / 5-5/16" x 3-1/4" x 6-1/8".

This is a corner city building from the Art Nouveau period (90-degree angle). The kit is made of colored cardstock, laser cut. This is a kit of a city building with storefronts. It features the finest of details. Extensive instructions for building the kit are included.

Reproduction of metropolitan city buildings.

Dimensions approximately 85 x 85 x 150 mm / 3-3/8" x 3-3/8" x 5-7/8".

Wilhelminian Era Stucco Town House Kit | Trix

Article No. 66309 Building - N scale
MSRP $89.99 USD

French Station Gare Auvers sur Oise - kit |Trix

Article No. 66330 Building - N scale

City Corner Building - Kit | Trix

Article No. 66331 Building - N scale

City Business Buildings - Kit | Trix

Article No. 66332 Building - N scale

Kit for "Eckartshausen-Ilshofen" Station. This is the Württemberg standard design station in sandstone construction. This kit can be used to build other almost prototypical stations by following the instructions: Sulzdorf, Bretzfeld, Renningen.

The following station signs (also for stations where this kit could serve as a basis) are included: Eckartshausen-Ilshofen, Sulzdorf, Bretzfeld, Renningen, Ditzingen, Fellbach, Willsbach, Neuenstein, Waldenburg, Wasseralfingen, Weinsberg, Lorch, and Rottenburg.

This kit consists of laser-cut, colored architectural hard cardstock. It has the finest laser-engraved details. Extensive instructions for building the kit are included.

Motorized Transfer Table | Trix

Article No. 66540 Building - N scale

TRIX | N-scale (1:160) | Track - accessories | structure

Turntable with 8 Spoke Track, Code 80 track

This is a standard design turntable with a 21 meter / 68 foot 3 inch deck length.

Download the MANUAL

TRIX | N-scale (1:160) | Track - accessories | structure

Turntable extension set, Code 80 track

This set consists of 8 track connection edge segments for attaching to the edge of the turntable. The turntable can be expanded to 24 track connections with 2 expansion sets. The color scheme goes with the 66570 turntable.

TRIX System | power pick-up for passenger cars

This is a connection hardware kit for the 73410 and 73411 lighting kits. It consists of two pickup springs for electrical connections. It can be used for four-axle passenger cars with symmetrical truck mounting.

The 73400 and 73401 lighting kits can also be operated with this connection hardware kit.

Walters Scenemaster | HO scale (1:87) | containers

40' Fully Corrugated Container
Evergreen
3-pack

Walthers SceneMaster HO Scale 40' Hi-Cube Corrugated Containers with Flat Roof and Flat Panel will add a realistic touch to your intermodal terminals, highway scenes and railroad operations. Ready for service on your layout as loads for WalthersProto and WalthersMainline well cars and container flatcars, as well as cars from other manufacturers, 40' Flat Panel Containers have authentic decoration and great detail.

Walters Scenemaster | HO scale (1:87) | containers

40' Fully Corrugated Container
HAPAG-LIOYD
3-pack

Walthers SceneMaster HO Scale 40' Hi-Cube Corrugated Containers with Flat Roof and Flat Panel will add a realistic touch to your intermodal terminals, highway scenes and railroad operations. Ready for service on your layout as loads for WalthersProto and WalthersMainline well cars and container flatcars, as well as cars from other manufacturers, 40' Flat Panel Containers have authentic decoration and great detail.

Bridge Pier for Double-Track Truss Bridge - 5-3/8 x 1-1/8 x 3-3/8" 13.7 x 2.9 x 8.6cm
Walthers Part # 933-1041 (Discontinued at Walthers)
HO scale

This Walthers Cornerstone Bridge Pier simplifies combining multiple spans of the Double-Track Truss Bridge (933-3012, sold separately) in new or existing scenery. The one-piece resin casting is nicely detailed and can be adapted to many other bridge models.

Steel Coil Load -- Kit pkg(12)
Walthers Part # 933-1499
HO scale

Load your steel service cars with this kit. 

For 933-2851, 2859, 2860 and 2618 Turntables Only (Each Sold Separately)
Walthers Part # 933-2320
HO scale

 
The Walthers Cornerstone Turntable Control Box allows you to expand operations of your HO or N Scale Cornerstone Motorized Turntable up to four remote locations. This add-on control box is designed for use with the turntables as noted above. It can be used on layouts running on DC or DCC train control and provides simple operation and programming with programmable indexing for up to 99 different tracks, one-touch 180-degree bridge rotation in either direction and a simplified LED display with adjustable brightness.

For DCC Operation with 933-2851, 2859, 2860 and 2618 Turntables Only (Each Sold Separately)
Walthers Part # 933-2321
HO scale
Download the Instruction Sheet (1825 K bytes, PDF format)
 
The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder with no CV or programming required.

Walthers Part # 933-2602
N scale

Make any siding safer with Walthers Cornerstone N Scale Track Bumpers! Big steel bumpers like this have protected industrial sidings and station platforms for decades by preventing cars from running off the end of the tracks. These bumpers come fully assembled making them a snap to add to your steam or diesel-era scenes. Each set comes with five matching track bumpers that are easily installed on all brands of track.

Walthers Part # 933-2605
N scale

Make any siding safer with Walthers Cornerstone N Scale Track Bumpers! Big steel bumpers like this have protected industrial sidings and station platforms for decades by preventing cars from running off the end of the tracks. These bumpers come fully assembled making them a snap to add to your steam or diesel-era scenes. Each set comes with five matching track bumpers that are easily installed on all brands of track.

Walthers Cornerstone (N scale 1:160)

Motorized 130' Turntable -- Assembled - 10-3/8" 26.3cm Overall Diameter

Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility.

City Water Tower - Assembled - Black - 3-3/4 x 3-3/4 x 11" 9.3 x 9.3 x 27.5cm
Walthers Part # 933-2825
HO scale

The prototypes for the Walthers Cornerstone HO Scale City Water Tower are landmarks in small towns, big cities and factories. In use since the early 1900s, steel Water Tanks like these are still common sights today. Proudly emblazoned with the name of the town or the company, you'll also find them at hospitals, college campuses and military bases.

City Water Tower - Assembled - Silver - 3-3/4 x 3-3/4 x 11" 9.3 x 9.3 x 27.5cm
Walthers Part # 933-2826
HO scale

The prototypes for the Walthers Cornerstone HO Scale City Water Tower are landmarks in small towns, big cities and factories. In use since the early 1900s, steel Water Tanks like these are still common sights today. Proudly emblazoned with the name of the town or the company, you'll also find them at hospitals, college campuses and military bases.

Assembled - 16-7/16" 41.7cm Overall Diameter
Walthers Part # 933-2851
HO scale
Download the Instruction Sheet (2236 K bytes, PDF format)
 
Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 110' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 110' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns and 2-10-2s. It'll look great at your locomotive terminal, at junctions and anywhere else medium-sized steam locomotives must be turned.

Assembled - 19-1/8" 47.8cm Overall Diameter
Walthers Part # 933-2859
HO scale
Download the Instruction Sheet (2183 K bytes, PDF format)

Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most were also placed for access to backshop facilities and servicing tracks. This 130' turntable was about as big as they come - large enough to turn a 4-8-8-4 Big Boy and other large, modern engines.

Walthers Cornerstone (HO scale 1:87)

Motorized 90' Turntable -- Assembled - 13-3/4" 34.9cm Overall Diameter

Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 90' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most smaller turntables were placed adjoining the roundhouse and servicing tracks. This 90' turntable is large enough to turn typical locomotives as large as a 2-8-2 Mikado or 4-6-2 Pacific. It'll look great at smaller terminals, at junctions and anywhere else steam locomotives must be turned. On your layout use the 90' Motorized Turntable as the heart of your servicing facility

Kit - 16 x 20-1/8 x 5-1/2" 40.6 x 51.1 x 14cm
Walthers Part # 933-2900
HO scale

Download the Instruction Sheet (2510 K bytes, PDF format)

The Walthers Cornerstone 3-Stall Modern Roundhouse will be a hallmark of later steam-era railroading on your HO layout. If you model the diesel era you'll also find this kit to be a centerpiece of your servicing facility since some of these classics are still used today for servicing diesels. No matter the weather, workers could easily inspect and service locos under cover. Size was based on the number of engines coming and going in any 24-hour period, with the busiest terminals requiring full-circle roundhouses.

Machine Shop -- Kit
Walthers Part # 933-2902
HO scale
Download the Instruction Sheet (7154 K bytes, PDF format)

This kit matches the design of the Modern Roundhouse (933-2900, sold separately), and can be built as an attached or freestanding building. It also includes a boiler house, which would supply steam, electricity and compressed air to the entire facility. Large roll-up doors can be built open or closed, and the baseplate of the Machine Shop kit has slots that accept popular rail sizes.

Kit
Walthers Part # 933-2903
HO scale
Download the Instruction Sheet (3011 K bytes, PDF format)

As larger engines entered service, many railroads found their older coaling towers couldn't handle the increased demand. By the 1920s, railroads began contracting with outside firms to build new coaling towers. Concrete was the material of choice as it was easy to use, affordable, fireproof and weatherproof. Towers like this were built in yards at servicing facilities as well as along the mainline to refuel engines on the road. This plastic model features realistic concrete walls plus detailed chutes and mechanisms. Like the prototype, it can serve three tracks at once, making it an ideal choice for maximizing service in minimum space.

City Station -- Kit
Walthers Part # 933-2904
HO scale
Download the Instruction Sheet (647 K bytes, PDF format)

Railroads built large, elaborate stations at more important towns that generated a lot of freight and passenger business for the line. Others, such as the county seat, were of local importance. And in some, competition from other railroads led to the building of a bigger and better station facility.
 
The focal point of your city scene, this depot is based on a prototype structure at Wausau, Wisconsin, but is typical of larger, fancier stations built throughout the US. In addition to standard features like the agent's bay window and waiting room, this handsome building boasts a covered end platform and an attached baggage room.

Bridge Crane -- Kit
Walthers Part # 933-2906
HO scale
Download the Instruction Sheet (2835 K bytes, PDF format)

This impressive kit has a modular design and additional parts so you can build a longer or shorter version to fit your available space. With its superbly detailed steel truss work, operators cab, clamshell bucket, trolley and more, it will be a focal point of any scene. On the waterfront, it makes a great stand-alone coal or aggregate dock crane, and its a natural at a steel works handling iron ore, coal, and stone.

Gas Storage Tank -- Kit
Walthers Part # 933-2907
HO scale
Download the Instruction Sheet (3272 K bytes, PDF format)

These massive storage tanks often dominated the city skyline. These black giants were actually the last stop at the plant, used to store and pressurize the gas before it was fed into underground pipelines to supply customers. Gas was produced at a constant rate, so during the hours when demand was lower and more storage capacity was needed, the tank expanded using telescoping sections called "lifts." To keep these aligned as they rose and fell, they rode on a series of guide rails supported by a spider web of steel trusses on the outside of the tank.

Diesel Fueling Facility -- Kit
Walthers Part # 933-2908
HO scale
Download the Instruction Sheet (1145 K bytes, PDF format)

Based on prototypes introduced in the 1940s when railroads began the shift from steam to diesel power, diesel fueling facilities were originally placed on the servicing leads near roundhouses. Today, you'll still find them at terminals where locos are serviced between runs and out on the road at crew change and train inspection points.

Miss Bettie's Diner -- Kit
Walthers Part # 933-2909
HO scale
Download the Instruction Sheet (2981 K bytes, PDF format)

Back when an order for "sinkers and suds" brought you donuts and coffee, gleaming stainless steel restaurants like the Walthers Cornerstone Miss Bettie's Diner sprang up from coast to coast. Resembling railroad dining cars, these structures became hallmarks of the streamline era. Miss Bettie's Diner brings the glitz of those days to the streets of your layout. It's a natural on Main Street or just outside of town along a busy highway.

Clayton County Lumber -- Kit
Walthers Part # 933-2911
HO scale
Download the Instruction Sheet (3034 K bytes, PDF format)

The Walthers Cornerstone Clayton County Lumber is a model of one of the most common trackside businesses. From tiny town to big city, small trackside warehouses are used by companies of every size and kind because they provide a handy place to store and protect merchandise shipped or delivered by rail.

Kit - 6-1/2 x 8-7/8 x 5" 16.5 x 22.5 x 12.7cm
Walthers Part # 933-2913
HO scale
Download the Instruction Sheet (3757 K bytes, PDF format)

Businesses like McGraw Oil Company sold heating oil, diesel fuel and gasoline to consumers and dealers. Each had several storage tanks, a rack and piping for unloading tank cars and pumphouses for loading local delivery trucks. Dealerships like McGraw Oil Co. could be found in small towns and larger cities from the 1930s on, so this kit will look great on your steam - or diesel-era layout.

Magic Pan Commercial Bakery -- Kit
Walthers Part # 933-2915
HO scale
Download the Instruction Sheet (6700 K bytes, PDF format)

This easy-to-build plastic kit is a great, unique industry for your post-1960s HO Scale railroad. The kit includes a main building with truck loading doors, four storage silos with piping and more. The Magic Pan Commercial Bakery buildings are easily arranged to fit your available space. You'll also find this kit great for other businesses such as a plastic molding plants or chemical distributors.

Diesel House -- Kit
Walthers Part # 933-2916
HO scale
Download the Instruction Sheet (3967 K bytes, PDF format)

This Walthers Cornerstone HO Scale Diesel House model is patterned after structures used by railroads across the continent. At many yards, the diesel house is a hotbed of activity. Arriving locomotives are run through the structure where mechanics check them over and make light repairs and adjustments. If major defects are noted, the units are bad ordered and shipped off to the road's backshop for further work.

Lakeville Modern-Style Warehouse -- Kit
Walthers Part # 933-2917, p. 170 Walthers 2020 HO Scale Reference
HO scale
Download the Instruction Sheet (1365 K bytes, PDF format)

The Walthers Cornerstone Lakeville Modern-Style Warehouse brings a general-use warehouse to your 1960s and later industrial parks. Based on a structure with a concrete-block foundation and corrugated metal superstructure, buildings like this can be found across the continent. This kit is a welcome addition to any industrial park. Use it as a destination for boxcars and trucks as well as for light manufacturing. This kit includes multiple truck doors, a railcar door for cars to be unloaded inside and a wall section with windows to simulate a small office.

Open Air Transload Building -- Kit
Walthers Part # 933-2918
HO scale
Download the Instruction Sheet (1655 K bytes, PDF format)

By the 1950s many railroads had outgrown freight houses and other facilities constructed in the early 1900s. The move to larger trucks for final cargo delivery also dictated a purpose-built transload. The kit features a large concrete loading dock, enclosed staging warehouse and sheltered dock. It's patterned after a Santa Fe prototype but is similar to others used across the continent and is a great destination for boxcars and flatcars. It's a natural for detailing with pallets, drums, sacks and forklifts (sold separately) and makes a great stop for way freights and switchers if you're into prototype operations.

Wood Coaling Tower -- Kit - 7-1/2 x 6-1/2 x 10-5/8" 19.1 x 16.5 x 27cm
Walthers Part # 933-2922
HO scale
Download the Instruction Sheet (2285 K bytes, PDF format)

Based on a typical two-track design, the Walthers Cornerstone Wood Coaling Tower will be a focal point in any engine terminal. Towers like this were built in yards at servicing facilities as well as along the mainlines and branchlines to refuel engines on the road. A hopper unloading shed sits along one side for receiving coal. Like the prototype, it can serve two tracks at once, making it an ideal choice for maximizing service in minimum space.

Walthers Part # 933-2923
HO scale

 
Keep your HO diesel fleet ready for the road with the Cornerstone 130' Brick Diesel House. Typical of purpose-built facilities that began appearing in the 1930s and are still used today. 

Washington Salvage Yard -- Kit
Walthers Part # 933-2928
HO scale
Download the Instruction Sheet (1957 K bytes, PDF format)

Combining office and a large work area into one structure, Washington Salvage is typical of the main buildings at many businesses, especially today's materials recycling facilities found in many communities. And, this combination of brick office and steel garage structure has been common since the 1960s, so your model could also serve as a county or city highway department garage, bus barn for a local mass transit authority, construction company offices, a railroad maintenance vehicle garage, truck or farm equipment dealership or any one of hundreds of similar businesses.

Whitehall Station -- Kit
Walthers Part # 933-2932
HO scale

The (Whitehall) depot served travelers until 1949, but remained an active freight agency until 1963. The City of Whitehall purchased the depot in 2003 and restored it as a small museum. The structure remains in its original location along the former GB&W mainline, in 2006 owned by Canadian National. It is listed in the National Register of Historic Places.

Grain Surge Bin -- Kit - 1-1/2 x 1-1/2 x 9" 3.8 x 3.8 x 22.7cm
Walthers Part # 933-2935
HO scale
Download the Instruction Sheet (3747 K bytes, PDF format)

The Walthers Cornerstone Grain Surge Bin is an ideal addition to any diesel-era grain elevator or feed mill scene. Above the surge bin, the funnel-shaped distribution head of the grain conveyor routes grain into the proper pipe, sending it cascading into storage bins, surge bin, covered hopper or grain truck. The surge bin regulates the flow of grain into the grain dryer. The surge bin is a necessary part of any grain handling operation and will add realism to your scene.

NOTE: Photo shows model with the Walthers Cornerstone Grain Dryer 933-3128 (directly underneath the Surge Bin) and Grain Bin 933-3123, both sold separately.

Wet-Dry Grain Storage Bin 2-Pack -- Kit
Walthers Part # 933-2937
HO scale
Download the Instruction Sheet (2444 K bytes, PDF format)

Cornerstone Wet-Dry Grain Storage Bins are signature structures for modern grain-handling scenes. This HO structure kit includes parts for two tall, corrugated-metal structures, perfect for a small facility or as part of a larger complex. If your post-1960s railroad hauls grain, these grain storage bins will look great at any elevator.

Platform and Stairways (Photo-Etched) -- Kit

Walthers Part # 933-2939
HO scale

Upgrade your modern HO Scale industries with the Walthers Cornerstone Platforms and Stairways set of photo-etched brass walkways and work platforms. Designed for easy construction, simply cut, fold and glue.

Conveyor Bridge and Support Tower (Photo-Etched) -- Kit

Walthers Part # 933-2940
HO scale

The Walthers Cornerstone HO Scale Conveyor Bridge and Support Tower add realistic detail for any modern grain-handling operation. Also great for adding detailing at other Cornerstone HO Scale industrial buildings requiring open-air walkways and conveyor supports, this detail kit consists of highly detailed photo-etched brass parts with near-scale thickness.

Modern Grain Head House w/Silos -- Kit
Walthers Part # 933-2942
HO scale
Download the Instruction Sheet (1413 K bytes, PDF format)

The Cornerstone Modern Grain Head House with Silos is patterned after the most identifiable structure in many grain-handling complexes. This detailed HO structure kit includes the roof-mounted head house, a simulated conveyor and eight silos, a truck receiving dock with loading doors and rooftop vent details. A great addition to any grain complex it's ideal for loading covered hoppers, boxcars and trucks in your favorite era.