Shipping Policy

The LokSound 5 L DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct has been specially developed for installation in N scale locomotives by Atlas and Intermountain. It can be inserted directly instead of the analog board installed there as standard.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato Japan has been specially developed for installation in Kato-branded track N vehicles.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in N scale vehicles by Kato USA. This decoder can replace the analog board installed as standard on most N scale locomotives by Kato USA. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shopping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct has been specially developed for installation in N gauge locomotives of the Atlas and Intermountain brands manufactured pre 2016. It can be inserted directly instead of the analog board installed as standard.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA SC44 was specially developed for installation in some Kato USA N gauge vehicles: It fits in all Kato N scale locomotives Siemens SC44 “Charger” or MP36 instead of the standard analog board. 

........................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA SD90 was specially developed for installation in some Kato USA N gauge vehicles like the SD90, SD90/43MAC, SD80MAC. and SD70ACu models instead of the standard analog board. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro is a "little wonder": With only 21mmx10mm footprint, it is by far the smallest LokSound decoder. Thus, it should be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC decoder is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

With its unique design the LokSound 5 Direct DCC can easily replace boards that provide poor motor control, low volume, or generally inferior sound. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC decoder is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.

Please note the LokSound 5 DCC decoder does not come with a speaker.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The NEW LokSound 5 DCC Direct, with integrated PowerPack, can easily replace boards that provide poor motor control, low volume, or generally inferior sound. 

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

LokSound 5 Nano DCC - ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT

LokSound 5 Nano DCC with single wires has a size of 19.6mm x 8.5mm x 5.3mm

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

LokSound 5 Nano DCC - ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT

LokSound 5 Nano DCC with E24 interface has a size of 19.6mm x 8.5mm x 3.2mm

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

LokSound 5 Nano DCC - ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT.

LokSound 5 Nano DCC with Next18 interface has a size of 15mm x 9.5mm x 3.5mm

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokSound 5 micro DCC Direct Kato USA Widebody has been specially developed for installation in wide body N gauge locomotives by Kato USA brand. These models may also be easily retrofitted with a LokSound decoder.

..........................................

HobbyTech can load your preferred sound file.
The LokSound decoder is ready for your choice of prototypical sound. It is preloaded with a basic sound file intended for testing only.

First Step: Add your decoder to the Shipping Cart

Second Step: Visit these links to select and add the sound file suitable to your locomotive:

== LokSound 5 North American and Australian Sound files

== LokSound 5 European Sound files

Want to do it yourself?
Get your own LokProgrammer and add a new dimension to your hobby.

The LokPilot 5 Basic is a "pure-bred" DCC decoder.

While LokPilot 5 decoders can undoubtedly meet all requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.

The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.

The LokPilot 5 Basic is a "pure-bred" DCC decoder.

While LokPilot 5 decoders can undoubtedly meet all requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.

The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.

The LokPilot 5 L finds its place wherever the LokPilot 5 no longer “fits” in terms of performance. Ideally, these are vehicles of nominal size 0, but also gauge 1 vehicles that are to be equipped without noise are conceivable application scenarios. The LokPilot 5 L is mechanically compatible with the LokSound 5 L decoder and has the same connection pins.

The LokPilot 5 L decoder is always equipped with pin headers and is delivered ex works with an adapter board that has solder termination points.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 is a real multi-protocol decoder.; DCC as well as Motorola®, Selectrix® and M4.

In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

The LokPilot 5 is a true multi-protocol decoder.; DCC, Motorola®, Selectrix® and M4.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are available.

"MKL" for Märklin by ESU. Many newer Märklin locomotives and some British locomotives with a 21-pin interface, may not adhere to the standard design of the 21MTC interface. These locomotives require amplified signals at the AUX3 and AUX4 outputs which you will get with "MKL" decoders.

The LokPilot 5 decoder can also be used in analog DC and AC mode.

The LokPilot 5 DCC is a "pure-bred" DCC decoder. with 14 to 128 speed steps and 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

LokPilot 5 decoders are offered with all common interfaces

The LokPilot 5 DCC decoder can also be used on analog DC trains. The top speed can be set separately. The decoder switches between the operating modes (DCC / DC) fully automatically "on-the-fly".

"MKL" for Märklin by ESU; Many newer Märklin locomotives and some British locomotives with a 21-pin interface, may not adhere to the standard design of the 21MTC interface. These locomotives require amplified signals at the AUX3 and AUX4 outputs which you will get with "MKL" decoders.

The LokPilot 5 micro DCC Direct is the “twin” of the LokSound 5 Nano DCC. With its dimensions of 66.0mm x 8.2mm it has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.

The LokPilot 5 micro DCC Direct Kato USA has been specially developed for installation in N scale locomotives of the Kato USA brand. This decoder can be easily installed in most American diesel locomotives of this manufacturer instead of the analog board installed as standard.

The LokPilot 5 micro DCC Direct Kato USA with its dimensions of 60.0mm x 10.1mm is a pure DCC decoder.

The LokPilot 5 micro DCC Direct Atlas Legacy has been specially developed for installation in N gauge locomotives of the Atlas and InterMountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also be used for similar models from other manufacturers at your own discretion.

The LokPilot 5 micro DCC Direct Atlas Legacy is also a “direct style" decoder developed for early (before 2016) Atlas, InterMountain (and others). The decoder was made for locos produced before sound was added during production.

The LokPilot 5 micro DCC Direct Atlas Legacy is the twin to the LokSound 5 micro DCC Direct Atlas Legacy and shares the same dimensions of 66.0mm x 8.2mm.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

The LokPilot 5 micro DCC is a "pure-bred" DCC decoder with 14 to 128 speed steps and 2- or 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail¬ComPlus®, the decoders log on to a suitable DCC System fully automatically.

The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".

The LokPilot 5 DCC decoder delivers up to .75A of motor current. Enough juice for most motors.

he LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano DCC is equipped with the E24 interface, which will fit into many newly released N gauge locomotives.

The LokPilot 5 micro DCC Direct Kato USA Widebody is the “twin” of the LokSound 5 micro DCC Direct Kato USA Widebody.

With its dimensions of 47.5mm x 14.0mm x 4.5mm it has been specially developed for installation in wide body N gauge locomotives of the Kato USA brand: Most diesel locomotives of this manufacturer come with only a common DC lighting board. Finally, these models can also be easily retrofitted with a LokPilot 5 Decoder.

The LokSound V4.0 M4 is the world´s first Quad-protocol decoder! Aside from DCC, Motorola® and Selectrix®, all incorporated into the LokSound V4.0, the LokSound V4.0 M4 also speaks the M4 protocol! Thus the decoder is a 100% compatible to all mfx®-capable command stations on the market. It will be automatically recognised and can be fully programmed.. That´s why the decoder is “first choice” for all Märklin fans who do not want to miss out on mfx®.

This adapter is suitable for N-scale DC, DCC controllers and accessories.

INPUT: 120VAC 60 Hz 23W

OUTPUT: 12V DC 1A

MODEL: AM-1201000D41

The bottle contains 50 ml / 1.69 oz of alcohol-based steam and cleaning distillate. It is suitable and usable for all smoke generators, all sizes and track widths. Includes 2 pipettes for precise dosing. The particularly prototypical steam development created by this distillate makes the experience of the steam locomotive appear even more lively and the illusion of a hard-working steel animal is perfect. It is also suitable for cleaning the tracks and most dirt, for example on locomotives and wagons. Information on hazardous substance information and the safety data sheet can be found here (Hazard Notes, Safety Data Sheet).

The bottle contains 250 ml / 8.45 oz of alcohol-based steam and cleaning distillate. It is suitable and usable for all smoke generators, all sizes and track widths. Includes 2 pipettes for precise dosing. The particularly prototypical steam development created by this distillate makes the experience of the steam locomotive appear even more lively and the illusion of a hard-working steel animal is perfect. It is also suitable for cleaning the tracks and most dirt, for example on locomotives and wagons. Information on hazardous substance information and the safety data sheet can be found here: Hazard Note, Safety Data Sheet).

Comprehensive description of the Märklin Digital System. In this book you get all of the essential information about the Central Station 3 with Software Version 2.5: including digital control with the Central Station 3, conversion to digital operation of locomotives and trains, tips for automated processes, designing track plans. 220 pages in format Din A4. English language version.

This is a switched mode power pack for connections to and supplying power to the 60216, 60226 Central Station as well as the 60213-60215 Central Station and the 60175 and 60174 Boosters. Output 19 volts / 60 watts AC voltage or 15 volts / 50 watts DC voltage (can be switched with a slider switch). This is a tabletop switched mode power pack. It comes in a plastic housing. The unit has mounting tabs.

Dimensions 116 x 72 x 65 mm / 4-9/16" x 2-13/16" x 2-9/16".

Connections: 4-pin mini DIN high current plug.

The 60045 switched mode power pack is designed only for use in dry areas.

NOTE: The unit is not exactly as shown on the picture.

This switched mode power pack is for connecting and supplying power to the 60216, 60226 as well as 60213-60215 Central Station and the 60175 and 60174 Boosters. The input is 230 volts / 50 Hertz / the output 19 volts / 60 watts DC voltage. This table-top switched mode power pack is authorized for use with toys and comes in a plastic housing. Mounting tabs are included.

Dimensions 116 x 72 x 65 mm / 4-9/16" x 2-7/8" x 2-9/16".

Connections: 4-pin mini DIN high current plug.

The 60061 switched mode power pack is designed for use indoors.

NB: 230V for Europe

This is for connecting a 66360/66510/66367 switched mode power pack and up to 2 Mobile Stations (60657 for Märklin and 66955 for TRIX).

Dimensions 96 x 85 x 40 mm / 3-3/4” x 3-3/8” x 1-9/16”

This WLAN receiver box is for wireless control using the MS WLAN (60667 WLAN Mobile Station) or the Infrared Controller supplied in some Starter Sets. It serves as an adapter for operation with the Digital Connector Box (60114, 60116) or a Central Station (60216, 60226, as well as 60213-60215). This unit allows you to couple the MS WLAN (60667) or the Start-Up infrared controllers with these devices to control your locomotives and other devices.

Gauge 1 - Article No. 60195

100 VA, 120 Volt Switched Mode Power Pack

This switched mode power pack is for connecting to and for powering the 60216, 60226, as well as 60214/60215 Central Stations, and the 60174 and 60175 Boosters. The input is 120 volts / 60 Hertz, and the output is 19 volts / 100 watts DC voltage. 

This connector adapter is for connections from users such as lights to a switched mode power pack with a 4-pin mini DIN high current plug.

This is a 10-pin to 7-pin adapter cable for connecting a the 60653 Mobile Station, the 60652 Mobile Station, and the 66950 Trix Mobile Station to the 60125 Terminal and a 3rd Mobile Station to the 60213-60215 Central Stations.

This cable can also be used to connect a second 60652 Mobile Station to the 24088 feeder track or to the 60115 Connector Box (H0) or 60111 Connector Box (Märklin 1).

As a multi-protocol controller, the Central Station 3 plus with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories. The Central Station Plus has a built-in s88 connection

NOTE: The power supply is not included.
You may need to get the 60045 switched mode power pack.

As a multi-protocol controller, the Central Station 3 with its high resolution, modern color touch screen, 2 locomotive controllers as well as a built-in central track diagram control board offers the possibility of simple, easy control of locomotives and of the entire layout. Up to 32 functions can be controlled on locomotives, and up to 320 Motorola or 2,048 DCC solenoid items can be controlled among accessories.

NOTE: The power supply is not included. You may need to get the 60045 switched mode power pack.

- 

This is a digital hand control unit (mfx and DCC). 11 locomotives can be controlled with direct access by selecting locomotive profiles stored in a quick access list. These profiles can be built manually (DCC or mfx digital address, locomotive icons and various function icons), by accessing built-in Märklin Digital locomotive database, or automatically for locomotives with digital decoders in the mfx format. 

Note: The Mobile Station need to be connected to a Connector Box (sold separately): 60116 or 60113 for HO or N-scale or the 60112 for 1 Gauge. The Connector Box will need a power supply like the 66367 (sold separately). The connector box is then supplying both power and digital signals to your track and accessories by two wires.

Wireless Operating Enjoyment
The MS WLAN feature an interactive display and a newly designed control knob

Note: The Mobile Station WLAN require CS2 or CS3/CS3+ with a WLAN connection or the 60117 WLAN Receiver Box is required as a receiver.

Operate your layout wirelessly with one hand by using the Mobile Station WLAN!

The k 83/m 83/m 84 Universal Power Supply Unit is for supplying power to k 83, m 83, and m 84 decoders from the 66361/66360/66365/66367 switched mode power packs. One Universal Power Supply Unit is required per group of accessory decoders (note the maximum power limit!).

This is a receiver for switching turnouts, signals, and uncoupler tracks. The m83 supports the digital formats Motorola, DCC, and mfx. The digital address can be set by means of coding switches or by means of the programming track in 4 steps. 

This is a receiver for turning on/off continuous current for lighting, motors, Hobby color light signals (74371, 74380, 74391), and other electrical accessories. The m 84 supports the digital formats Motorola, DCC, and mfx. 

This decoder is for converting Märklin/Trix H0 locomotives with built-in high-efficiency motors or other DC motors. The märklin LokDecoder3 has a 21-pin interface connector and an accompanying interface connector circuit board for upgrading analog and digital locomotives. The märklin LokDecoder3 supports the digital formats mfx, MM1, MM2, and DCC

This is a circuit board with 2 buffer capacitors with each 1 Farad for connection to the mLD3 und mSD3, item numbers 60972, 60975, 60976, and 60977. The buffer capacitor prevents light flickering and sound dropout from dirty track sections.

This switched mode power pack is for connecting to and supplying power to the 60114 or 60116 Track Box. The input is 100-240 volts / 50-60 Hertz (Note: For use in the USA and Canada: Only 100-120 Volts input) / the output 18 volts / 36 watts DC voltage. This switched mode power pack is authorized for use by children. Dimensions 85 x 55 x 61 mm / 3-5/16" x 2-1/8" x 2-3/8". Connections DC plug: 5.5/2.5 mm.

The 66366 switched mode power pack is for use only in dry areas.

Article No. 6646
120 Volt Transformer. 32 VA. UL tested

The track voltage can be adjusted between 5 and 17 volts (AC). The accessory voltage is 17 volts (AC).

Plastic housing. Dimensions 140 x 120 x 80 cm / 5-1/2" x 4-3/4" x 3-1/8". UL tested.

Only for indoor use.