Affordable, robust, high quality DCC decoder for standard requirements.

The LokPilot Standard decoder generates 0.9A continuous current and easily handles all commonly available DC motors as well as coreless motors. The LokPilot Standard can also be used on analogue DC layouts. The LokPilot Standard decoder has four function outputs

Mobile Control II Remote Control single Handset for ECoS, german / english. With lanyard and USB-cable

The Mobile Control II applies the WLAN standard for communicating with the ECoS. The Mobile Control II can control all locomotives registered in the ECoS. All important locomotive properties such as name, symbol, function mapping as well as symbols for function buttons will be taken from the ECoS and will be displayed correctly. All accessories and routes displayed on the control panel of the ECoS can be switched. Of course the differentiation between double, treble and quadruple aspects will remain fully intact and displayed with the correct symbol on the display.

power adapter: 15V - 21V / 5A

Input: 120-240 VAC (Euro and US cables)

The stabilized 90VA power supply has more than enough power for most applications. The output voltage can be selected using the potentiometer ranging from 15V to 21V and is therefore suitable for all gauges.

This is an N Scale Decoder with no sound, drop-in fits Kato F Unit Diesel Locomotives (Sold Seperately).

Connect ECoSBoost/Navigator to ECoS with this 7-Pin Mini-Din plug on 6-Pin Mini-Din plug.

If required, SwitchPilot can be augmented with the SwitchPilot Extension Modul: Plugged in at the side of the SwitchPilot, it offers four relay-driven outputs, used for switching potential-free loads, or for polarizing the frog; the ideal supplement for tricky circuitry.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

This switched mode power pack is for connecting to and supplying power to the Märklin 60114 or 60116 Track Box but suitable for many other applications requiring power compatible with this unit.

The input is 120 volts / 60 Hertz

The output 18 volts / 36 watts DC voltage. 

Dimensions 85 x 55 x 74 mm / 3-3/8" x 2-1/8" x 2-7/8".

Connections: Hollow socket 5.5/2.5 mm, positive conductor inside.

The switched mode power pack is authorized for use as a toy and comes in a plastic housing. The 66367 switched mode power pack is designed for use only indoors.

PIKO 55030 |  Switch Decoder
HO and N scale, Retail: $30.99 USD

 
Up to 2 magnetic articles (switches, signals) can be switched via the switching decoders.

The K0D8 is a N-scale drop-in decoder for Kato locomotives.

The new LokPilot Fx Nano is the perfect function decoder for vehicles without a motor offering little space for a decoder but with features such as interior lighting or directional headlights.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

ESU 50210 ECoS 2.1 - ESU Command Station
6A, 7" TFT colour display - 120V

The ECoS 50210 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.

The ECoS has - like most of the recent central stations - a large coloured display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the coloured screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured.

Article No. 6646
120 Volt Transformer. 32 VA. UL tested

The track voltage can be adjusted between 5 and 17 volts (AC). The accessory voltage is 17 volts (AC).

Plastic housing. Dimensions 140 x 120 x 80 cm / 5-1/2" x 4-3/4" x 3-1/8". UL tested.

Only for indoor use.

The LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. LokSound V4.0 decoders can be used on DC as well as on AC layouts. Constant current of 1.1A continuous current are more than enough power for even for long trains. You can also expect excellent motor control with technology that makes it possible to drive your loco very slow on the tracks.

ESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0 ESU is extending the sound library all the time and provides all sounds on our homepage for free download.

6.5 cm (2.5") fullrange speaker with balanced frequency response and very good highs. Especially suitable as built-in speaker for music reproduction and as driver for 100 V network column speakers. Outstandingly high efficiency compared to the small size.

The new ESU CabControl is a complete DCC system which allow you wireless control of your locomotives, accessories and routes. This system use a handheld with Android operating technology interfaced to your lay-out through wireless LAN. Power supply and a smart technology connector box is all included so you can operate your trains as soon as you hook it up to your layout (assuming that you already have DCC or DCC/sound equipped locomotives).

Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

The LokSound 5 L DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

It is intended for use in all applications where the required power exceeds the limits of LokSound 5. Ideally these are 0 gauge vehicles and also smaller 1 gauge locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm it is equipped with a dual speaker output and integral PowerPack.

The LokSound 5L DCC is equipped with a multi-pin connector and is supplied ex works with an adapter board featuring solder pads.

This is a receiver for switching turnouts, signals, and uncoupler tracks. The m83 supports the digital formats Motorola, DCC, and mfx. The digital address can be set by means of coding switches or by means of the programming track in 4 steps. 

Top features of PIKO SmartControl Light…

• SmartControl Light is an affordable and easy-to-use digital system
• Fully NMRA-DCC compatible.  Works with all brands of DCC decoders.
• Maximum output of 2 Amps.
• Operation is and easy and intuitive.
• Control and store up to 9,999 locomotives with up to 24 functions per loco
• One built-in reversing loop output.
• Control up to 20 locos at a time!

This is a switched mode power pack for connections to and supplying power to the 60216, 60226 Central Station as well as the 60213-60215 Central Station and the 60175 and 60174 Boosters. Output 19 volts / 60 watts AC voltage or 15 volts / 50 watts DC voltage (can be switched with a slider switch). This is a tabletop switched mode power pack. It comes in a plastic housing. The unit has mounting tabs. Dimensions 116 x 72 x 65 mm / 4-9/16" x 2-13/16" x 2-9/16". Connections: 4-pin mini DIN high current plug. The 60045 switched mode power pack is designed only for use in dry areas.

Your locomotives look like the real thing. The Digitrax Locomotion System makes them run like the real thing, too!

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

SwitchPilot V3.0, accessory decoder for 4 twin coils magnetic, 2 x Servo, DCC/MM, 1A

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons..

LokSound 5 L is intended for use in all applications where the required power exceeds the limits of LokSound 5. Ideally these are 0 gauge vehicles and also smaller 1 gauge locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm it is equipped with a dual speaker output and integral PowerPack.

The LokSound 5L is equipped with a multi-pin connector and is supplied ex works with an adapter board featuring solder pads.

Gauge 1 - Article No. 60195

100 VA, 120 Volt Switched Mode Power Pack

This switched mode power pack is for connecting to and for powering the 60216, 60226, as well as 60214/60215 Central Stations, and the 60174 and 60175 Boosters. The input is 120 volts / 60 Hertz, and the output is 19 volts / 100 watts DC voltage. 

North American Version
Retail: $229.95 USD
 
A complete DCC starter system in the palm of your hand! Includes many of the features of the NCE Powerhouse PH-PRO, but at a lower price. Operates up to 6 trains plus extra cabs. Wireless compatible. Includes 120/230V power supply.

DS51K1 Stationary Decoder For Single Kato Unitrack Turnouts, easy cost effective way to add DCC control to your Kato Unitrack Turnouts.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

35020 Transformer 120V / 20V / 6A (G-Scale)

Features 120V transformer provides 20V DC / 6A of continuous power. Ideal power supply for the 35010 Digital Central Station, 35015 Digital Booster, 35002 Analog Throttle and other devices. Modern "switching power supply" technology provides high power and excellent voltage stability in a small, lightweight unit. Safety agency approved

Not for use with PIKO SmartControl System components

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

For Kato N-Scale Budd RDC.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

This set is the ideal way to start out in Digital Control (DCC and mfx). It includes a Trix Mobile Station control system which is easy to use in both DCC and mfx. If you are using locomotives with mfx protocol the controller will automatically recognize and load the profile of the locomotive (Name, Class, Icon, Address, Function buttons and more). All you need to do is place the locomotive on the track. In DCC mode you have full control of the CVs and can build and store your own locomotive profile. Up to 40 profiles can be stored for direct access.

This set can be expanded with the Trix C Track extension sets and with the entire Trix C Track program

Code 83: The rail profile is 2.1 mm / 0.083" high

As a multi-protocol controller, the Central Station 3 plus with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories. The Central Station Plus has a built-in s88 connection

NOTE: The power supply is not included. You may need to get the 60045 switched mode power pack.

The TSU-1100 is one of our smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

As a multi-protocol controller, the Central Station 3 with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories.

NOTE: The power supply is not included. You may need to get the 60045 switched mode power pack.

- 

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

This is a Multi Protocol digital hand control unit for both DCC and mfx locomotives and accessories. 40 locomotives can be controlled with direct access*. Up to 32 locomotive functions and 320 solenoid items can be controlled

NOTE: The 66955 is the controller (only). You will also need the track connector box (60116) and a power adapter (66367)

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

Package of 4 gaskets for mounting our 25 x 14mm oval speakers.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

A very important part of the LokSound system is the speaker. Therefore, we only use specially developed loudspeakers geared to the sound decoder. Here we recommend the following old saying, the bigger the speaker, the better the sound. As such, we offer loudspeakers in various sizes, one of them will surely fit into your loco. Should there not be enough space, you can also install the speaker in a ‘ghost waggon’ directly behind the loco.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. The M4 protocol supports the automatic registration on mfx® compatible central units.

The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.

The LokSound 5 decoder can reproduce up to 10 channels simultaneously.

The 55016 PIKO SmartController Light includes the SmartController Light remote and cable.  The central station is NOT included in the purchase of this SmartController Light.  The digital central station for HO-, N-, and TT-Scales is offered in the 55017 SmartControl Light Basic Set.

The 55016 SmartController is an add-on remote, exactly the same as the SmartController Light in the 55017 Basic Set, so additional users can all enjoy SmartControl Light together.  

Magnetically shielded 4 x 7 cm (1.6" x 2.8") fullrange driver with good efficiency and balanced frequency response with a clear highrange reproduction. Extremely small size due to a neodymium magnet system. Applicable as built-in speaker in TV's and PC's with very small mounting space.

Package of 4 gaskets for mounting our 40 x 20mm oval speakers.

Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price.

The ECoS (ESU Command Station) is so powerful and capable that many model railroaders would like to replace their present digital station with an ECoS. It is now possible to connect your controllers like Digitrax® and Uhlenbrock® handheld throttles directly to the ECoS, thanks to the ESU L.Net Converter. Additionally, you can continue to use your feedback devices which support the well-known Loconet® communication protocol